• 제목/요약/키워드: Soft IP

검색결과 70건 처리시간 0.022초

OCB-AES 암호 프로세서의 VLSI 설계 (VLIS Design of OCB-AES Cryptographic Processor)

  • 최병윤;이종형
    • 한국정보통신학회논문지
    • /
    • 제9권8호
    • /
    • pp.1741-1748
    • /
    • 2005
  • 본 논문에서는 암호 기능과 함께 데이터 인증 기능을 지원하는 OCB(offsetest codebook)-AES(advanced encryption) 암호 알고리즘을 VLSI로 설계하고 성능을 분석하였다. OCB-AES 암호 알고리즘은 기존 암호 시스템에서 암호 알고리즘과 인증에 구별된 알고리즘과 하드웨어를 사용함에 따른 많은 연산 시간과 하드웨어 문제를 해결하였다. 면적 효율적인 모듈화된 오프셋 생성기와 태그 생성 회로를 내장한 OCB-AES 프로세서는 IDEC 삼성 0.35um CMOS 공정으로 설계되었으며 약 55,700 게이트로 구성되며, 80MHz의 동작주파수로 930 Mbps의 암${\cdot}$복호율을 갖는다. 그리고 무결성과 인증에 사용되는 128 비트 태그를 생성하는데 소요되는 클록사이클 수는 (m+2)${\times}$(Nr+1)이다. 여기서 m은 메시지의 블록 수이며, Nr은 AES 암호 알고리즘의 라운드 수이다. 설계된 프로세서는 높은 암${\times}$복효율과 면적 효율성으로 IEEE 802.11i 무선 랜과 모바일용 SoC(System on chip)에 암호 처리를 위한 소프트 IP(Intellectual Property)로 적용 가능하다.

낙동강 유역 신항만부지 지역 점토 퇴적물의 광물조성과 토질특성의 상관성 (Correlation analysis between Engineering properties and mineralogy of clay sediments in New Busan Port area of the estuary of the Nakdong River)

  • 이선갑;황진연;정성교;김성욱
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.483-490
    • /
    • 2004
  • Nakdong River Plain and its adjoining sea arc unusually covered by very thick soft clay sediments which were caned Pusan clays, sometimes reaching 40-70m. Since early 1990s a large number of geotechnical investigations have been carried out for land reclamation works in the area, including Busan city and its neighboring cities. Nevertheless, geotechnical engineers have paid little attention to studying geological characteristics on the clays, except some researches related to mineralogy, geo-chemistry, benthic foraminiferal fauna etc. The purpose of reserach is the knowledge of the correlation between engineering properties and mineralogy of clay sediments. The correlation analysis carry out multiple regression that have independent variables (Engineering properties) and dependent variables (mineralogy, geochemistry). Engineering properties of clay are correlated with the mineral compositions and geochemical characteristics. The result of the analysis is Wn = -0,6Feldspar + 1.1pH + 0.01TDS + 27.5, Ip = 0.36Clay + 1.44Vermiculite + 0.94clay mineral - 22.118, PI. = 0.005TDS - 0.31Feldspar + 22.43, eo = 0.02Vermiculite - 0.01Quartz + TDS + 0.93, ${\nu}$t = 0.009Quartz - 0.06Conductivity + 1.67, E50 = 1.94Vermicuhte - 0.96Kaohnite -0.53silt + 49.64, SR = -0.25Kaolinite + 1.5pH -2.3Conductivity, Cc = 0.03pH + TDS -0.2, LL = 0.5Clay + 1.3Vermiculite + 5.5Conductivity + 0.8Caly mineral -20.48

  • PDF

근골격계 종양의 종류에 따른 케모카인 유전자의 발현 (The Expression of Chemokine mRNAs in Musculoskeletal Tumors)

