• Journal of the Korean earth science society
• /
• v.44 no.6
• /
• pp.594-610
• /
• 2023

The horizontal-to-vertical spectral ratio (HVSR) has been widely applied to evaluate ground characteristics such as site response and thickness of the soft sedimentary layer on top of the bedrock via dominant frequencies and amplification factors of microtremors. Eight seismic stations were selected to investigate the HVSR results at the surface and at varying depths, and their variations due to wind speeds. These stations are equipped with seismic sensors on the surface and downhole(s) at depths. The borehole data analysis reveals that the geological condition at burial depth influences the HVSR results. Their dominant frequencies indicate the entire thickness of the soft layer, not the thickness to the bottom or top of the soft sedimentary layer from the seismometer burial depth. Analysis of the background noise observed at the surface showed that the resonance frequency estimation varied with wind speed changes. In the studied cases, the background noise observed in the sedimentary layer at depths of 20 to 66 meters yielded stable and consistent resonance frequency estimation regardless of wind speed fluctuations. The results of the seismic sensors buried deeper than 100 meters are unstable. The result indicates that the background noise from the buried seismometer at shallow depths (~0.3 m) under light wind conditions (wind speeds less than 3 m/s) is sufficient to achieve the purpose of the HVSR analysis.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.249-258
• /
• 1998

This study was researched the state and problem of the soft contact Lens wear by the history and inverted microscopy. The results was as follows; 1. The first use of contact lens wear was the 15 years and the last use was the 26 years. The first age of most contact lens wear was the 19 years. 2. In the almost contact lens wearers, the first visual test was the optical shop. 3. At present, almost soft contact lens purchase the optical shop 4. At present, most contact lens wearer like a soft type. 5. At present, most soft contact lens were a domestic production, and some subjects were foreign country production, but some subjects were unknown. 6. After contact lens wear, most subjects don't known the corrected visual acuity, especially, almost people don't known the binocular visual acuity. 7. At present, on soft contact lens color, the teens like the non-color contact lens, twenties like the color contact lens, but thirties was not known. 8. On the advantage of soft contact lens knowledge, most teens and twenties were only one, thirties was unknown. 9. On the disadvantage of soft contact lens knowledge, most teens and thirties were only one, twenties were two. 10. On the side effect of soft contact lens wearer, teens was one, and twenties and thirties don't known. 11. On the main symptoms of soft contact lens wearer, total kinds were seven, On these kinds, most subjects were not symptoms, the next order was unknown on the symptom. But, On the symptoms, the main symptoms was the pain and dry eye. 12. At present, the research on the surface morphology of soft contact lens by inverted microscope, the lens repture, lens folding, foreign body immersion and etc were present. Above the study, most contact lens was soft lens, and the purchase was the optical shop, on the other hand, the knowledge of soft contact lens and visual acuity was few. As a results, On the practical problems of soft contact lens wear, the optician have to the soft contact lens treatment and aftercare by law and educational supporting.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.1
• /
• pp.33-43
• /
• 2013

Purpose : The study was designed to identify the change of body alignment according to surface during walking with backpack. Methods : Healthy twenty people(10 men & 10 women) participated in this study. The exclusion criteria were orthopedic and neurologic disease. Initial alignment measurements were performed. Results were evaluated by angle and range from earlobe to acromion, acromion to malleolus and earlobe to malleolus in the GPS system. Results : On the hard surface, the distance and angle from malleolus to earlobe increased after walking with backpack which is 20 % of weight(p<.05). In addition the distance from malleolus to acromion and the angle from earlobe to acromion increased(p<.05). On the soft surface, on the other hand, the distance and angle from malleolus to earlobe decreased after walking with backpack which is 20 % of weight(p<.05). There was no relationship between the change of the surface and the body's alignment(p>.05). Conclusion : Consequently, the body alignment was changed by backpack which is 20 % of weight, but body alignment wasn't changed by the surface. So more study need to be surveyed regard of this.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.572-578
• /
• 2011

In this paper, the result of study on the effectiveness of anti-submarine defense plan according to the disposition of surface ships has been proposed. The surface ship carries a hull mounted sonar(HMS) as a underwater sensor and a torpedo acoustic counter measure(TACM) as a soft-kill weapon against torpedo attacks from the enemy. Nowadays these underwater systems have been combined into a integrated anti-submarine warfare combat system. And in the real anti-submarine operation environment, several surface ships cooperate for executing ASW plans. Considering these ASW systems and the ASW environment, the models of underwater systems mounted on an surface ship and the a general model of anti-submarine defense plan are proposed. And we designed a scenario for conducting simulations to evaluate the ASW plan according to the variation of the range and the relative angle between surface ships and a capital ship. The simulation results show the effectiveness of ASW plan depends on the formation of surface ships and a capital ship.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.360-368
• /
• 2020

