• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.104-107
• /
• 2018

최근 촬영 기기의 기술발전으로 인해 디지털 영상의 해상도가 증가함에 따라 선명한 디지털 영상에 대한 요구가 증가하고 있다. 이러한 요구에도 불구하고 디지털 영상 내 가우시안 잡음 (gaussian noise)은 촬영기기를 통해 영상 획득 및 처리 과정에서 발생하여 화질을 열화 시킨다. 디지털 이미지에서 발생하는 가우시안 잡음을 제거하기 위해서 기존의 저대역 통과 필터 (low-pass filter: LPF)를 사용하면 잡음은 제거되지만, 블러링 현상 (blurring phenomenon)이 나타난다. 이러한 문제점을 개선하기 위해 소벨 연산자 (sobel operator)를 사용하여 영상 내 에지 맵 (edge-map)을 생성하여 에지 영역과 동질 영역을 구분한다. 에지영역에서는 약한 저역 필터 (weak low-pass filter)를 사용하고, 그 외의 이미지 영역에서는 강한 저역 필터 (strong low-pass filter)를 사용하는 알고리듬을 제안하였다. 그리고 다양한 이미지에 대하여 기존 알고리듬과 제안한 알고리듬의 적용한 결과를 통해 주관적 화질 비교하였고 객관적 지표로 최대 신호 대 잡음비 (peak signal-to noise ratio: PSNR)와 구조 유사성 (structural similarity: SSIM)을 사용하여 성능을 평가하였다. 실험결과를 통해 제안된 알고리듬이 잡음 제거 및 외곽선 보존의 우수함을 확인하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2004

The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.20-28
• /
• 2000

The error diffusion algorithm is good for reproducing continuous image to binary image. However the reproduction of edge characteristic is weak in power spectrum analysts of display error. In this paper, an error diffusion method which include pre-filter algorithm for edge characteristic enhancement is proposed Pre-filter algorithm is organized horizontal and vertical directional differential value and weighting function of pre-filter First, it is obtained the horizontal and vertical differential value from the peripheral pixels in original image using $3{\times}3$ Sobel operator Secondly weighting function of pre-filter is composed by function including absolute value and sign of differential value The improved Error diffusion algorithm using pre-filter, present a good result visually which edge characteristic is enhanced. The difference between orignal image and halftoning image is compared with edge-enhanced error diffusion algorithm by measuring the radially averaged power spectrum density.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.115-125
• /
• 2019

In this paper, the image is received from the camera and the lane is sensed. There are various ways to detect lanes. Generally, the method of detecting edges uses a lot of the Sobel edge detection and the Canny edge detection. The minimum use of multiplication and division is used when designing for the hardware configuration. The images are tested using a black box image mounted on the vehicle. Because the top of the image of the used the black box is mostly background, the calculation process is excluded. Also, to speed up, YCbCr is calculated from the image and only the data for the desired color, white and yellow lane, is obtained to detect the lane. The median filter is used to remove noise from images. Intermediate filters excel at noise rejection, but they generally take a long time to compare all values. In this paper, by using addition, the time can be shortened by obtaining and using the result value of the median filter. In case of the Sobel edge detection, the speed is faster and noise sensitive compared to the Canny edge detection. These shortcomings are constructed using complementary algorithms. It also organizes and processes data into parallel processing pipelines. To reduce the size of memory, the system does not use memory to store all data at each step, but stores it using four line buffers. Three line buffers perform mask operations, and one line buffer stores new data at the same time as the operation. Through this work, memory can use six times faster the processing speed and about 33% greater quantity than other methods presented in this paper. The target operating frequency is designed so that the system operates at 50MHz. It is possible to use 2157fps for the images of 640by360 size based on the target operating frequency, 540fps for the HD images and 240fps for the Full HD images, which can be used for most images with 30fps as well as 60fps for the images with 60fps. The maximum operating frequency can be used for larger amounts of the frame processing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.533-535
• /
• 2018

As the use frequency of electronic communication equipment increases due to the influence of the 4th industrial revolution, the importance of image and signal processing is increasing. However, due to noise caused by various causes, the reliability of the equipment is degraded and malfunctions are caused. In this paper, we propose an algorithm to remove AWGN in most environments. The existing methods show relatively poor performance due to the smoothing phenomenon at the boundary of the image. To overcome this problem, we proposed a filter algorithm that adapts to the boundary region using the Sobel edge detection to remove the noise. And using the PSNR compared with traditional methods, such as to demonstrate the performance of the proposed algorithm.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.4
• /
• pp.313-318
• /
• 2016

