• 한국안광학회지
• /
• 제3권1호
• /
• pp.249-258
• /
• 1998

소프트 콘택트렌즈의 착용자에 대한 실태와 문제점에 대한 결과는 다음과 같다. 1. 최초의 콘택트렌즈 착용자의 가장 많은 연령층은 19세이며, 가장 먼저 착용한 연령은 15세이고, 가장 늦게 착용한 연령은 26세이다. 2. 처음 콘택트렌즈의 착용할 때의 시력검사 장소는 대게 안경원이다. 3. 현재 사용하고 있는 콘택트렌즈의 구입처는 대부분 안경원이다. 4. 현재 사용하고 있는 렌즈는 거의 소프트 렌즈이다. 5. 현재 사용하고 있는 렌즈의 생산국은 국내생산이 가장 많고, 모르는 것, 그리고 외국생산품 있다. 6. 콘택트렌즈 착용 후 시력을 알고 있는 사람은 거의 적으며, 특히 양안 시력을 알고 있는 사람은 특히 드물다. 7. 현재 사용하고 있는 소프트 콘택트렌즈의 색깔에 대해서는 10대에서는 무색이 가장 많고, 20대에서는 유색이, 그리고 30대에서는 거의 모르고 있다. 8. 소프트 콘택트렌즈의 장점에 대해서는 10대와 20대에서는 한 개정도, 30대에서는 전혀 모르는 것이 가장 많았다. 9. 소프트 콘택트 렌즈의 단점에 대해서는 10대와 30대에서는 한 개이나, 20대에서는 2개 정도 알고 있는 것이 가장 많았다. 10. 소프트 콘택트렌즈의 착용에 대한 부작용에 대해서는 10대에서는 한가지, 20대와 30대에서는 전혀 모르는 것이 가장 많았다. 11. 소프트 콘택트렌즈의 착용자에 대한 주요 자각증상에 대해서는 모두 7가지가 있으나, 전혀 자각증상이 없는 것이 가장 많고, 다음은 잘모르는 것, 그리고 자각증상이 있는 것에서는 통증이 가장 많았다. 12. 현재 착용하고 있는 소프트 콘택트렌즈의 부작용이 있는 렌즈의 현미경적 표면 조사에서는 렌즈의 파손, 렌즈의 중첩, 이물질의 침착 등이 주로 나타났다. 이상의 연구에서 현재 착용하고 있는 렌즈는 대게 소프트 렌즈이며, 구입처는 안경원이며, 소프트 렌즈에 대한 피검자의 지식과 시력에 대한 지식은 아주 적은 편이다. 따라서 현실적으로 볼 때에 안경사의 소프트렌즈에 대한 관리 및 취급을 할 수 있도록 법적 또는 교육적 지원이 있어야 한다고 생각된다.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.33-43
• /
• 2013

Purpose : The study was designed to identify the change of body alignment according to surface during walking with backpack. Methods : Healthy twenty people(10 men & 10 women) participated in this study. The exclusion criteria were orthopedic and neurologic disease. Initial alignment measurements were performed. Results were evaluated by angle and range from earlobe to acromion, acromion to malleolus and earlobe to malleolus in the GPS system. Results : On the hard surface, the distance and angle from malleolus to earlobe increased after walking with backpack which is 20 % of weight(p<.05). In addition the distance from malleolus to acromion and the angle from earlobe to acromion increased(p<.05). On the soft surface, on the other hand, the distance and angle from malleolus to earlobe decreased after walking with backpack which is 20 % of weight(p<.05). There was no relationship between the change of the surface and the body's alignment(p>.05). Conclusion : Consequently, the body alignment was changed by backpack which is 20 % of weight, but body alignment wasn't changed by the surface. So more study need to be surveyed regard of this.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.572-578
• /
• 2011

In this paper, the result of study on the effectiveness of anti-submarine defense plan according to the disposition of surface ships has been proposed. The surface ship carries a hull mounted sonar(HMS) as a underwater sensor and a torpedo acoustic counter measure(TACM) as a soft-kill weapon against torpedo attacks from the enemy. Nowadays these underwater systems have been combined into a integrated anti-submarine warfare combat system. And in the real anti-submarine operation environment, several surface ships cooperate for executing ASW plans. Considering these ASW systems and the ASW environment, the models of underwater systems mounted on an surface ship and the a general model of anti-submarine defense plan are proposed. And we designed a scenario for conducting simulations to evaluate the ASW plan according to the variation of the range and the relative angle between surface ships and a capital ship. The simulation results show the effectiveness of ASW plan depends on the formation of surface ships and a capital ship.

