• 시큐리티연구
• /
• 제47호
• /
• pp.85-117
• /
• 2016

최근 IS테러단체의 테러공습이 유럽뿐만 아니라 아시아로까지 확대되면서 더 이상 우리나라도 테러의 대상에서 안전한 국가가 될 수 없는 상황에 이르렀다. 특히 소프트타깃 테러는 소규모 인원에 의한 소형무기로 무장하여 기습적인 공격을 감행할 수 있다는 점과 이를 통하여 대량인명살상이 가능하다는 점은 불특정 다수의 일반인에게 테러에 대한 공포심을 극대화 시킬 수 있다. 따라서 프랑스 파리테러를 비롯하여 아시아 최초로 발생한 인도네시아 자카르타 도심에서 발생한 테러 모두 소프트타깃 테러로 많은 부상자와 사상자를 냈다. 따라서 본 연구에서 IS테러단체의 테러행위에 대한 심각성을 인식하고, IS테러단체의 공습확대에 따른 자국 내 소프트타깃 테러발생 가능성에 대해 외국의 사건사례 등을 검토하여 소프트타깃 테러를 예방하고 대응할 수 있는 방안을 모색해 보고자 하였다. 그 결과 자국내 IS테러단체에 의한 소프트타깃 테러발생 가능성은 존재하며 그 원인에 대한 대응방안은 다음과 같다. 우선, 자국내 체류외국인에 대한 부정적인식과 제노포비아 현상은 IS테러단체와 자생적 테러범의 연계를 통한 소프트타깃 테러행위를 발생시킬 수 있는 원인이 되기 때문에 자국내 체류외국인 등에 대한 인식의 전환과 인종차별과 관련되어진 법제도의 제정과 실행이 있어야 하며 다음으로는 테러방지법의 시행을 통한 테러의 예방과 대응에 있어서 한기관의 권력의 집중과 견제 그리고 국민의 개인정보와 관련하여 인권침해를 최소화 할 수 있도록 테러방지법안의 수정 및 보완이 필요하다. 그리고 마지막으로 행사장, 번화가의 건물 등에서 테러발생시 피해를 최소화하고 소프트타깃 테러에 대비 할 수 있는 피난모의시뮬레이션의 지속적인 개발과 이에 대한 활용이 있어야 할 것이다.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.1-7
• /
• 2018

In this paper, we propose soft dead pixels detection method by analysing different response at hot and cold images. Abnormal pixels are able to effect detecting a small target. It also makes confusing real target or not cause of changing target size. Almost exist abnormal pixels after image signal processing even if dead pixels are removed by dead pixel compensation are called soft dead pixels. They are showed defect in final image. So removing or compensating dead pixels are very important for detecting object. The key idea of this proposed method, detecting dead pixels, is that most of soft deads have different response characteristics between hot image and cold image. General infrared cameras do NUC to remove FPN. Working 2-reference NUC must be needed getting data, hot & cold images. The way which is proposed dead pixel detection is that we compare response, NUC gain, at each pixel about two different temperature images and find out dead pixels if the pixels exceed threshold about average gain of around pixels.

• 한국진공학회지
• /
• 제16권4호
• /
• pp.305-310
• /
• 2007

W-target 투과양극형 x-ray tube를 개발하고, 특성을 조사하였다. 관전압이 12kV이하에서는 연속 x-ray만 방출되었고, 12kV 이상에서부터 특성 x-ray가 관측되었다. 연속 x-ray와 특성 x-ray의 에너지 분포 및 선량 특성을 조사한 결과 알려진 결과와 잘 일치함을 알 수 있었다. 또한 상용화된 제품과의 비교에서, 기존 제품 이상의 성능을 가질 수 있음을 확인하였다. 따라서 본 연구에서 개발된 x-ray tube는 상용화할 수 있을 만큼 충분히 우수한 특성을 가지고 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.264-266
• /
• 2009

A skill is defined as the special ability to do something well, especially as acquired by learning and practice. To learn a skill, a Bayesian network model for representing the skill is first learned. We will regard the Bayesian network for a skill as an affordance. We propose a soft Behavior Motivation(BM) switch as a method for ordering affordances to accomplish a task. Then, a skill is constructed as a combination of an affordance and a soft BM switch. To demonstrate the validity of our proposed method, some experiments were performed with GENIBO(Pet robot) performing a task using skills of Search-a-target-object, Approach-a-target-object, Push-up-in front of -a-target-object.

