• Food Science and Preservation
• /
• v.5 no.1
• /
• pp.73-80
• /
• 1998

Shelf-life of soybean curd prepared with ozone-treated soybeans investigated on pH, acidity, sour taste, slime formation during storage at 3$0^{\circ}C$. Total Plate counts of raw soybeans showed about log 7.0 CFU/g before ozone treatment. The sterilization efficiency of raw soybeans showed the most effective in 0.5ppm of aqueous ozone treatment at 4$^{\circ}C$ for 90 minutes. Raw soybeans were treated with ozone by different methods; (1) Ozone treatment for 90 + 90 minutes (first 3.5~5 hours and later 8.5~10 hours) of 10 hours during soaking in aqueous solutions at 4$^{\circ}C$ (OW). (2) Ozone treatment by exposure first to 30ppm of gaseous ozone for 90 minutes and then allied to OW method (GO+OW). The log reduction of raw soybeans treated by OW and GO+OW methods showed 3.72 and 4.15, respectively. Soybean curd prepared with OW and GO+OW-treated soybeans kept the shelf-life of 4 and 5.5 days at 3$0^{\circ}C$, respectively, but, that without ozone treatment spoiled at me day.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.312-312
• /
• 2017

The study was conducted to select optimal materials for promoting germination rate, high sprouting vigor by priming treatment using PEG 6000 (water potential -0.5 to 2.0 Mpa) and Azolla extracts (0.1, 1.0, and 10.0%) extracted by ethanol, distilled, and/or hot water in colored rice cultivars. Each rice seed (three black rice cultivars and two red rice cultivars) was soaked 24 and 48 hr including untreated control. In black rice, Joseongheugchal rice cultivar, azolla ethanol extract (0.1%) induced highest germination rate, germination speed was taken to 5 days in distilled water and to 3days in Azolla extracts extracted hot water. Otherwise, degree of bacterial inhibition (number of colony, $10^3cfu$) in dry seed, water soaking for 24hr, soaking with fungicide for 24hr and 48hr, soaking with fungicide and aeration for 24hr and 48 hr was 22, 500, 95, and 0.46, respectively. In order to minimize fungal inhibition, a method can be chosen to combination of soaking fungicide and aeration for 48 hr. In seed priming treatments using growth pouch, seed soaking with fungicide did not affect change of germination percentage and germination speed, it delayed only 2 or 4day in the Joseongheugchal rice cultivar. It differs from rice cultivars and priming materials, Azolla extract(0.1 to 1%) promotes seed germination percentage in the Ilpum, Hongjinju, and Joseonghuegchal, in addition, germination in Jeogjinju cultivar was only promoted by PEG solution(10 to 20%), otherwise, it showed much lower or inhibited on the germination in Heugjinju and Sinmyungheugchal rice cultivars. In a paddy field trial, seedling establishment rate by applying PEG6000 and azolla extract did not show significantly statistical difference. When it compared with untreated control, seedling establishment rate was increased over 50% in priming treatments. Interestingly, seedling establishment rate under azolla extract (0.1%) extracted with ethanol was promoted over 2.5 times compared to the control in a black rice, Joseongheugchal and red rice, Jeogjinju.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.152-164
• /
• 1982

1. In order to make the improvement of plywood quality, this study has been made. The pretreatments applied to the veneers are as follows. a) The soaking treatment of the veneer in 30 percent methanol solution for 24 hours was applied to remove some resinous materials which may cause many stain discolouring on the face of finished plywood. b) The preservative treatment of the veneer in 2 percent malenit solution for 2 to 3 minutes was adopted to make resistance against decay and insect damages. c) The fire retardant treatment of the veneer in 40 percent ammonium phosphate solution for 2 hours was applied to give retardation effect against fire burning. 2. The results summarized in this study are as follows. a) One percent resinous materials was extracted, after the soaking of the veneers in 30 percent diluted methanol. b) No marks of the dirty stains of resinous materials on the face of the treated plywood was shown, although many quite dirty stains on the face of untreated plywood have contrary seen. c) However, the strip shear test strength of the treated plywood was not decreased. It means that there is no difference in the strength between the treated plywood and the untreated plywood. The strength values were 25.08 kg/$cm^2$ and 24.98 kg/$cm^2$, respectively. d) The strip shear test strength of plywood made of the treated veneers in 2 percent malenit solution was not decreased. e) The slight decrease of the strip shear test strength of the treated plywood made of the treated veneer in 40 percent ammonuim phosphate solution was shown. However, the remarkable difference of the fire retardation activities between the treated specimens and the untreated specimens has seen as in Table 10, that is, the fire proofed specimens had taken about 28 seconds to start to burn, while the untreated specimens had taken 15 seconds to reach to burning. This means that the fire retardation effect of the fire proofed plywood was greater than that of the unproofed plywood.