  • 김희선;백원진;이원재;신덕섭
    • 대한골관절종양학회지
    • /
    • 제9권2호
    • /
    • pp.178-189
    • /
    • 2003
  • 목적: 근골격계 종양의 종류에 따른 케모카인 발현 양상을 보고, 원발성 골육종과 재발된 골육종, 골육종의 항암화학요법 전과 후의 발현 차이가 있는지를 조사하고자 한다. 대상 및 방법: 종양조직을 얻을 수 있었던 원발성 양성 및 악성 근골격계 종양 10예, 재발된 골육종 1예, 화학요법 후의 골육종 1예 및 정상조직의 대조군 1예를 대상으로 하였다. RNA를 분리한 다음, 역전사 중합효소 연쇄반응(RT-PCR )과 RNase protection assay (RPA)를 이용하여 싸이토카인과 케모카인의 발현을 조사하였다. 각각의 종양간에 발현도 차이가 있는지를 알기 위하여 SPSS를 사용한 Fisher's exact test를 이용하여 통계적 처리를 하였다. 결과: IL-8과 TNF-${\alpha}$는 모든 조직에서 발현되었고, IFN-${\gamma}$는 2예 외에 모두 발현하였으며, RANTES의 경우 연부조직 종양 5예, 골종양 4예에서, GRO${\alpha}$는 연부조직 종양 1예, 골종양 2예에서 발현되었고, MCP-1과 IP-10의 경우 악성 골종양군에서는 2예만, 나머지에서는 모두 발현되는 다양한 양상을 보였다. 원발성 골육종에 비해 재발된 골육종 조직에서의 발현은 IFN-${\gamma}$를 제외하고, 전반적으로 발현도가 훨씬 강하였으며, 모든 종류의 케모카인 및 사이토카인들이 발현되었다. 화학요법 후에는 RANTES와 IFN-${\beta}$만이 발현되었으며, TGF${\beta}$ isoform 중 TGF${\beta}_1$ 유전자의 발현만 관찰되었다. 결론: 대상의 수가 적어 통계적 분석을 통한 정확한 자료의 제시는 불가능하였으나, 연부조직 종양과 골종양에 있어 일부 케모카인 및 사이토카인의 발현 차이가 있음을 확인하였고, 골육종의 경우 IFN-${\gamma}$ 및 TGF-${\beta}$ isoform의 발현 분석이 종양의 재발과 치료 후 변화에 대한 지표에 응용될 가능성이 있음을 제시하였다.

  • PDF

Effects of Media Composition on Plant Regeneration and Callus Formation of Abeliophyllum distichum Nakai

  • Lee, Cheol-Hee;Jin, Yeon-Hee;Chang, Young-Deug;Hwang, Ju-Kwang
    • 한국자원식물학회지
    • /
    • 제21권3호
    • /
    • pp.184-191
    • /
    • 2008
  • This experiments were carried out to find out the effects of different explant materials, kinds and concentration of plant growth regulators, and total nitrogen and sucrose contents on the in vitro regeneration of Abeliophyllum distichum Nakai. The effects of growth regulators on regeneration from 3 explant sources (leaf, internode and node) were more or less same. Leaf explants produced only callus with 2ip (Isopentenyladenine) and NAA (Naphthaleneacetic acid) treatment and other regulators had no effects. Test with internode explants yielded about same results but callus was obtained with 2,4-D (2,4-Dichlorophenoxyacetic acid). Node explants resulted in shoot regeneration by all regulator treatment except NAA and 2,4-D, but control also showed similar results. Callus formation from internode and node explants was vigorous by 2ip, zeatin, and 2,4-D treatments and high NAA concentration resulted in higher callus formation. In this experiment, various mixed treatment of growth regulators were also employed, using node as explant material. Shoot regeneration was obtained with BA (Benzyl adenine) + NAA treatments but the results were comparable with control. Generally shoot and root regeneration was poor with all combined treatment except 2ip + NAA and 2,4-D + NAA. However, callus was formed readily with all treatments. In this experiment, combined treatments of regulators were applied on the callus derived from singular regulator treatment. The results showed no shoot and root regeneration with any combination of 2,4-D, IAA (Indoleacetic acid) and NAA, but soft milky white callus was formed in all the treatments. No shoot and root regeneration was observed with any combination of 2iP, NAA and IAA, but somewhat hard, light green callus was formed in all the treatments. Callus formation decreased with high kinetin concentration in case of kinetin + NAA treatment. The experiments with total nitrogen content of media showed that low concentrations of 15 and 30mM were effective for the shoot and root regeneration. Sucrose experiment demonstrated shoot regeneration with 1${\sim}$4% concentration, and root and callus formation with 2${\sim}$4%. No root and callus formation was observed with 0 and 1% sucrose.

Secure Face Authentication Framework in Open Networks

  • Lee, Yong-Jin;Lee, Yong-Ki;Chung, Yun-Su;Moon, Ki-Young
    • ETRI Journal
    • /
    • 제32권6호
    • /
    • pp.950-960
    • /
    • 2010
  • In response to increased security concerns, biometrics is becoming more focused on overcoming or complementing conventional knowledge and possession-based authentication. However, biometric authentication requires special care since the loss of biometric data is irrecoverable. In this paper, we present a biometric authentication framework, where several novel techniques are applied to provide security and privacy. First, a biometric template is saved in a transformed form. This makes it possible for a template to be canceled upon its loss while the original biometric information is not revealed. Second, when a user is registered with a server, a biometric template is stored in a special form, named a 'soft vault'. This technique prevents impersonation attacks even if data in a server is disclosed to an attacker. Finally, a one-time template technique is applied in order to prevent replay attacks against templates transmitted over networks. In addition, the whole scheme keeps decision equivalence with conventional face authentication, and thus it does not decrease biometric recognition performance. As a result, the proposed techniques construct a secure face authentication framework in open networks.

