• The International Journal of Costume Culture
• /
• v.4 no.2
• /
• pp.86-93
• /
• 2001

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. in searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The result indicated that sodium sulfate could be produced the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. Re recovered sodium sulfate samples, with purifies ranging from 67% to 99.91, were compard with commercially available sodium sulfate in directive dyeing of cotton fabrics. Direct Yellow 27 and direct Blue 1 had similar exhaustions among Na₂So₄Ⅰ, Na₂So₄Ⅱ, Na₂So₄Ⅲ and V which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂So₄Ⅳ had high exhaustion despite low ratios of sodium sulfate and sodium chloride. In direct Red 80, exhaustion depends more on the ratios of sodium sulfate and sodium chloride than sodium chloride. Na₂SO₄Ⅳ and Na₂SO₄V with high ratios of sodium chloride had more exhaustion than Na₂So₄and Na₂So₄Ⅲ with low ratios of sodium chloride. Generally, directive dyeing using recovered salts from farm drainage has similar or more excellent exhaustion than directive dyeing using commercial sodium sulfate.

• Food Science and Industry
• /
• v.49 no.2
• /
• pp.18-24
• /
• 2016

Sodium chloride (NaCl) is a very important as one of major food ingredients in food industries. Recently, as the potential risk of adult diseases such as hypertension by overingestion of sodium, health authorities of many countries are executing policies for the reduction of sodium to suppress the overingestion of sodium by intake of NaCl. As general ways, the replacement of NaCl with either alternative salts, such as solar salts and minerals, for examples calcium, magnesium, potassium, lactic acid, and so on, and the addition of flavor enhancers were used to reduce the contents of sodium in foods. Recently, controls of particle size of sodium chloride or release point are emerging as new salt-manufacturing technologies for the sodium reduction. Upon reducing NaCl in foods it is important to develop practically adaptable technologies on the basis of the consideration of the unique functions of NaCl in foods, in particular effects on rheological characters, function as a humectant, shorten shelf life time, and so on.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.233-241
• /
• 2021

A series of three bench-scale experiments was performed to investigate the conversion of sodium metal to sodium chloride via reactions with non-metal and metal chlorides. Specifically, batches of molten sodium metal were separately contacted with ammonium chloride and ferrous chloride to form sodium chloride in both cases along with iron in the latter case. Additional ferrous chloride was added to two of the three batches to form low melting point consolidated mixtures of sodium chloride and ferrous chloride, whereas consolidation of a sodium-chloride product was performed in a separate batch. Samples of the products were characterized via X-ray diffraction to identify attendant compounds. The reaction of sodium metal with metered ammonium chloride particulate feeds proceeded without reaction excursions and produced pure colorless sodium chloride. The reaction of sodium metal with ferrous chloride yielded occasional reaction excursions as evidenced by temperature spikes and fuming ferrous chloride, producing a dark salt-metal mixture. This investigation into a method for controlled conversion of sodium metal to sodium chloride is particularly applicable to sodium containing elevated levels of radioactivity-including bond sodium from nuclear fuels-in remote-handled inert-atmosphere environments.

• CELLMED
• /
• v.3 no.2
• /
• pp.16.1-16.5
• /
• 2013

Hypertension induces many of the social costs related by cardiovascular diseases. Sodium is known as a crucial factor in inducing type I hypertension. In traditional Korean medicine, bamboo salt (BS) has been used in the attenuation of salts toxic coldness and nowadays it has shown various therapeutic effects. It contains mostly sodium chloride (about 91.7% of BS); however, the effect of BS on hypertension is still not completely understood. Thus, we investigated the effect of BS on blood pressure for the first time. Two group of BS, sun-dried salt (SDS), NaCl, or distilled water (DW, vehicle control) was administrated orally for 8 weeks. Although BS had no effect on body weight and food intake, it increased water intake (p < 0.05). The BS groups, in terms of blood pressure, was similar to the DW group; whereas the SDS and NaCl groups showed significantly increased blood pressure levels (p < 0.05). BS also decreased sodium-chloride cotransporter (NCC) mRNA expression, unlike SDS or NaCl. These observations indicate that BS may be a promising strategy for the prevention of various diseases including salt-related diseases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.509-512
• /
• 2004

This research is targeting that estimate the effect on cement concrete pavement with type of chloride deicers. In order to this study objective, when chloride deicers were spread on road surface, thermal characteristics test was conducted. Also, skid resistance test according to types and concentration of chloride deicier, road surface conditions were investigated. As a test results, thermal characteristics with kind of chloride deicier could know that sodium chloride(NaCl) is exothermic reactive material, calcium chloride$(CaCl_2)$ is endothermic reactive material. And, in case of mixed salt of the calcium and sodium chloride, it could know that can change to the exothermic or endothermic reaction according to dosage ratios. Skid value by British Pendulum Tester(BPT) has shown that it is seldom difference between the types($CaCl_2$, NaCl, mixed salt) and solution concentrations(0.5, 0.8, 1.0, 4.0, $10\%$) of chloride deicier comparing with tap water except mixed salt($10\%$ solution concentration).

