• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.161-166
• /
• 1982

Cyanide poisoning is expected to be antagonized by the administration of oxygen, when it is administered in combination with the conventional cyanide antidote, sodium thiosulfate. However, the antidotal efficacy and its exact mechanism of oxygen in cyanide poisoning is still a controversial one. To test the effect of oxygen on the antidotal action of thiosulfate in cyanide poisoning, author designed this study on the dose-mortality patterns for potassium cyanide in mice. Potency ratios derived from $LD_{50}$ values were compared in groups of mice treated with sodium thiosulfate alone and sodium thiosulfate with oxygen. These results indicated that oxygen enhances the antidotal effect of sodium thiosulfate, effectively. This fact demonstrates that oxygen is of importance in the treatment of cyanide poisoning.

• YAKHAK HOEJI
• /
• v.50 no.3
• /
• pp.208-213
• /
• 2006

Rat aortic ring preparations were mounted in organ baths, exposed to sodium cyanide $(0.01{\sim}1.0\;mM)$ for 10 min, and then subjected to contractile agents or relaxants such as acetylcholine, sodium nitroprusside and isoproterenol. Presence of low concentration of sodium cyanide did not affect the contractile response to KCl or phenylephrine in the aortic rings with intact endothelium or endothelium denuded. Sodium nitroprusside but not acetylcholine or isoproterenol augmented phenylephrine-induced intact or denuded vascular contraction in the presence of low concentration of sodium cyanide. In conclusion, this study provides the evidence concerning the potentiating effect of sodium nitroprusside on the contraction induced by phenylephrine in rat aortic rings regardless of endothelial function.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.88-95
• /
• 2019

This study was conducted to establish the analytical method for the determination of cyanide in blood, urine, lung and skin tissues in rats. In order to detect or quantify the sodium cyanide in above biological matrixes, it was derivatized to Pentafluorobenzyl cyanide (PFB-CN) using pentafluorobenzyl bromide (PFB-Br) and then reaction substance was analyzed using gas chromatography mass spectrometer (GC/MS)-SIM (selected ion monitoring) mode. The analytical method for cyanide determination was validated with respect to parameters such as selectivity, system suitability, linearity, accuracy and precision. No interference peak was observed for the determination of cyanide in blank samples, zero samples and lower limit of quantification (LLOQ) samples. The lowest limit detection (LOD) for cyanide was $10{\mu}M$. The linear dynamic range was from 10 to $200{\mu}M$ for cyanide with correlation coefficients higher than 0.99. For quality control samples at four different concentrations including LLOQ that were analyzed in quintuplicate, on six separate occasions, the accuracy and precision range from -14.1 % to 14.5% and 2.7 % to 18.3 %, respectively. The GC/MS-based method of analysis established in this study could be applied to the toxicokinetic study of cyanide on biological matrix substrates such as blood, urine, lung and skin tissues.

• Journal of Surface Science and Engineering
• /
• v.55 no.6
• /
• pp.460-468
• /
• 2022

Due to its high electrical conductivity, low contact resistance, good weldability and high corrosion resi-stance, gold is widely used in electronic components such as connectors and printed circuit boards (PCB). Gold ion salts currently used in gold plating are largely cyan-based salts and non-cyanic salts. The cya-nide bath can be used for both high and low hardness, but the non-cyanide bath can be used for low hardness plating. Potassium gold cyanide (KAu(CN)₂) as a cyanide type and sodium gold sulfite (Na₃[Au(SO)₃]₂) salt as a non-cyanide type are most widely used. Although the cyan bath has excellent performance in plating, potassium gold cyanide (KAu(CN)₂) used in the cyan bath is classified as a poison and a toxic substance and has strong toxicity, which tends to damage the positive photoresist film and make it difficult to form a straight side-wall. There is a need to supplement this. Therefore, it is intended to supplement this with an eco-friendly process using sodium sulfite sodium salt that does not contain cyan. Therefore, the main goal is to form a gold plating layer with a controllable hardness using a non-cyanide gold plating solution. In this study, the composition of a non-cyanide gold plating solution that maintains hardness even after annealing is generated through gold-palladium alloying by adding thallium, a crystal regulator among electrolysis factors affecting the structure and hardness, and changes in plating layer structure and crystallinity before and after annealing the correlation with the hardness.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.2
• /
• pp.29-37
• /
• 1989

Using the quarternary ammonium salts as phase transfer catalyst, the nucleophilic substitution reaction of 1-chlorooctane with sodium-cyanide was investigate kinetically with respect to the formation of octanenitrile. The product was analyzed with gas chromatograph, and quantity of octanenitrile was measured. The reaction condition was considered by the effect of the reaction temperature, of the species and the amount of catalyst, of the speed of strirring, and of the concentration of reactants. The reaction was carried out in the first order on the concentration of 1-chlorooctane and sodium cyanide, respectively. The over-all order was 2nd. The activation energies for the nucleophilic substitution reaction of 1-chlorooctane and 1-bromooctane under tetrabutylammonium hydrogen-sulfate were calculated as 2.05 and 10.08kcal/mol, respectively. The effect of various caltalysts was decreased in the order of tetrabutylammonium bromide, terabutylammonium, tetrabutylammonium hydrogensulfate, and tetrabutylammonium iodide. The reaction rate was dependent on the concentration of sodium-cyanide dissolved in the aqueous phase, and the good result was shown when the mol ratio between 1-chlorooctane and sodium cyanide was one per three.

