• Korean Journal of Forensic Psychology
• /
• v.13 no.2
• /
• pp.147-167
• /
• 2022

This study was conducted to find out the difference in judgment of murder cases by participants' generation according to the type of murder. 196 adults in their 20s and older were randomly assigned to one of the scenarios of parricide, filicide, and murder, then responded to the judgment(ex. judgment of the perpetrator, degree of deviation from social norms, and judgment of victim responsibility). Finally, 128 responses were used in the analysis. As a result, it was found that the main effect of the murder type and the interaction effect of the generation and the murder type were not shown in all dependent variables. However, the difference between generations was statistically significant in the judgment of the perpetrator (e.g., perpetrator blame, perpetrator responsibility, intentional crime, etc.), indicating that millennials made unfavorable judgments to the perpetrator. Especially, in the case of parricide, it was found that millennials made unfavorable judgments to perpetrators than older generations. Also, it was found that the participants of the older generation tended to make unfavorable judgments toward the perpetrator of murder rather than the perpetrator of parricide. Finally, based on these results, this study proposed the need to reconsider the 'victim of survivors' factor, which is considered as a weighing of an offense for special sentencing factors.

• Journal of Life Science
• /
• v.32 no.12
• /
• pp.989-996
• /
• 2022

Some flowers have high sensual appealability due to their unique shapes, colors, smells, and tastes. Such edible flowers receive social attention as a noble ingredient of functional teas. In this study, methanol extracts of 23 commercial flower teas (CFTs) were prepared, and their color differences were compared. No tar color pigments were detected in the 23 CFT. The average content of total polyphenol of the 23 CFTs was 80.2±50.92 mg/g and the extracts of jin-dal-rae (Rhododendron mucronulatum Turcz), mae-hwa (Prunus mume), mae-mil (Fagopyrum esculentum), mok-ryun (Magnolia kobus), and sal-gu (Prunus armeniaca var. ansu Maxim) flowers showed total polyphenol contents greater than 150 mg/g. The average content of total sugar of the 23 CFTs was 187.4±166.5 mg/g and the extracts of chamomile (Chamaemelum nobile), kuk-hwa (Chrysanthemum morifolium), dong-baek (Camellia japonica L.), and won-chu-ri (Hemerocallis fulva) flowers showed total sugar contents greater than 400 mg/g. Among the 23 CFTs, the extract of jang-mi (Rosa hybrida hortorum) flower has prominent anti-thrombosis activity, and the extracts of dal-ma-ji (Oenothera lamarckiana), dong-baek, hibiscus (Hibiscus syriacus), and mae-mil flowers showed strong inhibitions against thrombin and blood coagulation factors. Also, the extracts of jang-mi, kum-jan-hwa (Tagetes erecta L.), mae-mil, mok-ryun dong-baek, and jin-dal-rae flower showed strong radical scavenging activities against DPPH, ABTS, and nitrite and reducing power. Our results suggest that the flowers of jang-mi, mae-mil, and dong-baek can be developed as promising anti-thrombosis treatments.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.120-128
• /
• 2022

Printed circuit boards (PCBs) are a basic component in the electronics industry and are widely used in nearly all electronic products, such as mobile phones, tablet computers, and digital cameras, as well as in electric equipment. PCB manufacturing involves the use of many chemicals and chemical processes and therefore has more risks than other manufacturing sectors. This study aims to identify the causes of possible accidents during PCB manufacturing through risk assessment, develop and implement safety measures, and evaluate the effectiveness of these measures. Note that the safety measures developed to mitigate the risks of a certain process were also implemented for other similar processes. The risk assessments conducted over seven years, from 2015 to 2021, at a PCB manufacturing company identified 361 hazardous processes. Between 2016 and 2019, 41-56 hazardous processes were identified per year; such processes decreased to fewer than 20 per year after 2020. Application of the risk assessment results to the improvement of the hazardous processes with the similar characteristics seems to be effective in decreasing the risks. Equipment-related factors such as lack of appropriate maintenance, low work standards, and defective protection devices were responsible for 59.8% of all possible accidents. Because PCB manufacturing involves many chemicals, skin contact with hazardous substances, electric shock, fire, and explosion were the most common types of possible accidents (81.7%). In total, 505 safety measures were implemented, including 157 related to purchase and improvement of equipment and devices for safety (31.1%), 147 related to the installation/modification of fire prevention facilities (29.1%), and 69 related to the use of standard electrical appliances (13.7%). Risk assessment conducted after implementing the safety measures showed that these measures significantly decreased risk; 247 processes (68.4%) had a risk level of 3, corresponding to "very low," and 114 processes (31.6%) showed a risk level of 4, corresponding to "low." In particular, risk assessment of 104 processes with risk scores of 12 and 10 other processes with risk score of 16 showed that the risk decreased to 4 after implementing the safety measures. Thus, implementing these measures in similar manufacturing sectors that involve chemical processes can mitigate risk.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.67-74
• /
• 2021