Wear resistance of cutting tools is one of the most important requirements in terms of the durability of cutting tool itself as well as the machining accuracy of the workpiece. Generally, tungsten carbide ball end mills have been processed with hard coatings for high durability and wear resistance such as diamond coating and tetrahedral amorphous carbon(ta-C) coating. In this study, we developed multilayer ta-C coatings whose wear resistance is comparable to that of diamond coating. First, we prepared single layer ta-C coatings according to the substrate bias voltage and Ar gas flow, and the surface microstructure, raman characteristics, hardness and wear characteristics were evaluated. Then, considering the hardness and wear resistance of the single layer ta-C, we fabricated multilayer coatings consisting of hard and soft layers. As a result, it was confirmed that the wear resistance of the multilayer ta-C coating with hardness of 51 GPa, and elastic recovery rate of 85% improved to 97% compared to that of the diamond coated ball end mill.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.263-270
• /
• 1999

In country, for 2002 World-cup the peak is to construct soccer playground. the stabilizing method by additives is mainly applied of permanent improvement for bearing capacity of structure foundation and for strength, durability and transformation of road pavement layer except for construction machine's trafficability and bearing capacity. This study is on soft ground improvement of $\bigcirc$$\bigcirc$ world-cup stadium field. construction field constitutes of very various layers and after construction the lawn grass should be planted on the surface of the earth and in addition, chemical effects should be limited from improved ground layer. Mixing soft clay in field with three domestic representative additives, it evaluated the unconfined compression strength. In the results, after curing during 28 days the objective strength has been obtained on about 5% combination ratio.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.69-78
• /
• 1998

Papers loaded with 10-40% $TiO_2$ by dry weight were calendered under the various combinations of calendering conditions such as calender type, linear pressure, and roll temperature. After being calendered, light scattering coefficient, surface roughness, density, and tensile strength of the papers were measured and the results were summerized as follows: 1. To increase the light scattering coefficient of $TiO_2$-highly-loaded paper further by calendering, the calender roll pressure and temperature should be kept low. Under these conditions, the physical strength of the paper was not significantly affected. 2. At low roll temperature, soft nip calender and machine calender type showed the same relationship between paper density and its roughness. At high roll temperature, soft nip calender type gave much lower roughness than machine calender type at the same density. 3. At high roll temperature of both calenders, the density as well as the tensile strength of the TiO$_2$-loaded paper was increased significantly.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1110-1116
• /
• 2010

Void ratios are one of the key parameters for exact calculation of settlement of soft groundse. In the study, shear wave velocities of a soft ground were used to measure the field void ratio using bender elements sensors. The bender-element probes were installed in situ at the depths of 3, 5 and 8m on a pre-loading site near Incheon, Korea. During 90 days after installation, the changes of shear wave velocity and ground surface settlement were measured. The field void ratio was estimated from measured shear wave velocities. The void ratio estimated by the shear wave velocity measured by bender elements agrees well with the measured values in the field.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2011

This thesis, concerning Femme Fatale Images Costume Form in paintings viewed from DeLong's Theory, analyzed frequency and traits on the basis of DeLong's Form Observation Theory and drew out the result as followings. First, Costume Form was mostly open, whole, planer integration, rounded, and indeterminate. The styles were similar each other. Second, surface structure was expressed by line & shape, color, texture, and pattern of which color had the highest priority. Next, line & shape and texture had the priority in order. They were expressed through intereaction. Third, the traits of Costume Form were a similar color harmony or large light and darkness contrast+soft quality+interaction by ambiguous line & shape. So, Femme Fatale Image in paintings was expressed by soft and pure images and erotic images.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.613-616
• /
• 2007

The main structures that comprise a tidal power plant are turbine structure, sluice structure, tide embankment and gate. Since these structures are founded on seabed ground, an extensive geotechnical site investigation to evaluate the engineering properties of field soils must be conducted prior to design and construction. According to the results of geotechnical site investigation conducted at the planned site for construction of Incheon bay tidal power plant, soft ground generally lie 7 meters below the seabed surface level. This research suggests the reliable and economical design of foundations and ground improvements required for construction of main structures in Incheon bay tidal power plant, with considerations on field conditions.