• Clinical and Experimental Pediatrics
• /
• v.53 no.8
• /
• pp.805-808
• /
• 2010

Although sodium nitroprusside (SNP) is often used in pediatric intensive care units, cyanide toxicity can occur after SNP treatment. To treat SNP-induced cyanide poisoning, antidotes such as amyl nitrite, sodium nitrite, sodium thiosulfate, and hydroxycobalamin should be administered immediately after diagnosis. Here, we report the first case of a very young infant whose SNP-induced cyanide poisoning was successfully treated by exchange transfusion. The success of this alternative method may be related to the fact that exchange transfusion not only removes the cyanide from the blood but also activates detoxification systems by supplying sulfur-rich plasma. Moreover, exchange transfusion replaces cyanide-contaminated erythrocytes with fresh erythrocytes, thereby improving the blood's oxygen carrying capacity more rapidly than antidote therapy. Therefore, we believe that exchange transfusion might be an effective therapeutic modality for critical cases of cyanide poisoning.

• Ocean Science Journal
• /
• v.43 no.2
• /
• pp.107-113
• /
• 2008

Laboratory bioassays were conducted to test the acute toxicity effects of sudden exposure to sodium cyanide (NaCN) on the endogenous rhythm of the oxygen consumption rate (OCR) in the black rockfish Sebastes schlegeli. The OCR of the black rockfish(n = 14, total length = $20.4{\pm}1.16\;cm$, wet weight = $158{\pm}25\;g$) was measured with an automatic intermittent-flow-respirometer. OCR decreased significantly when experimental fish were exposed to NaCN. When exposed to 10 ppb NaCN, fish were able to recover their OCR rhythmic activities. When fish were exposed to 20 ppb, however, the metabolic activity rhythms were not recovered. These results suggest that exposure to NaCN concentrations over 20 ppb cause severe physiological damage to the endogenous rhythms of black rockfish.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.143-146
• /
• 1996

A continuous potential pulse is applied to a silver-working electrode on a pulsed amperometric detector (PAD) for detection of free cyanide and sulfide. The moving phase is 0.1 M sodium hydroxide, 0.5 M sodium acetate and 5% (v/v) ethylenediamine mixture, and the flow rate is 0.7 mL/min. Optimized pulse conditions include a -200 mV (vs. Ag/AgCl reference electrode) detection potential(Ed) for 60 msec and 50 mV cleaning potential (Ec) for 120 msec. The silver working electrode surface is not poisoned by cyanide or sulfide, and the PAD maintains long-term stability without loss of sensitivity and reproducibility at these pulse conditions. The detection limit of cyanide and sulfide separated by ion chromatography using an anion exchange column is 0.1 ppm and 0.05 ppm, respectively.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.222-226
• /
• 2011

Salmonellosis is a major bacterial zoonosis that causes self-limited enteritis to fatal infection in animals and food-borne infection and typhoid fever in humans. Multidrug-resistant strains of Salmonella spp. has increased over the last several decades and recently causes more serious problems in public health. The present study was investigated bacteriocidal effects of sodium chlorate, sodium azide, sodium cyanide, and sodium salts mixture containing sodium chlorate, sodium azide, and sodium cyanide on infection with S. typhimurium in macrophage RAW 264.7 cells, and antibacterial effects of sodium salts mixture for murine salmonellosis. In infection assay of S. typhimurium in RAW 264.7 cells, bacterial survival rates within macrophage in all treated groups was significantly reduced comparing to that of the control group with the passage of incubation time. Administration of sodium salts mixture showed a therapeutic effect for S. typhimurium infected ICR mice. The mortality of mice treated with sodium salts mixture was 70% until 12 days, while that of control mice was 100% until 9 days after S. typhimurium infection. The results of this study strongly indicate that sodium salts mixture has a potency treatment for murine salmonellosis.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.337-341
• /
• 2001

A new method to extract gold from pyrite roster cinder, which combines ultra-fine-grinding with resin-in-pulp, has been studied in this paper. Compared with traditional leaching technology, it can short leaching time, avoid complex filter process, lower sodium cyanide consumption and increase gold recovery by 35%. During leaching, aluminium oxide ball was used as stirred medium, hydrogen peroxide as leaching aid and sodium hexametaphosphate as grinding aid. With the high efficiency and chemistry effect of ultra-fine-grinding, the leaching process was developed and the gold leaching rate may reach 88%. With AM-2 Б resin as abosorber and sulfocarbamide (TU) as eluent, gold was recovered from cyanide pulp by resin-in-pulp. AM-2 Б resin has good adsorbability in cyanide solution(pH=10). It was easy to elude gold from the loaded resin with 0.1㏖/L cholhydric acid and 1㏖/L sulfocabamide. The effect of contact time, temperature and acidity etc. on the gold absorption had been examined with static methods. The results showed that the adsorption and desorption of gold could both reach over 98%. The effects of flow rate of solution on dynamic adsorption and elution of gold had been examined with dynamic methods. Breakthrough curve and elution curve had been drawn in this paper. A mild condition was determined through a number of experiments: leaching time 2 hours, liquid solid ratio 4:1, sodium cyanide 3kg/t, hydrogen peroxide 0.05%, sodium hexametaphosphate 0.05%; adsorption time 30 minutes, temperature 10-3$0^{\circ}C$, resin($m\ell$) solid(g) ratio 1:10, eluent resin ratio 10-20:1, velocity of eluent $1.5m\ell$/min. Under the mild condition, the gold recovery may reach 85%.