Communication, Ocean And Meteorological Satellite (COMS) Meteorological Imager (MI) images are processed for radiometric and geometric correction from raw image data. When intermediate image data are matched and compared with reference landmark images in the geometrical correction process, various techniques for edge detection can be applied. It is essential to have a precise and correct edged image in this process, since its matching with the reference is directly related to the accuracy of the ground station output images. An edge detection method based on neural networks is applied for the ground processing of MI images for obtaining sharp edges in the correct positions. The simulation results are analyzed and characterized by comparing them with the results of conventional methods, such as Sobel and Canny filters.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.2
• /
• pp.96-102
• /
• 2011

In this study, we performed algorithm development of automatic symptom degree for patient with hallux valgus one of the representative foot disease of morden. And this study proposes an efficient automated technique that is different from the original analog diagnosis for treatment and surgery of hallux valgus using digital image process. And we used X-Ray images of both a normal and a patient with hallux valgus in the procedure. First, we marked the standard angle on the X-Ray image of normal through Overlap & Add technique. Then we created a standard image through thinning filter and roberts filter(edge detection algorithm). Second, we used sobel filter of edge detection algorithm on the X-Ray image of patient. Moreover, we went another overlap & add technique procedure with both normal and patient image that we made. With the output, we projected the display detection image onto the screen. Finally, with the display detection image, we could measure and project the diagnosis angle of hallux valgus. And this confirms that this method is much more practical and applicable for another orthopedics disease than the prior one.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.836-841
• /
• 2016

An indoor positioning system using Wi-Fi is essential to produce a radio map that combines the indoor space of two or more dimensions, the information of node positions, and etc. in processing for constructing the radio map, the measurement of the received signal strength indicator(RSSI) and the confirmation of node placement information counsume substantial time. Especially, when the installed wireless environment is changed or a new space is created, easy installation of the node and fast indoor radio mapping are needed to provide indoor location-based services. In this paper, to reduce the time consumption, we propose an algorithm to distinguish the straight and curve lines of a corridor section by RSSI visualization and Sobel filter-based edge detection that enable accurate node deployment and space analysis using cable-type Wi-Fi node installed at a 3 m interval. Because the cable type Wi-Fi is connected by a same power line, it has an advantage that the installation order of nodes at regular intervals could be confirmed accurately. To be able to analyze specific sections in space based on this advantage, the distribution of the signal was confirmed and analyzed by Sobel filter based edge detection and total RSSI distribution(TRD) computation through a visualization process based on the measured RSSI. As a result to compare the raw data with the performance of the proposed algorithm, the signal intensity of proposed algorithm is improved by 13.73 % in the curve section. Besides, the characteristics of the straight and the curve line were enhanced as the signal intensity of the straight line decreased by an average of 34.16 %.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.159-162
• /
• 2002

영상분석의 한 분야로서 에지 검출을 이용하는 많은 분야가 있다. 영상의 에지는 입력 영상에 대한 많은 정보를 제공해 준다. 본 논문에서는 입력영상에 대한 에지검출을 통한 윤곽선 추출을 하여 각각의 픽셀에 대한 에지검출 결과값을 비교하였다. 입력영상으로는 얼굴이미지를 사용하였으며 서로 다른 이미지에 대한 Sobel Filter의 검출의 결과 데이터를 각 픽셀마다 비교함으로써 원영상에 대한 동일인임을 판단하는 기준을 제시하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.592-594
• /
• 2003

이 논문에서는 wavelet과 sobel filter를 사용하여 영상의 객관적인 평가 점수를 계산하는 새로운 기법을 제안한다. 이 기법은 orthogonal wavelet 변환을 기초로 하고 있으며 원본 영상과 처리된 영상 데이터가 모두 가용하다는 것을 전제로 한다. Wavelet을 이용해 주파수에 따라 분할된 영상 정보를 이용해 각각의 부영역 별 차영상을 획득하고 이 획득된 영상의 에너지를 이용해 화질 평가 수치를 계산한다. 부영역 별로 획득된 영상은 일정한 크기의 블록으로 분할되어 동일한 블록 내에서 가용한 영상의 특징에 관한 정보(contrast, edge 영역의 분포 정도) 벡터와 내적하여 새로운 특징 벡터로 사용되고, 이 특징 벡터의 가중치를 최적화하여 높은 상관도의 화질평가 점수를 산출하게 된다.