• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.51-54
• /
• 1999

Hydrogenated amorphous silicon (a-Si:H) films are fabricated by Argon radical annealing (ArRA). The deposition rate of continuously deposited a-Si:H film is 1.9 $\AA$/s. As ArRA time are increased to 0.5 and 1 minute, the deposition rate are increased to 2.8 $\AA$/s and 3.3 $\\AA$/s. The deposition rate of a-si:H films with 2 and 3 minutes ArRA time are 3.3 $\AA$/s. As the ArRA time is increased, the optical band gap and the hydrogen contents in the a-Si:H films are increased and slightly decreased. The light-induced degradation of ArRA treated a-Si:H films are less than that of continuously deposited a-Si:H film. The dark conductivity and the conductivity activation energy ($E_a$) of continuously deposited a-Si:H film are decreased to 1/25 in room temperature and increased to 0.09eV By 1 hour light soaking, respectively. The dark conductivity and $E_a$ of ArRA treated a-Si:H film decreased to 1/3 in room temperature and increased to 0.03eV by 1 hour light soaking, respectively. We could improve the stability of a-Si:H films under the light soaking by ArRA technique and discussed the microscopic process of ArRA technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.819-824
• /
• 2016

The accelerated thermal aging of CSPE (chlorosulfonated polyethylene) was carried out for 33.64 and 67.27 days at 110[$^{\circ}C$], equivalent to 40 and 80 years of aging at 50[$^{\circ}C$], respectively. These samples were referred to as CSPE-0y, CSPE-40y and CSPE-80y, respectively. As the accelerated thermally aged years of the CSPE increase, the insulation resistance[$\Omega$] at 20[Hz], 500[Hz], and 2[KHz], and the percent elongation [%EL] of the CSPE decrease. However, the dissipation factor($tan{\delta}$) at 20[Hz], 500[Hz], and 2[KHz], the apparent density[$g/cm^3$], the glass transition temperature and the melting temperature of the CSPE were increased. The period of time that the voltage has to be applied until electric breakdown of the CSPE-0y is longer than that of the CSPE-40y, and the CSPE-80y, but the dielectric strength of the CSPE-80y is lower than that of the CSPE-0y and the CSPE-40y. The differential temperatures after the AC and DC voltages are applied to CSPE-0y, CSPE-40y and CSPE-80y are 0.026~0.028[$^{\circ}C$], 0.030~0.042[$^{\circ}C$], 0.018~0.045[$^{\circ}C$], respectively. The variations of temperature for the AC voltage are higher than those for the DC voltage when an AC voltage is applied to CSPE-0y, CSPE-40y and CSPE-80y. It is found that the dielectric loss owing to the dissipation factor[$tan{\delta}$] is related to the electric dipole conduction current. It is ascertained that the ionic (electron or hole) leakage current is increased by the separation of the branch chain of CSPE polymer from the main chain of the polyethylene as a result of thermal stress due to accelerated thermal aging as well as by conducting ions such as $Na^+$, $Cl^-$, $Mg^{2+}$, $SO_4^{2-}$, $Ca^{2+}$ and $K^+$ after seawater soaking.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.18-23
• /
• 1990

Seven varieties of soybeans(Paldal, Danyeob, Jangbaek, Baegun, Jangyeob and 2 cultivars of Local 1 and Local 2) were investigated to compare the water uptake properties and volume changes during soaking in water. The hydration properties showed that the equilibrated weight increase ratio decreased as the soaking temperature raised to higher than $40^{\circ}C$, while the initial water uptake rate increased upto $80^{\circ}C$. The increase in hydration showed a linear relationship with the square root of the soaking time at $4^{\circ}{\sim}60^{\circ}C$. Local 1 was the highest in water uptake rate constant while Local 2 was the lowest. The activation energy calculated was in the range of $3,246{\sim}4,694\;cal/mole$. The Jangbaek and Local 1 were the highest and the Paldal was the lowest in the rate of volume increase. The activation energy for volume increase was in the range of $3,310{\sim}4,190\;cal/mole$. The z-values calculated from volume change was a little higher than those obtained from weight change.

• Korean Journal of Plant Resources
• /
• v.26 no.5
• /
• pp.636-644
• /
• 2013

We examined the effects of soaking, saturation, and aging conditions of raw cowpea seeds, on the yield and growth responses of cowpea sprouts. The absorption caused rapid growth for the first two hours of soaking, then the growth slowed. The longer the soaking period (varied from 1 to 6 hours), the lower the germinability, yield ratio, and lateral root output became. A five-day saturation (moist $96{\pm}1%$, $20^{\circ}C$) treatment led to higher germinability, yield ratio, and lateral root output than no treatment and one- or three-day saturation treatment. High-temperature aging treatment led to lower germinability and yield ratio compared to no such treatment. Taking these findings into account, the optimal treatment conditions of raw cowpea seeds are a five-day saturation (moist $96{\pm}1%$, $20^{\circ}C$) treatment followed by cleaning and growing.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.111-115
• /
• 2009

