• Clean Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2006

In this study, aqueous polyurethane dispersion(PUD) was synthesized using polyhexamethylene carbonate glycol (PHMCG) as soft segment, isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as hard segment. Also, polyurethane/clay nanocomposites were prepared by adding pristine montmorillonite (PM) and organically modified clays, C15A and C30B into PUD. The degree of clay dispersion in the nanocomposites was investigated using XRD and the physical and thermal properties were examined through UTM and TGA. These results showed that nanocomposites with C15A gave higher physical and thermal properties than those with C30B or PM. As a result, the properties of nanocomposites were observed to vary depending on the types of clay modifiers and clay contents.

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.97-100
• /
• 1997

We treated a 56 year old male ailing of painful herpetic eruption on his 2nd, 3rd and 4th left cervical spinal segment. On the 18th day, patient also suffered an abrupt left facial palsy, accompanied with ongoing postherpetic neuralgia even though the skin eruption had been cured. This patient visited our pain clinic on his 46th day of illness and was teated with continuous cervical epidural block for 9 days, and stellate ganglion block plus oral analgesics and antidepressant for 12 days. The combination of treatments resulted in marked improvement of facial palsy and postherpetic neuralgia. A possible explanation of facial palsy accompanied with herpes zoster on cervical spinal segment could be related to Hunt's hypothesis that geniculate ganglion forms a chain connecting the high cervical ganglion below. Another possibility may be related to a compression injury of the facial nerve by long-term severe edema on the soft tissue of the face, the periauricular area and parotid gland around the facial nerve, and edema on the facial nerve itself emerging out from the cranium.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.105-105
• /
• 2012

기능성 아웃도어 제품을 제조하기 위해서 사용되어지는 멤브레인은 크게 미세다공형과 친수무공형으로 구분할 수 있다. 최근에는 소비자들이 기능성 아웃도어에 쾌적성을 요구하고 있으며, 그 측면에서 본다면 미세다공형 멤브레인이 친수무공형보다 유리하다. 기존의 미세다공형 멤브레인은 고가이며, casting이 불가능한 단점을 가지고 있다. 본 연구에서는 분자구조 및 유화제 첨가에 따른 casting이 가능한 미세다공형 폴리우레탄 멤브레인의 특성에 대하여 연구하였다. Casting용 미세다공형 폴리우레탄은 soft segment와 hard segment의 비가 1/2일 때, 그리고 사용되는 용제가 MEK 단독일 때 안정적인 반응성과 이상적인 필름의 물성을 보이는 것을 확인 하였으며, 수지에 첨가되는 분산유화제의 양이 10%이상일 때 상분리 현상이 발생하지 않음을 확인 할 수 있었다. 개발된 수지의 적용성을 평가한 결과, J-knife를 이용하여 knife over roll 방식으로 25~35$g/m^2$ (dry add on)를 도포하여 $80/120/140^{\circ}C{\times}10m/min$의 다단건조 공정으로 진행했을 때 최적의 물성을 얻을 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.2
• /
• pp.177-187
• /
• 2016

To evaluate the tractive performance of tracked trencher on seafloor surface, a new shear stress-displacement empirical model was proposed for saturated soft-plastic soil (SSP model). To validate the SSP model, a test platform, where track segment shear test can be performed in seafloor soil simulacrum (bentonite water mixture), was built. Series shear tests were carried out. Test results indicate that the SSP model can describe the mechanical behavior of track segment with good approximation in seafloor soil simulacrum. Through analyzing the main external forces applied to seafloor tracked trencher during the uniform linear trenching process, a drawbar pull prediction model was deduced with the SSP model. A tracked walking mechanism of the seafloor tracked trencher prototype was built, and verification tests were carried out. Test results indicate that this prediction model was feasible and effective; moreover, from another side, this conclusion also proved that the SSP model was effective.

• Journal of Digestive Cancer Research
• /
• v.2 no.1
• /
• pp.32-36
• /
• 2014

We report a patient with combined hepatocellular-cholangiocarcinoma confined in the common hepatic duct and scirrhous type of hepatocellular carcinoma in the caudate lobe of liver simultaneously. The patient was a 55-yearsold Korean man with hepatitis B virus (HBV) carrier who was referred from a local hospital due to detected liver mass on abdominal computed tomography (CT). He has presented jaundice and weight loss for the previous 3 weeks. Laboratory examination showed AST/ALT elevation and hyperbilirubinemia. HBsAg was positive. The tumor marker study showed elevated AFP and DCP, not CEA and CA 19-9. Abdominal CT disclosed an about 2.1×0.9 cm sized soft tissue density in hilum with both intrahepatic duct (IHD) dilatations and an about 3×2.1 cm sized arterial enhancing lesion at segment 8 of the liver. Patient received 15 cycles of Gemcitabine/Cisplantin chemotherapy from February 27, 2013 to December 31, 2013. Caudate lobectomy of liver, segmental resection of bile duct and Roux-en-Y hepaticojejunostomy was performed on February 10, 2014. The final pathologic report showed double primary liver cancer, combined hepatocellular-cholangiocarcinoma in common hepatic bile duct and scirrhous type of hepatocellular carcinoma in segment 1 of the liver. This is a very unusual case in which combined hepatocellular-cholangiocarcinoma confined in the large bile duct and two rare hepatic cancers coexisted.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.71-77
• /
• 2001