• The Korean Journal of Pesticide Science
• /
• v.6 no.2
• /
• pp.64-71
• /
• 2002

Plant growth promoting activity of quinolinone metabolites, 2-(2-hepteny)-3-methyl-4-quinolinone (1), 2-heptyl-3-methyl-4-quinolinone, and 2-nonyl-3-methyl-4-quinolinone, produced by Pseudomonas cepacia and ethyl 2-methyl-3-alkyl-4-quinolinone carboxylates chemically synthesized were tested by using seed-germination assay, growth increments in plant height after foliar applications. Plant height increment, fresh weight, and the number of fruits were measured after seed-soaking and drench treatment. Compound 1 among the natural products showed a consistent growth promoting effect in seed-germination and plant height after a foliar application. After a seed-soaking and drench treatment, compound 1 and synthetic ethyl 2-methyl-4-quinolinone-3-carboxylate (5) showed a significant enhancement in fresh weight and the number of fruits after harvest. Compound 1 and 5 increased the number of fruits per plant by 44% and 84% over the control, respectively.

• The Plant Pathology Journal
• /
• v.34 no.5
• /
• pp.403-411
• /
• 2018

This study takes strawberry-fruits as the test material and discusses the effect of Burkholderia contaminans B-1 on preventing postharvest diseases and inducing resistance-related substances in strawberry-fruits. Soaking and wound inoculating is performed to analyze the inhibitory effects of different treatment solutions on the gray mold of postharvest strawberry-fruits. The count of antagonistic bacteria colonies in the wound is found, and the dynamic growth of antagonistic bacteria and the pathogenic fungus is observed by electron microscopy. The results indicated that, either by soaking/wound-inoculating, the fermentation and suspension of antagonistic bacteria significantly reduced the incidence of postharvest diseases of strawberry-fruits. With wound inoculation, the inhibition rate of antagonist fermentation and suspension ($1{\times}10^{10}cfu/ml$) respectively reached 77.4% and 66.7%. It also led to a significant increase in the activity of resistance-related enzymes, i.e., phenylalanine ammonia lyase (PAL), 4-coumarate coenzyme A ligase (4CL), cinnamate-4-hydroxylase (C4H) and chalcone isomerase (CHI). On 1 d and 2 d post-treatment, the activity of 4CL was respectively 3.78 and 6.1 times of the control, and on 5 d, the activity of PAL was increased by 4.47 times the control. The treatment of antagonistic bacteria delayed the peaking of cinnamyl-alcohol dehydrogenase (CAD) activity and promoted the accumulation of lignin and total phenols. The antagonistic bacteria could be well colonized in the wounds. On 4-5 d post-inoculation, the count of colonies was $10^8$ times of that upon inoculation. Electronmicroscopy indicated that the antagonistic bacteria delayed the germination of pathogenic spores in the wounds, and inhibited further elongations of the mycelia.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.91-100
• /
• 2011

This study is to examine the PEG concentration, and drying humidity and drying periods of humidity-controlled drying(HCD) for conservation of waterlogged woods(Pinus densiflora S. et Z.), and dimension stability of HCD were compared with those of air-drying and vacuum freeze-drying(VFD). Dimension stability of vacuum freeze-drying was the most excellent, i.e., PEG crystal was uniformly distributed in woods. Increasing concentrations of PEG, dimension stability of HCD was increased and drying periods decreased. Dimension stability of HCD after the treatment with the high concentration(70%) of PEG soaking was similar to those of VFD after the treatment with the low concentration(40%) of PEG soaking. In conclusion, high concentration(about 70% in water) PEG solution was the most suitable as a pre-treatment for HCD of waterlogged woods. However, drying should be maintained with enough high humidity and longer period.

• Forest Science and Technology
• /
• v.14 no.4
• /
• pp.160-168
• /
• 2018

The seeds of Elaeocarpus serratus, a tropical underutilized fruit tree are characterized by hard seed coat and consequent poor water uptake and low germination. To improve the regeneration through seeds, various parameters such as viability of seeds, water uptake, and effect of seed mass on germination and pretreatments were performed using a completely randomized design (CRD). Tetrazolium (TZ) test was conducted using fresh, mature seeds revealed $50{\pm}2.56%$ mean viability. Seeds of different weight classes showed similar pattern of water uptake and the saturation level was achieved at 60 hrs of soaking. Seeds belong to weight class 2.6-3.5g were germinated ($12.5{\pm}1.26%$) with $175{\pm}1.75days$ (d) of mean time taken for germination (MTG). Germination capacity of seeds varied significantly among different populations and Varkala population gave $12.5{\pm}1.1%$ germination with $174.6{\pm}2.5d$ MTG. Among various seed treatments, mechanical scarification was superior in germination and significant reduction in MTG ($p{\leq}0.05$). The mechanical scarification by complete removal of seed coat resulted in $49.2{\pm}1.52%$ germination within a short period of time ($9.52{\pm}0.89d$ MTG). However, the complete removal of seed coat without damaging to embryo is a difficult task. An alternate treatment (Mechanical scarification II) by making cracks on nut faces vertically followed by soaking in distilled water for 24 hrs gave $48.4{\pm}1.73%$ germination with significantly reduced MTG ($12.14{\pm}0.56d$) over unsoaked, untreated control ($6.5{\pm}1.84%$ germination and $197.18{\pm}1.79d$ MTG; $p{\leq}0.05$). This treatment (Mechanical scarification II) is therefore recommended for E. serratus seeds as it can adopt easily and can achieve 7 fold increases in germination over control. The recorded germination through mechanical scarification is in tune with realized viability percentage of the seeds.

