• 환경위생공학
• /
• 제8권1호
• /
• pp.81-91
• /
• 1993

This paper was carried out to isolate and identify Aeromonas caviae which can degrade Sodium Dodecyl Benzene Sulfonate(SDBS) effectively. And the affecting factors for the ability of bacterial degradation were also studied. Frm October 1991 to February 1992, two hundred samples from sweage in Taegu area and Nakdong river waters in Talsung Gun area were tested. Minimal salt medium which contain SDBS only as a carbon source was used as a culture medium. The isolated new strain was identified as Aeromonas caviae Kim & Kweon. The optimal pH for SDBS degradation were 7.0 and temperature, $32^{\circ}C.$ It was taken 24 hours to degrade SDBS of 20mg/l completely under the optimal pH and temperature. And in the case of 30 mg/l of SDBS, it was taken 36 hours. The nitrogen sources were added to the minimal salt media containing 20mg/l of SDBS, and they were incubated at $32^{\circ}C$ for 14 hours. 86.9% SDBS were degraded after addition of 0.03% peptone as a organic nitrogen source. And 70.5% SDBS after addition of 0.05% ammonium sulfate as a inorganic nitrogen source. In the case of metal compounds(0.015%), the degradation rate for SDBS were 3.5 fold increased in the media containing magnesium chloride and calcium chloride than in the media that were not containing these metal compounds. And where the media containing magnesium chloride was 0.05%, the degradation rate was 65.8%. And above 0.3% NaCI, the degradation rate was decreased slowly.

• 미생물학회지
• /
• 제40권2호
• /
• pp.139-146
• /
• 2004

일반 토양과 부엽토, 퇴비로부터 alkaline cellulase 생성이 우수한 균주를 분리한 후 형태적, 배양학적 및 생화학적 동정을 실시한 결과 호알칼리성 Bacillus sp. HSH-810 균주인 것으로 판명되었다. 분리균 Bacillus sp. HSH-810의 생육과 효소 활성은 $30^{\circ}C$와 pH 10.0에서 가장 높은 것으로 나타났다. 본 균주는 배지 중에 탄소원과 질소원, 무기염으로 1.0%의 CMC와 0.5%의 peptone, 0.02%의 $CaC1_2$, $CoC1_2$를 사용하였을 경우 최대의 alkaline cellulase생산성을 나타내었다. 효소의 최적 활성 pH와 온도는 각각 10.5와 $50^{\circ}C$였다. 이 효소는 pH 6.0-13.0과 $50^{\circ}C$의 온도에서 매우 안정하였다. 효소액에 계면활성제를 첨가하여 효소 활성을 측정한 결과, 효소액은 sodium-$\alpha$-olefin sulfonate (AOS)와 sodium dodecyl sulfonate (SDS), Tween 20, Tween 80에 대하여 안정성 이 높은 특징을 보였으나 0.1%의 linear alkyl-benzene sulfonate (LAS)를 첨가한 경우에는 효소 활성이 심하게 저해되었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2613-2618
• /
• 2012

Hydrothermal route have been used in different conditions for preparation of $Ni(OH)_2$ nanostructures. The NiO nanoparticles were obtained by calcining the $Ni(OH)_2$ precursor at $450^{\circ}C$ for 2 h. The effect of sodium dodecyl sulfonate (SDS) as surfactant on the morphology and size of $Ni(OH)_2$ nanoparticles were discussed in detail. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize the products. The growth mechanism of the as-synthesized nanostructures was also discussed in detail based on the experimental results. Coming up, the NiO nanoparticle modified carbon paste electrode was applied to the determination of captopril in aqueous solution.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.543-546
• /
• 2007

Herein, a new electrochemical method was described for the determination of ciprofloxacin based on the enhancement effect of an anionic surfactant: sodium dodecyl benzene sulfonate (SDBS). In pH 4.0 phosphate buffer and in the presence of 1.0 × 10-4 mol/L SDBS, ciprofloxacin yields a well-defined and sensitive oxidation peak at the carbon paste electrode (CPE). Compared with that in the absence of SDBS, the oxidation peak current of ciprofloxacin remarkably increases in the presence of SDBS. The experimental parameters, such as supporting electrolyte, concentration of SDBS, and accumulation time, were optimized for ciprofloxacin determination. The oxidation peak current is proportional to the concentration of ciprofloxacin over the range from 8.0 × 10-8 to 5.0 × 10-6 mol L-1. The detection limit is 2.0 × 10-8 mol L-1 after 2 min of accumulation. This new voltammetric method was successfully used to detect ciprofloxacin in drugs.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.333-333
• /
• 2017