Unsaturated polyester(UP) resin is one of the major thermosetting resins. It is very useful as the matrix resin of the composite material because of its low viscosity. The polymer resin, however, has several drawbacks; The volume shrinkage occurs during the crosslinking reaction of the UP resin with styrene monomer and the resulting polymer is weak to the alkali and also brittle. The mechanical properties of UP resin can be improved by blending various materials. In this study, polyurethane(PU) was used as a modifier in order to enhance the toughness of the UP resin. The goal of the research is to study the effect of the polyol molecular weight as a PU soft segment and the PU contents on the toughness of PU-modified UP resins. UP/PU polymer network may occur through the reaction between isocyanate group in the methyldiisocyanate(MDI) and hydroxyl group in the UP molecules. The maximum toughness value was shown at 2 wt% of the PU content. This effect results from the incorporation of the PU segment into the UP resin.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.140-145
• /
• 2005

Effects of the polyol type and the hard segment content of thermoplastic polyurethane (TPU) on the crystallization of hard segments in TPUs were studied employing differential scanning calorimetry. Diols used for the preparation of TPUs were poly(tetramethylene ether glycol) (PTMEG), poly(propylene glycol) (PPG), polycaprolactone (PCL), poly(butylene adipate) (PBA) the molecular weights of which were 2000 and the hard segments contents of TPUs were $35\~44\;wt\%$. We found that crystallization of hard segments in TPUs were observed at higher temperatures and became faster with increasing hard segment contents of TPUs. The crystallization rate of TPU was also affected by the types of polyols used for the preparation of TPUs. It is postulated that lower miscibility of soft segments and hard segments results in higher crystallization rate and increase of cooling crystallization temperatures due to better hydrogen bending between hard segments in melts.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.253-259
• /
• 2005

Polyurethanes, synthesized by polyester polyols and aliphatic or aromatic diisocyanates for a crease resist finishing agent, were prepared by two-step reactions, that is, prepolymer synthesis and chain extension. The structures of synthesized polyurethanes were confirmed by the measurement of FT-IR and $^1H$-NMR spectrometer. The number average molecular weight ($\bar{M}_n$) and the weight average molecular weight ($\bar{M}_w$) of the polyurethane with aromatic diisocyanate (MDI) were higher than those of the synthesized polyurethanes with aliphatic diisocyanate (HDI, $H_{12}MDI$). The glass transition temperatures ($T_g$) of soft segments in polyurethanes with MDI, HDI, $H_{12}MDI$ were -25,-42 and -50$^{circ}C$, respectively. In the polyurethanes obtained by two-step reaction, thermal stability and tensile strength increased with increasing hard segment contents, whereas elongation at break decreased with increasing hard segment contents.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.673-680
• /
• 2019

GAP or GAP-co-BO based energetic thermoplastic elastomers (ETPEs) were synthesized by changing the hard segment content percent in the range of 30~45% by 5% difference. Thermal and mechanical properties of GAP-co-BO based ETPEs were compared to those of GAP based ETPEs. FT-IR results showed that the capability of forming hydrogen bond increases with increasing the hard segment content in GAP/GAP-co-BO based ETPE, and also the GAP-co-BO based ETPEs are stronger than GAP based ETPEs in the hydrogen bond formation. DSC and DMA results showed that the glass transition temperature (T_g) of GAP based ETPEs increased with the increment of the hard segment content, while the T_g of GAP-co-BO based ETPEs was maintained even the hard segment content increased. The storage modulus at room temperature of the GAP-co-BO based ETPEs was higher than that of the GAP based ETPEs. This was due to the strong phase separation behavior of the hard and soft segment of GAP-co-BO based ETPEs, which further resulted in the stronger breaking strength and lower tensile elongation at break point for GAP-co-BO based ETPE than the GAP based one.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.28-38
• /
• 2010

The factors influencing the relapse and recurrence of skeletal deformity after the orthognathic surgery include various factors such as condylar deviation, the amount of mandibular set-back, stretching force by the soft tissues and muscles around the facial skeleton. The purpose of this report is to recognize and analyze the possible factors of reoperation after orthognathic surgery, due to early relapses. Six patients underwent reoperation after the orthognathic surgeries out of 110 patients from 2006 to 2009 were included in this study. In most cases, clincal signs of the insufficient occlusal stability, anterior open bite, and unilateral shifting of the mandible were founded within 2 weeks postoperatively. Although elastic traction was initiated in every case, inadequate correction made reoperation for these cases inevitable. The chief complaints of five cases were the protruded mandible combined with some degree of asymmetric face and in the other one case, it was asymmetric face only. Various factors were considered as a major cause of post-operative instability such as condylar sagging, counter-clockwise rotation of the mandibular segment, soft tissue tension related with asymmetrical mandibular set-back, preoperatively existing temporomandibular disorder (TMD), poor fabrication of the final wafer, and dual bite tendency of the patients.