• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.215-223
• /
• 2009

A design methodology for transformers including integrated and center-tapped structures for LLC resonant converters is proposed. In the LLC resonant converter, the resonant inductor in the primary side can be merged in the transformer as a leakage inductance. And, the absence of the secondary filter inductor creates low voltage stress on the secondary rectifiers and is cost-effective. A center-tapped structure of the transformer secondary side is widely used in commercial applications because of its higher efficiency and lower cost than full-bridge structures in the rectifying stages. However, this transformer structure has problems of resonance imbalance and transformer inefficiency caused by leakage inductance imbalance in the secondary side and the position of the air-gap in the transformer, respectively. In this paper, gain curves and soft-switching conditions are derived by first harmonic approximation (FHA) and operating circuit simulation. In addition, the effects of the transformer including integrated and center-tapped structures are analyzed by new FHA models and simulations to obtain an optimal design. Finally, the effects of the air-gap position are analyzed by an electromagnetic field simulator. The proposed analysis and design are verified by experimental results with a 385W LLC resonant converter.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.802-816
• /
• 2018

A digital direct phase-shift control (DDPSC) method based on the phase-shifted full-bridge LLC (PSFB-LLC) converter is presented. This work combines DDPSC with the conventional linear control to obtain a hybrid control strategy that has the advantages of linear control and DDPSC control. The strategy is easy to realize and has good dynamic responses. The PSFB-LLC circuit structure is simple and works in the fixed frequency mode, which is beneficial to magnetic component design; it can realize the ZVS of the switch and the ZCS of the rectifier diode in a wide load range. In this work, the PSFB-LLC converter resonator is analyzed in detail, and the concrete realization scheme of the hybrid control strategy is provided by analyzing the state-plane trajectory and the time-domain model. Finally, a 3 kW prototype is developed, and the feasibility and effectiveness of the DDPSC controller and the hybrid strategy are verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.263-266
• /
• 2002

In this paper, It is indicating that an issues of the conventional boost converter for high frequency induction heating. To improve those issues, it is proposed, simulated and analyzed that the current resonant circuit, simulated. As the result, we knew that the proposed circuit has a good point to improve the waveform of input current and to make high efficiency. On the other side, in the inverter for the high current power supply, it is proposed that the high frequency inverter of the half bridge topology, be done the circuit analysis to extract the optimal circuit parameter. It is making sure of the soft switching operating by the inductor to reverse parallel connected on the inverter main switch, decreasing the surge voltage when the switch is turn-off by compulsion, and repressing the switch current and bringing the high current amplitude operation by the multi resonance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.142-145
• /
• 2001

I did research or design technology of(integration) network of PSTN and PSDN in this paper. Network structure model in association with soft switching and access gateway can create various services based on web and live time and service fee at the rate of bandwidth which can't be provided by existing network based on SONET. Also, interns of capability(function) of each area and construction of local network subscribers, it has great recovery capability by separating each network as local areas. It indicates that it can additionally maximize the application of its own communication network and drastic reduction of communication cost because it is alternated to exclusive usage cost.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.325-328
• /
• 2005

EEFLs are mostly driven by sinusoidal wave driving method although EEFLs (External Electrode Fluorescent Lamps) are driven by both sinusoidal wave and square wave. The sinusoidal driving method reduces the cost and allows more power efficiency since this driving method can reduce the voltage stress of EEFL inverter switches and achieve the soft switching of the switches. And a transformer should be used in the inverter since the high voltage should be applied to the both ends of EEFL to turn on the lamp. However, the power loss mainly occurs at the transformer in the sinusoidal wave driving method. In order to remove the transformer which makes the power loss, a new method is presented. In this paper, the square wave is applied directly to the both ends of EEFL by a proposed two-stage inverter. Moreover, the luminance and power efficiency will be compared between the common sinusoidal wave driving method and square wave driving method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.1
• /
• pp.14-20
• /
• 2012