The purpose of this study is to explore the internal foundation of lifelong education for the disabled. The composition system of the meaning of contents for this purpose is divided into three elements: 'of' which means subject based on lifelong education for the disabled, 'for' which means purpose, and 'from' which means practical main base. The research method was to discuss the academic basis, practical application model and plan, or to analyze the literature through the previous studies that were actualized in order to form the internal foundation of the support system for lifelong education for the disabled. Second, the expert meeting was conducted to improve the specificity of the research contents based on the basis of the literature analysis. The contents of this study are presented in two main ways: the foundation of developmental disabilities and the foundation of schools by synthesizing the main bases of subjects, purposes, and practical base required to form the internal foundation of lifelong education for the disabled. The above two factors first establish the internal universality of the support system for lifelong education for the disabled, and in connection with the types of sensory disabilities and the general lifelong education. As a result, the long-term stability of the overall support system for lifelong education for the disabled was analyzed.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.95-117
• /
• 2022

This study was conducted as basic research for establishing a mid to long term development plan for libraries in Uiseong-gun, designated as a depopulated area. First, the social, cultural, and environmental characteristics of Uiseong-gun were analyzed and compared with the library infrastructure of depopulation areas similar in size with Uiseong-gun. In addition, a survey was conducted on the perception of users to understand the usage status of libraries, satisfaction with services and improvement plans, non-use factors, and demands for new libraries. Based on this process, the direction of Uiseong-gun library policy was presented. Specifically, four strategic directions for the development of libraries (future orientation, community revitalization, service specialization of the information poor, enhancement of local humanities and spiritual culture) and five key service tasks (building library brand, implementing innovative spaces and services, expanding library functions for improvement of settlement conditions of residents, developing and providing services for the elderly reflecting local characteristics, promoting reading culture) were derived. The proposed core tasks focused on future-oriented library services to overcome the limitations of a population decrease area and develop the potential of Uiseong-gun.

• Journal of Service Research and Studies
• /
• v.10 no.4
• /
• pp.89-100
• /
• 2020

The smart factory is an important axis of the 4th industrial revolution. Smart factory is a system that induces the maximum efficiency and effectiveness of production using the IoT and intelligent sensing systems. The product lifecycle management technique is a method that can actively reflect the consumer's requirements in the smart factory and manage the entire process from the consumer to the post management. There have been many studies on product lifecycle management, but studies on how to organize product lifecycle management knowledge domains in preparation for the era of the 4th industrial revolution were insufficient. This study analyzed the opinions of a group of experts preparing for the 4th industrial revolution in terms of product lifecycle management. The impact of the 4th industrial revolution on the detailed knowledge areas of product lifecycle management was investigated. The changes in product lifecycle management were summarized using a qualitative data analysis technique for a group of experts. Based on the opinions of experts, the product lifecycle management, which consists of a total of 30 detailed knowledge areas, was prepared to supplement or prepare for the 4th industrial revolution. This study investigates changes in product lifecycle management in preparation for the 4th industrial revolution in the knowledge domain of the existing defined product life cycle management. In future research, it is necessary to redefine the knowledge domain of product life cycle management suitable for the era of the 4th industrial revolution and investigate the perception of experts. Considering the social culture and technological change factors of the 4th industrial revolution, the scope and scope of product life cycle management can be newly defined.