The seeds of Phellodendron amurense have difficulty to obtain because these plants show dioecism with independent distributions. This experiment was conducted to find the effects of soaking and prechilling treatment on the germination of P. amurense seeds. Seeds were soaked for 3, 5 and 10 days (soaking treatment), and placed on petri-dish at $4^{\circ}C$ for 10, 20, 30 and 50 days after soaked at room temperature for 24 hours (prechilling treatment). After the treatments, germination percentage, mean germination time, germination speed and germination performance index were analyzed. As a result of sowing, prechilled seeds for 30 days had the highest percent of germination, whereas all of the soaked seeds showed lower percent of germination than non-treatment (control). In case of mean germination time, only prechilling for 30 days was more effective than control. In germination speed, all of the soaked seeds had lower values than control whereas all prechilled seeds except prechilled seeds for 20 days showed higher values than control. Especially prechilled seeds for 30 days showed the highest rate among the prechilling treatments. Germination performance index was similar to germination speed.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.229-235
• /
• 1995

We were studied to the effect of alloying element and retained austenite on a mechnical properties and that used steels were composed three types composition. According to the soaking temperature, a retained austenite was pricipitated in the bainitic ferrite matrix and it was pricipitated to a flake type of about $2{\mu}m$, a mixture of massive and bar type and a flake type of about $1{\mu}m$ size. Through x-ray diffraction analysis, the amount of retained austenite was increased with addition of Si and Ni for equal heat treatment condition and it was best abundanted in the soaking temperature of $855^{\circ}C$. The balance value of strength and elongation were complexly controlled not only a retained austenite formation but also a formation characteristic and shape of the retained austenite and bainite. The balance value of strength and elongation were most satisfactory obtained with "B" and "C" specimens in a firstly heat treated at $855^{\circ}C$ and the best result was that a $2840kg/mm^2.%$ with the heat teratment condition of $855^{\circ}C-400^{\circ}C$ used for "C" specimen.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.1
• /
• pp.35-40
• /
• 2010

Corn stover, hemp woody core and tobacco stalk were treated by dilute ammonium hydroxide soaking for improving the enzymatic saccharification of cellulose and xylan to monosaccharides by commercial cellulase mixtures. As more lignin removal by dilute ammonium hydroxide impregnation led to more enzymatic saccaharification of cellulose and xylan to monosaccharides (corn stover vs tobacco stalk). There was no relationship between xylan removal by dilute ammonium hydroxide impregnation and enzymatic saccharification of polysaccharides in pretreated samples. Except corn stover, lower temperature and longer treatment ($50^{\circ}C$-6 day) was less lignin removal than higher temperature and shorter treatment ($90^{\circ}C$ 16 h). Corn stover showed the highest enzymatic saccharification of cellulose and xylan but tobacco stalk showed the lowest.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.4
• /
• pp.330-336
• /
• 2022

In order to evaluate the possibility as a separator in alkaline water electrolysis, the high temperature characteristics were evaluated by measuring the membrane resistance and durability of 5 types of commercial anion exchange membranes in 7 M KOH solution and at 80℃. The membrane resistance of AEM membrane measured in 7 M KOH solution and at 80℃ had a lower value of about 8-24 times compared to the other membranes. The durability of AEM membrane tested with the soaking time in 7 M KOH solution and at 80℃ showed a very good stability and that of FAAM40 and FAAM75-PK showed secondly a good stability. The thermal stability with the soaking time in 7 M KOH solution and at 80℃ of FAAM40 and FAAM75-PK membrane analyzed by thermo-gravimetric analysis showed a good stability compared to the other membranes.

• Korean Journal of Medicinal Crop Science
• /
• v.8 no.3
• /
• pp.259-265
• /
• 2000

This study was carried out to investigate the effect of soaking time of seed disinfectant, Fludioxonil on the germination and disease occurrence of adlay (Coix lacryma-jobi L. var. ma-yuen Stapf). The germination rate was higher in the seed disinfectant treatment for 3 days followed by seed soaking for 3 days than that of other treatments under controlled condition of low temperature. The value of two experiments were 90.8%, 96.7%, repectively. And, the time of seed soaking was longer, the more seed rot was proportionly decreased. In the pot and field experiment, germination rates were somewhat low compared to that of petri dish experiment as 88.3%, 84.3%, and occurence of seedling blight showed similar results that of petri dish experiments. There was not significantly different in the yield components among treatments in the field. However, as compared with untreated plot (194kg/10a), unhulled grain yield was increased about 26% on that treatment. Based on these results, it has been thought that improvement of the germonation rate and decrease of disease occurrence of adlay were accompanied with the seed disinfectant during 3 days followed by seed soaking during 3 days before sowing.

• Korean Journal of Food Science and Technology
• /
• v.21 no.4
• /
• pp.575-582
• /
• 1989

An investigation was carried out to improve the quality and yield of barley tea(water extracts) by modifying the roasting method. The modified methods employed were crushing the barley into 4-10 parts and soaking in water at room temperature for 20 minutes followed by roasting (light brown or dark brown) at $250^{\circ}C$ before boiling with water. The varieties of barley used for this study were Ol-bori(with hulls) and Youngsan-bori(without hulls) and the qualities measured were the physical, chemical and sensory characteristics of roasted barley and its extracts. The results showed that the higher solid yields in barley tea was obtained with an increase in soaking and roasting time. The solid yields increased rapidly with extraction time in boiling water until 30 minutes and then slowed down thereafter. However the intrinsic viscosity of barley tea was reduced by increase in soaking and roasting time. The color of barley tea expressed as Hunter L, a, b values showed that lower L value and higher a and b values were measured for those prepared without soaking and with more extensive roasting. Organoleptic evaluation clearly showed that the sensory quality of barley tea was significantly improved in intensity of odor and taste by crushing, soaking and dark brown roasting.