This paper presents a design and topology selection of bi-direcional buck converter based on PV PCS for managing the electric power. Futhermore, Current Ringing on DCM bi-directional buck converter for soft switching is analyzed in detail. PSIM Simulation and Experiments at the various operating points show the propriety of this paper. Building on the result of simulation and experiment, a comparative analysis is performed with the approximate estimate. By use of a study, the selecion of switch and diode which improve efficiency of the overall system is appiled to DCM bi-directional buck converter based on PV PCS.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.303-304
• /
• 2013

기술이 발전함에 따라 전력변환기의 소형화 고효율화가 요구되어지고, 이를 위해 고주파 스위칭 전력변환기가 필요로 하게 된다. 하지만 스위칭 주파수와 비례적으로 스위칭 손실이 증가하기 때문에 시스템의 효율이 감소한다. 이러한 문제를 해결하기 위해 DCM방식이나 공진을 이용한 ZVZCS(Zero-Voltage Zero-Currrent) 컨버터가 제안되고 있으나 소자의 정격용량이 커지는 단점을 갖는다. 또한 ZVT(Zero-Voltage Transition)를 포함한 소프트 스위칭 기법을 적용하는 다양한 컨버터가 제안되고 있으나 공진전류의 첨두에서 보조스위치가 스위칭을 하게 되어 보조스위치 스위칭 손실이 큰 단점이 있다. 본 논문에서는 변압기로 공진인덕터의 전압을 제한시켜 보조 스위치가 영전압/영전류 스위칭을 하게 함으로서 스위칭 손실을 발생시키지 않는 소프트 스위칭 구조를 제안한다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.266-268
• /
• 2009

In this paper, authors deal with a power conditioning system (PCS) of high efficiency for a proton exchange membrane fuel cell (PEMFC) generation system. Fuel cells are a direct current (DC) power generators. They generate electricity through an electrochemical process that converts the energy stored in a fuel directly into electricity. Fuel cells have many benefits, which produce no particulate matter, nitrogen or sulfur oxides. And they have few moving parts and produce little or no noise. When fueled by hydrogen, they yield only heat and water as byproducts. Their wide application can reduce our dependence on fossil fuels and foreign sources of petroleum. This paper studies on a novel PCS circuit topology of high efficiency using in PEMFC generation system The controlling switches in the PCS is operated to soft switching. Some digital simulation results and experimental results for the proposed PCS is confirmed to the validity of the analytical results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.561-569
• /
• 1999

In this paper, the diode bridge-type ZVT(Zero- Voltage Transition) inverter is proposed. It consists of one a auxiliaI${\gamma}$ switch, three resonant inductors and six blockin당 diodes. So, the main advantage of the proposed t torXJ!ogy is the reduction of the auxiliar${\gamma}$ switch compare to the conventional ZVT inverter. The topology of t the propostxl lVT inverter is analyztxl with a description of the control conditions based on the load current. A And the resonant period control for operating the proposed inverter optimally is discussed by using resonant i inductor current ftxxlback. To verify the proposed topology, the detailed simulation and exJX끼mental results i indicate that zero volta당e operation during transition can be achieved.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.131-138
• /
• 2006

An active clamp ZVS PWM forward converter using a secondary synchronous switch control is proposed in this paper. The proposed converter is suitable for low-voltage and high-current applications. The structure of the proposed converter is the same as a conventional active clamp forward converter. However, since it controls the secondary synchronous switch to build up the primary current during a very short period of time, the ZVS operation is easily achieved without any additional conduction losses of magnetizing current in the transformer and clamp circuit. Furthermore, there are no additional circuits required for the ZVS operation of power switches. Therefore, the proposed converter can achieve high efficiency with low EMI noise, resulting from soft switching without any additional conduction losses, and shows high power dens~ty, a result of high efficiency, and requires no additional components. The operational principle and design example are presented. Experimental results demonstrate that the proposed converter can achieve an excellent ZVS performance throughout all load conditions and demonstrates significant improvement in efficiency for the 100W (5V, 20A) prototype converter.