• Journal of Industrial Convergence
• /
• v.20 no.11
• /
• pp.85-93
• /
• 2022

As of the end of 2019, the total population nationwide was 51,849,861, and over the past five years, the population per household has decreased by 1.52% annually from 2.45 in 2015 to 2.31 in 2019. Looking at the current status of population distribution by age group, Busan metropolitan city had the highest proportion of senior citizens aged 65 or older at 18.2%, and Sejong Special Self-Governing city had the lowest at 9.4%. In particular, as of 2019, the population of the mobility handicapped was 15,219,000 nationwide, showing a ratio of about 29.4% of the total population. Therefore, it is important to secure the right to move according to the mobile facilities so that the mobility handicapped can move safely and conveniently. Against this background, this study places value on transportation welfare facilities centered on the mobility handicapped for safe and convenient movement, and in particular, in proposing measures to cope with the entry of an aging society and the continuous increase of the mobility handicapped, the transportation facilities, The purpose of this study is to analyze the impact of welfare facilities on the mobility handicapped and suggest implications. As a research method, the results of statistical analysis methods were presented through major preceding studies and expert surveys.

• Biomolecules & Therapeutics
• /
• v.31 no.2
• /
• pp.227-239
• /
• 2023

Major depressive disorder is a leading cause of disability in more than 280 million people worldwide. Monoamine-based antidepressants are currently used to treat depression, but delays in treatment effects and lack of responses are major reasons for the need to develop faster and more efficient antidepressants. Studies show that ketamine (KET), a PCP analog, produces antidepressant effects within a few hours of administration that lasts up to a week. However, the use of KET has raised concerns about side effects, as well as the risk of abuse. 4 -F-PCP analog is a novel PCP analog that is also an NMDA receptor antagonist, structurally similar to KET, and might potentially elicit similar antidepressant effects, however, there has been no study on this subject yet. Herein, we investigate whether 4-F-PCP displays antidepressant effects and explored their potential therapeutic mechanisms. 4-F-PCP at 3 and 10 mg/kg doses showed antidepressant-like effects and repeated treatments maintained its effects. Furthermore, treatment with 4-F-PCP rescued the decreased expression of proteins most likely involved in depression and synaptic plasticity. Changes in the excitatory amino acid transporters (EAAT2, EAAT3, EAAT4) were also seen following drug treatment. Lastly, we assessed the possible side effects of 4-F-PCP after long-term treatment (up to 21 days). Results show that 4-F-PCP at 3 mg/kg dose did not alter the cognitive function of mice. Overall, current findings provide significant implications for future research not only with PCP analogs but also on the next generation of different types of antidepressants.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.246-255
• /
• 2023

Public conflicts in the port sector can cause additional social costs and delay the supply of port infrastructure, which can negatively affect local industries and national competitiveness. Although the importance of conflict management in the port sector is gradually increasing, there is still no systematic conflict management countermeasure. Therefore, in this study, the limitations of the current conflict management system in the port sector were considered, and a Delphi survey was conducted targeting experts and stakeholders in the port sector and conflict management. In addition, criteria for diagnosing conflicts in the port sector, causes of conflicts, proactive management measures, and ex post solutions were derived. The results of the Delphi survey analysis showed that the biggest causes of conflict were the absence of stakeholder opinion collection, consultation, and communication tools. Preliminary conflict management measures including a public deliberation process to collect local opinions and discuss development directions before deciding on specific issues, and ex post conflict resolution measures including investigation of causes of conflicts and objective personnel management in the process of preparing alternatives (e.g., securing reliability) were determined as the most important factors. In addition, based on the results obtained in this study, conflict management techniques for each phase of the port development project were presented. These findings are expected to be used as a useful reference material to reflect the port sector, which has not been included in the "Public Institution Conflict Management Manual (2016)" of the Office for Government Policy Coordination.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.7
• /
• pp.549-556
• /
• 2019

The purpose of this study is to explore the factors affecting the satisfaction level of the disabled and their families. As a major variable, the mediating effect of the change of the disabled was examined in the relationship between residential facilities satisfaction and family life satisfaction. A total of 810 responses were collected by conducting a questionnaire survey on 856 persons with disabilities and their parents. As a result, the facilities satisfaction for the disabled has a significant influence on the family life satisfaction and the change of the handicapped. In the relationship between facility satisfaction and family life satisfaction, the change of disabled showed partial mediating effect, and it was confirmed that the effect of facility satisfaction on family life satisfaction increased when there was a change in the disabled. The results of this study can be used as the basic data to structure the discussion of living facilities for people with disabilities and their families, as well as can be used to restructure policies and practices for residential support services for the disabled. In particular, it is meaningful as a basic data for proposing various future types of residential facilities required by parents of adults with disabilities.