• Plant Resources
• /
• v.6 no.3
• /
• pp.188-194
• /
• 2003

Present studies were carried out to produce tetraploid plants by colchicine treatment using seeds, seedlings and shoot tips of Platycodon grandiflorum in Campanulaceae. The most successful colchicine treatment for tetraploid production in P. grandiflorum was soaking treatment using 0.01 and 0.5% colchicine solution for 1 hour and 12 hours, respectively. Morphological characteristics of both diploid and tetraploid were similar, but tetraploid plants had more leaves. Compared to diploid, tetraploid had the larger stomata, but less number of stomata. Fresh weight of tetraploids was 20∼40% heavier than that of diploid.

• Korean Journal of Organic Agriculture
• /
• v.25 no.2
• /
• pp.345-355
• /
• 2017

This study was conducted to evaluate rice seed disinfection efficacy of loess-sulfur for the suppression of Bakanae disease caused by Fusarium fujikuroi. Rice seeds were treated at different concentrations of loess-sulfur, soaking time and temperature, and combination of hot-water treatment. Rice cultivar, Shindongjin harvested from Bakanae disease-infested area in 2015, was used. Loess-sulfur was treated as follows; concentration of undiluted solution, 2%, 1% and 0.5%; soaking time of 24 and 48 hours; treatment temperature of $20^{\circ}C$ and $30^{\circ}C$; hot water treatment or not. Optimal conditions of rice seed disinfection were selected soaking time of 48 hours and the suspension of 0.5% and 1% loess-sulfur by investigating seed germination and isolation frequency of Fusarium spp. on Komada agar medium in vitro, and were established 3 disinfection conditions as hot water ($60^{\circ}C$, 10 min.) + 1% loess-sulfur ($20^{\circ}C$, 48 hours), 1% loess-sulfur only ($30^{\circ}C$, 48 hours) and 1% loess-sulfur only ($20^{\circ}C$, 48 hours) through additional test in greenhouse. Above 3 conditions were verified by rice seedling box and paddy field test in the way of investigating Bakanae diseased plants (%) and healthy plants (%). Consequently, most effective rice seed disinfection conditions on Bakanae disease were combination of hot water and 1% loess-sulfur and loess-sulfur only at $30^{\circ}C$. Furthermore, treatments with these conditions showed control value of 100% were maintained from seedling to the heading stage in the field. However, treatment of 1% loess-sulfur only at $20^{\circ}C$ showed low control value of 78.2% in paddy field. Hot water only treatment turned out to be an effective disinfection method when conducted thoroughly with $60^{\circ}C$, 10 min. However, it was thought additional soaking process with loess-sulfur after hot water treatment served more high control effect against Bakanae disease when rice seeds were disinfected on a large scale. This results expected rice seed disinfection with loess-sulfur were effectively and easily usable method if farmers had only one of either hot water-disinfector or seed-disinfector. In addition, loess-sulfur is well-known to farmers, simple to manufacture method and cheap.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.100-107
• /
• 2010

This study was conducted to investigate the effects of electric current stimuli and high-voltage electric field treatments on brown rice germination. The brown rice stimulated by electrical current stimuli, functional electrical stimuli of a pulse type, and high-voltage electric field treatments were observed (Type I, II and III). Treatment Type I was a method of semi-soaking brown rice with electric current stimuli of 0.13 V/cm, 0.19 V/cm, and 0.25 V/cm into Petri-dishes for 72 hours. Type II was a method of semi-soaking brown rice with functional electrical stimuli of a pulse type(DC 1 V, 1 Hz, 5%, and duty cycles of 5%, 20%, and 35%) into Petri-dishes for 72 hours. Type III was a method of water-soaking with high-voltage electric field treatments for 60 hours. High-voltage electric field treatments at 15 kV/cm were also conducted for 2.5 min, 7.5 min, and 10 min, respectively. The germination rate and the sprout growth of brown rice germinated by electric current stimuli with 0.13 V/cm, 0.19 V/cm, and 0.25 V/cm were increased by about 10-15% compared with those of the control group. The germination rate and the sprout growth of brown rice germinated by functional electrical stimuli of pulse type(DC 1 V, 1 Hz, 5% duty cycle) were increased by about 10∼15% compared to those of the control group. Also, the best effective treatment among high-voltage electric field treatments was the 10 min group at 15 kV/cm. The germination rate and the sprout growth of brown rice germinated by this treatment of 10 min at 15 kV/cm were increased by about 10∼20% compared to those of the control group. The treatments of electric current stimuli and high-voltage electric field accelerated the germination rate and sprout growth of brown rice by about 10∼15% compared to those of the control group.