IoT 응용을 위한 초경량 블록 암호 알고리듬 PRESENT의 하드웨어 설계 (A Hardware Design of Ultra-Lightweight Block Cipher Algorithm PRESENT for IoT Applications)

  • 조욱래;김기쁨;신경욱
    • 한국정보통신학회논문지
    • /
    • 제20권7호
    • /
    • pp.1296-1302
    • /
    • 2016
  • 경량 암호기술 표준인 ISO/IEC 29192-2에서 블록암호 표준으로 지정된 초경량 블록암호 알고리듬 PRESENT의 하드웨어 구현에 대해 기술한다. 암호 전용 코어와 암호/복호 기능을 갖는 두 종류의 PR80 크립토 코어를 80 비트의 마스터키를 지원하도록 설계하였다. 설계된 PR80 크립토 코어는 블록암호의 기본 ECB (electronic code book) 운영모드를 수행하며, 마스터키 재입력 없이 평문/암호문 블록들을 연속적으로 처리할 수 있도록 설계되었다. PR80 크립토 코어는 Verilog HDL을 사용하여 소프트 IP로 설계되었으며, Virtex5 FPGA에 구현하여 정상 동작함을 확인하였다. 설계된 코어를 $0.18{\mu}m$ 공정의 CMOS 셀 라이브러리로 합성한 결과, 암호 전용 코어와 암호/복호 코어는 각각 2,990 GE와 3,687 GE로 구현되어 적은 게이트를 필요로 하는 IoT 보안 응용분야에 적합하다. 암호 전용 코어와 암호/복호 코어의 최대 동작 주파수는 각각 500 MHz와 444 MHz로 평가되었다.

정책기반 네트워크 관리 환경에서 퍼지 컨트롤러를 이용한 적응적 QoS 정책 제어 (Adaptive QoS Policy Control using Fuzzy Controller in Policy-based Network Management)

  • 임형진;정종필;이지형;추현승;정태명
    • 정보처리학회논문지C
    • /
    • 제11C권4호
    • /
    • pp.429-438
    • /
    • 2004
  • 본 논문에서는 정책기반의 IP 네트워크 관리구조에서 임의의 노드에 유입되어지는 트래픽에 대하여 퍼지 추론 방식을 사용한 어드미션 제어 구조를 설계하였다. 제안된 제어구조는 기존 정의된 정책 요구수준과 네트워크 상태에 따라 자원 할당을 결정하는 방식을 사용하였다. 이는 기존의 바이너리 방식의 정책 적용방식을 개선하여 사전에 정의된 임의의 005 정책에 대하여 예측할 수 없는 네트워크의 상태에 따라 적응적인 어드미션 제어를 제공함으로서 네트워크의 자원을 효율적으로 사용할 수 있도록 하였다. 볼 논문에서 설계한 퍼지 제어기를 통하여 제한된 환경에서의 시뮬레이션을 수행한 결과 비퍼지 환경에 비하여 트래픽의 패턴에 따라 평균 26%의 패킷 거부율을 향상하였고, 이는 퍼지 컨트롤러에 의해서 네트워크의 상태에 따라 비퍼지 환경에서의 수락/거절 동작이 아닌 소프트한 적응성을 보여주었기 때문이다.

WEB 기반의 기업용 RADIUS 무선랜 보안 시스템 개발 (Development of a RADIUS WLAN Security System for Industrial Applications Based on WEB)

  • 정연우;손종윤;전중창;최경선
    • 한국정보전자통신기술학회논문지
    • /
    • 제9권6호
    • /
    • pp.599-603
    • /
    • 2016
  • 최근 네트워크 환경이 모바일 사용자의 증가와 기술적 성능향상으로 유선랜에서 무선랜으로 급격하게 교체되고 있다. 그러나 무선랜은 사용의 편리성만큼 의도하지 않은 자료유출과 같은 보안 취약성의 위협에 노출된다. 따라서 내부 사용자에게는 편리성을 극대화하며 해커로부터는 위협을 회피할 수 있는 안전한 무선랜 보안시스템 개발이 요구된다. 본 연구에서는 모든 무선랜 제조사의 제품과 호환이 가능하고 EAP 인증을 수행할 수 있는 기업용 RADIUS 무선랜 보안시스템을 개발하였다. 본 시스템은 웹기반의 인터페이스를 바탕으로 하고 있으며, 사용자 관리를 위한 DB 접속기능을 제공함으로써 사용자의 PC에서 802.1x 인증접속을 수행할 수 있도록 하였다.