• 대한의용생체공학회:의공학회지
• /
• 제26권1호
• /
• pp.55-63
• /
• 2005

A novel imaging system for High-resolution Ultrasonic Transmission Tomography (HUTT) and soft tissue differentiation methodology for the HUTT system are presented. The critical innovation of the HUTT system includes the use of sub-millimeter transducer elements for both transmitter and receiver arrays and multi-band analysis of the first-arrival pulse. The first-arrival pulse is detected and extracted from the received signal (i.e., snippet) at each azimuthal and angular location of a mechanical tomographic scanner in transmission mode. Each extracted snippet is processed to yield a multi-spectral vector of attenuation values at multiple frequency bands. These vectors form a 3-D sinogram representing a multi-spectral augmentation of the conventional 2-D sinogram. A filtered backprojection algorithm is used to reconstruct a stack of multi-spectral images for each 2-D tomographic slice that allow tissue characterization. A novel methodology for soft tissue differentiation using spectral target detection is presented. The representative 2-D and 3-D HUTT images formed at various frequency bands demonstrate the high-resolution capability of the system. It is shown that spherical objects with diameter down to 0.3㎜ can be detected. In addition, the results of soft tissue differentiation and characterization demonstrate the feasibility of quantitative soft tissue analysis for possible detection of lesions or cancerous tissue.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.29-33
• /
• 2017

In order to solve this sort of electrostatic failure in Display and Semiconductor process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. There exist variable factors such as type of tungsten thickness deposited on target, Anode voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. Here, MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was compared according to target material thickness using MCNPX and actual X-ray tube source under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W). At the result, In Tube voltage 5 keV and distance 100 mm, optimal target thickness is $0.05{\mu}m$ and fastest decay time appears + decay time 0.28 sec. - deacy time 0.30 sec. In Tube voltage 10keV and distance 100 mm, optimal target Thickness is $0.16{\mu}m$ and fastest decay time appears + decay time 0.13 sec. - deacy time 0.12 sec. In the tube voltage 15 keV and distance 100 mm, optimal target Thickness is $0.28{\mu}m$ and fastest decay time appears + decay time 0.04 sec. - deacy time 0.05 sec.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• 분석과 대안
• /
• 제2권2호
• /
• pp.1-30
• /
• 2018

The concept of soft power presents both theoretical and practical difficulties for researchers and policy makers. This essay examines the practical use of soft power and argues that soft power resources in education are important for attracting individuals to migrate between countries and assimilate to the new language and culture of the new location. Japan's attempts to utilize soft power resources in its educational system have provided mixed results dependent on the target population. Japan has successfully attracted individuals into fields related to higher education much more so than skilled labor programs. This essay discusses the importance of educational soft power resources in Japanese strategy to increase educated working population that is assimilated to Japanese language and culture. After reviewing the literature on soft power in Asia, and Japanese cultural integration policies, the essay examines three cases of Japanese educational soft power - the JET Programme, the caregiver-training program, and internationalization of university programs. In addition, the essay shows that Japan is more successful attracting higher educated individuals seeking higher paying employment rather than skilled labor through these programs.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.34-37
• /
• 2017

In recent emerging industry, Display field becomes bigger and bigger, and also semiconductor technology becomes high density integration. In Flat Panel Display, there is an issue that electrostatic phenomenon results in fine dust adsorption as electrostatic capacity increases due to bigger size. Destruction of high integrated circuit and pattern deterioration occur in semiconductor and this causes the problem of weakening of thermal resistance. In order to solve this sort of electrostatic failure in this process, Soft X-ray ionizer is mainly used. Soft X-ray Ionizer does not only generate electrical noise and minute particle but also is efficient to remove electrostatic as it has a wide range of ionization. X-ray Generating efficiency has an effect on soft X-ray Ionizer affects neutralizing performance. There exist variable factors such as type of anode, thickness, tube voltage etc., and it takes a lot of time and financial resource to find optimal performance by manufacturing with actual X-ray tube source. MCNPX (Monte Carlo N-Particle Extended) is used for simulation to solve this kind of problem, and optimum efficiency of X-ray generation is anticipated. In this study, X-ray generation efficiency was measured according to target material thickness using MCNPX under the conditions that tube voltage is 5 keV, 10 keV, 15 keV and the target Material is Tungsten(W), Gold(Au), Silver(Ag). At the result, Gold(Au) shows optimum efficiency. In Tube voltage 5 keV, optimal target thickness is $0.05{\mu}m$ and Largest energy of Light flux appears $2.22{\times}10^8$ x-ray flux. In Tube voltage 10 keV, optimal target Thickness is $0.18{\mu}m$ and Largest energy of Light flux appears $1.97{\times}10^9$ x-ray flux. In Tube voltage 15 keV, optimal target Thickness is $0.29{\mu}m$ and Largest energy of Light flux appears $4.59{\times}10^9$ x-ray flux.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1559-1566
• /
• 2023

This study developed a quasi-monoenergetic neutron source (QMN) for the semiconductor device's soft error rate test (SER). Quasi-monoenergetic neutrons are generated by ⁹Be(p, n)⁹B nuclear reaction with a 1 mm beryllium target and 30 MeV protons from a cyclotron. An 8 mm water in the back of the beryllium target is used for avoiding proton penetration. The neutron spectra simulated by MCNP showed that the peak energy was around 26.5 MeV. The heat flow and mechanical properties are numerically analyzed, and the safe operating conditions are therefore determined.