• The Research Journal of the Costume Culture
• /
• v.11 no.3
• /
• pp.416-422
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes with nylon/wool fabrics. In nylon/wool fabrics, C.I. Acid Yellow 23 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na₂SO₄ III and Na₂SO₄ Ⅴ which had similar ratios of sodium sulfate and sodium chloride in recovered salts. Na₂SO₄ Ⅳ had low exhaustion which had low ratios of sodium sulfate and sodium chloride. In nylon/wool fabrics, C.I. Acid Blue 158 had similar exhaustions among Na₂SO₄ I, Na₂SO₄ II, Na2₂SO₄ III, Na₂SO₄ IV and Na₂SO₄ Ⅴ despite of Na₂SO₄ Ⅳ had low ratios of sodium sulfate and sodium chloride Generally, the dyeing of levelling dyes using recovered salts from farm drainage has similar or low exhaustion than the dyeing of levelling dyes using commercial sodium sulfate.

• Mycobiology
• /
• v.35 no.3
• /
• pp.124-128
• /
• 2007

Ganoderma resinaceum tolerated sodium chloride salt stress within a range of 0 mM till 300 mM. It responded to salt stress with fluctuation in proline formation at different NaCl concentrations. However, the mycelial dry weight, total protein contents and exopolysaccharides did not changed considerably. Increasing sodium chloride concentration led to morphological alteration in fungal mycelia with disappearance of fungal cell wall, plasmolysis, and vacuolation as indicated with electron microscopic examination of the fungal growth.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.114-120
• /
• 1994

Esterolysis reactions of PNPDPP (p-nitrophenyldiphenylphosphate) by DCI ( dichloroisocyanuric acid sodium salt) in borate buffer pH8.0 micellar phase were studied. The rate of hydrolysis reaction was rapidly increased by adding cationic surfactants, CTAC (cetyltrimethylammonium chloride) or CTAB (cetyltrimethylammonium bromide), to the DCI solution. Especially in CTAB micellar system, the N-Cl bond of DCI was transformed to the N-Br bond during the reaction.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.102-113
• /
• 2019

In this study, the effect of sodium chloride (salt) concentration and phosphate on the quality properties of samgyetang was investigated. Increasing the salt concentration by 0.5% increased the moisture and ash content, salinity, water holding capacity (WHC), and thiobarbituric acid reactive substances (TBARS), whereas the protein content, pH, cooking losses, and shear forces were decreased. Addition of phosphate to the brine increased the pH and WHC, but decreased the TBARS, cooking losses, and shear forces. In a sensory evaluation, the scores for flavor and overall acceptability were the highest when the salt concentration of the brine was 2.0%. Overall, this study shows that the salt concentration and addition of phosphate to the brine of samgyetang substantially influences the overall quality of the chicken breast. Based on quality measurements and sensory scores, a 2.0% salt concentration with the addition of phosphate appear to be the most suitable conditions for the manufacturing of marinated samgyetang.

• Journal of Nutrition and Health
• /
• v.29 no.10
• /
• pp.1096-1104
• /
• 1996

This study was performed to evaluate the effect of sodium cholride supplementation on bone metabolism in female rats consuming a low calcium diet. Twenty five female rats were divided into three dietary groups (control Na : 0.1038%, 1% Na : 1.036%, 2% Na : 2.072%). All experimental diets contained 0.27% Ca and were fed to rats with deionized water for 7 weeks. Bone mineral density(BMD) and bone mineral content(BMC) of total body, spine and femur were measured using energy x-ray absorptiometry(DEXA) by small animal software. Then Ca efficiency was calculated from BMD and BMC. Serum Ca, P, Na and urine Ca, P, Na were determined. Urinary pyridinoline, serum ALP were measured to monitor bone resorption. Following 7 weeks, sodium cholride supplemented groups had higher urinary Ca excreteion, urinary pyridinoline, crosslinks value and serum ALP. There was no significant difference in case of serum Ca among all groups. Sodium chloride supplemnted groups had lower Ca effciency of total, spine and femur BMD and BMC than that of control group. In conclusion high salt intake not only increases urinary Ca excretion as urinary Na excretion does but also increase bone resorption and decrease Ca efficiency of each bone. It is been suggested that high salt intake may be harmful for bone maintenance. Therfore, the decrease of salt intake to the level of recommendation would be desirable.