• 한국표면공학회지
• /
• 제53권6호
• /
• pp.360-368
• /
• 2020

Wear resistance of cutting tools is one of the most important requirements in terms of the durability of cutting tool itself as well as the machining accuracy of the workpiece. Generally, tungsten carbide ball end mills have been processed with hard coatings for high durability and wear resistance such as diamond coating and tetrahedral amorphous carbon(ta-C) coating. In this study, we developed multilayer ta-C coatings whose wear resistance is comparable to that of diamond coating. First, we prepared single layer ta-C coatings according to the substrate bias voltage and Ar gas flow, and the surface microstructure, raman characteristics, hardness and wear characteristics were evaluated. Then, considering the hardness and wear resistance of the single layer ta-C, we fabricated multilayer coatings consisting of hard and soft layers. As a result, it was confirmed that the wear resistance of the multilayer ta-C coating with hardness of 51 GPa, and elastic recovery rate of 85% improved to 97% compared to that of the diamond coated ball end mill.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.263-270
• /
• 1999

In country, for 2002 World-cup the peak is to construct soccer playground. the stabilizing method by additives is mainly applied of permanent improvement for bearing capacity of structure foundation and for strength, durability and transformation of road pavement layer except for construction machine's trafficability and bearing capacity. This study is on soft ground improvement of $\bigcirc$$\bigcirc$ world-cup stadium field. construction field constitutes of very various layers and after construction the lawn grass should be planted on the surface of the earth and in addition, chemical effects should be limited from improved ground layer. Mixing soft clay in field with three domestic representative additives, it evaluated the unconfined compression strength. In the results, after curing during 28 days the objective strength has been obtained on about 5% combination ratio.

• 펄프종이기술
• /
• 제30권4호
• /
• pp.69-78
• /
• 1998

Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1110-1116
• /
• 2010

Void ratios are one of the key parameters for exact calculation of settlement of soft groundse. In the study, shear wave velocities of a soft ground were used to measure the field void ratio using bender elements sensors. The bender-element probes were installed in situ at the depths of 3, 5 and 8m on a pre-loading site near Incheon, Korea. During 90 days after installation, the changes of shear wave velocity and ground surface settlement were measured. The field void ratio was estimated from measured shear wave velocities. The void ratio estimated by the shear wave velocity measured by bender elements agrees well with the measured values in the field.

• 한국의류산업학회지
• /
• 제13권2호
• /
• pp.155-161
• /
• 2011

This thesis, concerning Femme Fatale Images Costume Form in paintings viewed from DeLong's Theory, analyzed frequency and traits on the basis of DeLong's Form Observation Theory and drew out the result as followings. First, Costume Form was mostly open, whole, planer integration, rounded, and indeterminate. The styles were similar each other. Second, surface structure was expressed by line & shape, color, texture, and pattern of which color had the highest priority. Next, line & shape and texture had the priority in order. They were expressed through intereaction. Third, the traits of Costume Form were a similar color harmony or large light and darkness contrast+soft quality+interaction by ambiguous line & shape. So, Femme Fatale Image in paintings was expressed by soft and pure images and erotic images.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.613-616
• /
• 2007

The main structures that comprise a tidal power plant are turbine structure, sluice structure, tide embankment and gate. Since these structures are founded on seabed ground, an extensive geotechnical site investigation to evaluate the engineering properties of field soils must be conducted prior to design and construction. According to the results of geotechnical site investigation conducted at the planned site for construction of Incheon bay tidal power plant, soft ground generally lie 7 meters below the seabed surface level. This research suggests the reliable and economical design of foundations and ground improvements required for construction of main structures in Incheon bay tidal power plant, with considerations on field conditions.

• 한국농공학회논문집
• /
• 제47권5호
• /
• pp.51-61
• /
• 2005

In this study, borehole records were analyzed to verify the amplification of seismic motion at the soft reclaimed ground before and after the main event of the 1995 Hyogoken Nambu Earthquake at Port Island, Japan. From the analysis, it was shown that the amplification of seismic motion occurred near the soft ground surface (within 30 m below) where confining stress is low. Moreover, it was found that recovery of dynamic soil stiffness at the liquefied ground began gradually 3 hours after the liquefaction and completed in 10 days, when the ground exhibited the same seismic motion characteristics as those before the liquefaction.