• 청정기술
• /
• 제7권4호
• /
• pp.291-297
• /
• 2001

본 연구는 중금속 추출 공정에 쓰이는 사차 암모늄 염인 Aliquat 336을 포함하는 콜로이드 액상 에이프런 (colloidal liquid aphrons, CLAs)을 지용성 계면활성제와 수용성 계면활성제를 사용하여 제조하였고 연속상에서 농축된 CLAs의 안정성을 표면으로 떠오르는 유기 용매의 양을 시간에 따라 측정하여 평가하였다. 다양한 조건에서 CLAs의 안정성을 비교하기 위해서 반감기가 도입되었다. 전해질의 첨가나 pH의 변화와 같은 연속상의 상태 변화는 CLAs의 파괴(break-up) 속도에 상당히 영향을 미치는데 이 파괴 속도가 급격히 변화하는 임계 응집 농도가 존재한다. pH의 변화에 따른 임계 응집 농도를 측정하였고 이온의 세기, 수용성 계면활성제 Sodium Dodecyl Sulfonate (SDBS)의 농도에 대한 CLAs의 안정성에 대한 영향을 고찰하였다.

• 미생물학회지
• /
• 제19권4호
• /
• pp.179-185
• /
• 1981

한강 수계에서 SDBS (Sodium Dodecyl Benzene Sulfonate)를 유일한 탄소원으로 가지는 최소배지에서 서란 120 균주중 $4^{\circ}C$에서 생장이 좋은 8균주를 선택하여 동정하였으며. 이들의 온도에 따른 생장파 분해능을 흡광도 분석기를 이용하여 측정하였다. 동정 결과. Ps. fluorescens가 4균주, Ps. putida가 2균주 이었다. 이들중 Ps. fluorescens LP6, Ps. lido Lei, Ps. fluorescens LS 6의 비생장율은 모두 $25^{\circ}C$에서 가장 높은 값을 나타냈으나 정체기에서의 균체량은 $5^{\circ}C$ 에서 가장 높았다. 따라서 이들 3 균주는 faculfative psychrophilic bacteria로 사료된다. 한편 SDBS의 분해는 세포가 정체기에 들어가면서 시작되었으며, 분해능은 $25^{\circ}C$C에서 가장 좋았다.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.204-208
• /
• 2012

A novel chemiluminescence (CL) flow injection method for the determination of balofloxacin is described. The method is based on the weak CL signal arising from the reaction of $KBrO_3$ with $Na_2S_2O_4$ in acidic medium being significantly enhanced by balofloxacin in the presence of europium (III) ion and sodium dodecyl benzene sulfonate (SDBS). The experimental conditions that affected CL intensity were carefully optimized and the CL reaction mechanism was briefly discussed. Under the optimum conditions, the relative CL intensity was proportional to the concentration of balofloxacin in the range of $7.0{\times}10^{-11}$ to $3.0{\times}10^{-7}g\;mL^{-1}$. The detection limit was $2.7{\times}10^{-11}g\;mL^{-1}$ and the relative standard deviation was 2.1% for $7.0{\times}10^{-10}g\;mL^{-1}$ balofloxacin (n = 13). The proposed method was successfully applied to the determination of balofloxacin in pharmaceutical formulations and biological fluids.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.229-234
• /
• 2016

Aiming to prepare high performance magnetorheological fluid, firstly, oleic acid and sodium dodecyl benzene sulfonate are chosen as surfactants. And then, the mechanical stirring process including stirring time, stirring temperature and stirring speed are optimized by measuring sedimentation ratio and zero-field viscosity. Finally, the properties of prepared magnetorheological fluid are elaborated. The results indicate that the compounding of oleic acid and sodium dodecyl benzene sulfonate can improve the properties of magnetorheological fluid distinctively, and the optimistic compounding content is 4g:4g or 5g:5g. The surfactants adding orders and the second stirring time have little effect on the properties of magnetorheological fluid, while obviously of the first stirring time, temperature and speed. Moreover, the sedimentation ratio of prepared magnetorheological fluid is less than 5.2% in two weeks, the zero-field viscosity is smaller than $0.6Pa{\cdot}s$ at $20^{\circ}C$, and the maximum yield stress is higher than 50 kPa.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1532-1534
• /
• 2008

Aquesous carbon nanotubes (CNTs) solutions were prepared using SDS (sodium dodecyl sulfonate) and NADDBS (sodium dodecylbenzene sulfonate). Our inks are found to have the viscosity of 1-2 cps. In addition, the surface tension of inks inversely decreased with increasing surfactant concentration and then saturated at critical micelle concentration (CMC). The low surface tension at CMC gave rise to lower contact angles on Indium layers, resulting in larger printable feature sizes. In the fabrication of cold cathode, jet-printing is feasible to modify and scale up the cathode structures. These feasibilities could contribute jet-printing method to be more adaptable for making large-area cold cathodes.