DMA 인터페이스를 갖는 블루투스 기저대역 모듈의 설계 및 구현 (Design and Implementation of a Bluetooth Baseband Module with DMA Interface)

  • 천익재;오종환;임지숙;김보관;박인철
    • 대한전자공학회논문지SD
    • /
    • 제39권3호
    • /
    • pp.98-109
    • /
    • 2002
  • 블루투스 무선 기술은 음성 및 데이터 전송을 위한 단거리 일대다중 무선 주파수 통신을 위해 제안된 범용적으로 사용 가능한 무선통신 기술이다. 블루투스는 2.4㎓ ISM 밴드에서 동작하며 약 l0m 범위의 다양한 이동 장치와 휴대용 장치를 위한 저가격의 기저대역 무선 접속을 제공한다 본 논문은 DMA 방식의 블루투스 기저대역 모듈을 개발하고 그 구조와 테스트 결과를 보인다. 개발된 모듈은 링크 컨트롤러, UART 그리고 오디오 코덱의 세가지 블록으로 구성되며 메인 프로세서 사이의 정보 전달 및 DMA지원을 위한 버스 인터페이스와 RF모듈과의 데이터 송수신을 위한 RF 인터페이스를 지원한다. DMA의 사용은 FIFO를 이용한 데이터의 송수신 방법을 사용하는 기저대역 모듈에 비하여 모듈의 구현 크기 및 데이터의 처리 속도에 있어서도 많은 차이점을 갖는다. 각 블록을 DMA를 지원하도록 설계함으로써 작은 크기의 모듈을 설계할 수 있다. 이러한 작은 크기의 모듈은 생산비용의 절감과 함께 다양한 응용분야에 사용될 수 있는 범용성을 제공한다. 또한 본 모듈은 UART를 이용한 펌웨어 업그레이드 방식을 지원하고 소프트 IP로 설계되었으며 FPGA와 ASIC으로 구현하여 개인용 컴퓨터 사이의 파일 전송과 비트-스트림 전송을 통해 테스트 되었다.

두개저의 크기, 형태 및 두부자세와 악안면구조의 위치적 상관관계 (THE CORRELATION BETWEEN CRANIAL BASE SIZE, SHAPE AND HEAD POSTURE, AND THE POSITION OF MAXILLO-FACIAL STRUCTURES)

  • 홍용석;윤영주;김광원
    • 대한치과교정학회지
    • /
    • 제27권5호
    • /
    • pp.743-760
    • /
    • 1997
  • 두개저의 크기, 형태 및 두부자세가 지니는 두개안면구조의 공간적 수평, 수직적 위치간의 상관성을 파악해 보고자 남자 51명, 여자 49명으로 구성된 표본으로부터 촬영된 100장의 측모 두부방사선사진을 이용, 12개의 계측항목과 37개의 기준점을 설정하고 계측항목에 대한 계측치와 기준점의 수평, 수직 위치를 산출한 다음,이들 간의 상관관계를 통계적으로 분석하였으며 계측항목에서 얻은 계측치의 크기가 크거나 작은 군을 각각 10개 표본씩으로 분류하여 mean facial diagram을 작성, 비교함으로서 다음과 같은 결론을 얻었다. 1. 두개저의 형태변수인 n-s-ba 및 n-s-ar각은 경추의 기준점 cv4ip, cv2ip, cv4tg 그리고 cv2ap의 수평, 수직적 위치 모두에 높은 통계적 유의성의 상관관계를 보였다($0.1\%$ 유의수준). 2. 두개저의 형태변수인 n-s-ba및 n-s-ar각은 안면구조에 있는 대부분의 기준점의 수평적 위치와 상관관계를 보였으나($1\%$ 유의수준), 수직적 위치는 통계적 유의성이 없었다($5\%$ 유의수준). 3. 두개저의 크기변수인 n-s, n-ba, n-ba및 n-ar의 크기는 두개안면구조내 기준점의 위치와 다양한 양상의 상관관계를 보였으나, 대체로 치아, 치조와 관련된 중안면구조의 수평, 수직적 위치와 상관관계가 높았다. 4. 두개저와 경추의 기울기가 이루는 자세변수인 NSL/CVT, NSL/OPT각은 두개안면구조내 기준점의 수평적 위치에 높은 상관성을 지니고 있었으며 통계학적 유의성이 인정되었으나($1\%$유의수준), 수직적 위치와는 통계적 유의성이 없었다($5\%$ 유의수준). 5. 진수평선(true horizontal line)과 경추의 기울기가 이루는 자세변수인 OPT/HOR 및 CVT/HOR각은 두개안면구조내 기준점의 수평, 수직적 위치 모두와 통계적으로 유의성이 인정되는 상관성을 보이지 않았다($5\%$ 유의수준). 6. 연조직에 존재하는 기준점의 수평, 수직적 위치는 모든 변수와의 상관성에서 대부분 경조직의 관련 기준점에 준하는 양상을 보였다.

  • PDF