• 한국축산식품학회지
• /
• 제32권3호
• /
• pp.316-322
• /
• 2012

This study was conducted to evaluate the effects of soaking pH and extraction temperature on the physicochemical properties of chicken skin gelatin. In order to extract gelatin from chicken skin, the chicken skin was soaked at various pH ranges (1-13) and was extracted at 75 and $100^{\circ}C$. For the rate of weight increase, the highest value was obtained from two pH ranges (1-2 and 12-13). In addition, the rate of weight increase was affected by soaking time. The alkali treatments had greater crude protein content as well as total extraction yield compared to the acid process (p<0.05), and the increased extraction temperature resulted in a significant (p<0.05) increase of crude protein content and total extraction yield. All treatments showed ${\alpha}1$ and ${\alpha}2$ chains derived from type I collagen on SDS-PAGE. The pH value and color of gelatin gel (6.67%) were affected by soaking pH and extraction temperature. Chicken skin gelatin gel extracted at $75^{\circ}C$ after soaking at a pH of 2 had the highest melting point (p<0.05) and gel strength among all treatments. Although the chicken skin treated with the alkali process had a higher yield, a lower extraction temperature following the acid process would be better for obtaining superior gelatin from chicken skin.

• 신재생에너지
• /
• 제6권4호
• /
• pp.6-14
• /
• 2010

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. Extrusion is a well established process in food industries and it can be used as a physicochemical treatment method for cellulosic biomass. Aqueous ammonia soaking treatment at mild temperatures ranging from 60 to $80^{\circ}C$ for longer reaction times has been used to preserve most of the cellulose and hemicellulose in the biomass. The objective of this study was to evaluate the effect of extrusion treatment on aqueous ammonia soaking method. Extrusion was performed with miscanthus sample conditioned to 2mm of particle size and 20% of moisture content at $200^{\circ}C$ of barrel temperature and 175rpm of screw speed. And then aqueous ammonia soaking was performed with 15%(w/w) ammonia solution at $60^{\circ}C$ for 1, 2, 4, 8, 12 hours on the extruded and raw miscanthus samples respectively. In the combined extrusion-soaking treatment, most compositions removal occurred within 1~2 hours and on a basis of 1 hour soaking treatment values, cellulose was recovered about 85% and other compositions, including hemicellulose, are removed about 50% from extruded miscanthus sample. The combined extrusion-soaking treated and soaking only treated samples were subjected to enzymatic hydrolysis using cellulase and ${\beta}$-glucosidase. The enzymatic digestibility value of combined extrusion-2 hours soaking treated sample was comparable to 12 hours soaking only treated sample. It means that extrusion treatment can shorten the conventional long reaction time of aqueous ammonia soaking. The findings suggest that the combination of extrusion and soaking is a promising pretreatment method to solve both problems for no lignin removal of extrusion and long reaction time of aqueous ammonia soaking.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1227-1234
• /
• 1994

A cold spot temperature control system for the batch annealing furnace has been established in order to reduce energy consumption which is essential to improve productivity and stabilize the properties of products. A relationship between annealing cycle time and gas flow rate is developed and also for the variation of coil cold spot temperature with time during heating, and actual temperature measurements at mid-width of each coil during soaking. The results of the temperature variation effect on the cold rolled steel sheet batch annealing are as follows. (1) Cooling rate increasing gradually with increasing atmospheric gas flow, but heating rate is hardly increasing without atmospheric gas component change. (2) In case of short time heating, the slowest heating part is the center of B coil and in case of ling time heating, the low temperature point moves from the center of coil to inside coil. (3) The outside of top coil is the highest temperature point under heating, which becomes the lowest temperature point under cooling. (4) Soaking time determination depends on the input coil width, and soaking time for quality homogenization of 1214 mm width coil must be 2 hours longer than that of 914 mm width coil.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1535-1544
• /
• 1989

The overhang structure of photoresist in optical lithography was studied for the metallization of GaAs-related devices throughout lift-off method. Optical contact aligner with a dose of 8.5 m J/cm\ulcornerand with a wavelength of 300mm was used for ultraviolet exposure of single layer of S1400-27 photoresist. The overhang thickness shows a linear relationship with the soaking time in monochlorobenzene, which its magnitude becomes high at elevated softbake temperature. Such process conditions as a low softbake temperature, a long monochlorohbenzene soaking time and a little exposed energy make the development rate of photoresist lower. The optimum process conditions to obtain a target line-width, which include an appropriate overhang structure such as complete separation between the sidewall of photoresist pattern and the deposited metal edge, are determined as the softbake temperature of 64-74\ulcornerC, the monochlorobenzene soaking time of 10-15min, the ultraviolet exposure time of 70-100sec and the development time of 50-80sec.

• 대한가정학회지
• /
• 제30권3호
• /
• pp.101-117
• /
• 1992

Effects of gamma irradiation(2.5∼20kGy) on water absorption property was studied for a local variety of black soybeans. In water absorption patterns of black soybeans, the time to reach a fixed moisture content was reduced depending on the increment of water soaking temperature and irradiation dose. Irradiation at 2.5∼10kGy resulted in the reduction of soaking time of black soybeans by about 1∼3 hours and the increase of hydration capacity by 10∼20%, respectively, compared to the nonirradiated control black soybean. The water uptake rate constant of the irradiated black soybean difinitely increased with the increase of dose levels and water soaking temperature. The activation energy for water absorption and z-value were lower in the irradiated black soybeans than in the nonirradiated control black soybean. The efficacy of water absorption property in the irradiated black soybeans was also recognized after one year of storage at room temperature.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.61-66
• /
• 2009

Effects of aqueous ammonia soaking treatments to yellow poplar (Liriodendron tulipifera L.) were investigated to focus on chemical compositional changes and enzymatic hydrolysis characteristics changes by this treatment. Treatment temperature and time were main variables. At 3 different levels of aqueous ammonia soaking temperature and time ($145^{\circ}C$ -1 h, $90^{\circ}C$ -16 h and $45^{\circ}C$ - 6 days), lower temperature and longer soaking time led to more xylan removal based on carbohydrate compositional analysis. However, at higher temperature treatment led to more enzymatic saccharification of cellulose to glucose by commercial cellulose mixtures (Celluclast 1.5L and Novozym 342 from Novozyme, Denmark). Cellulose hydrolysis was gradually increased with increasing enzymatic hydrolysis time but xylan hydrolysis was leveled out at early stage (less than 10 h) of enzymatic hydrolysis.

• 한국식품과학회지
• /
• 제18권6호
• /
• pp.497-502
• /
• 1986

새알, 광교, 단엽의 3가지 대두품종을 시료로 하여 그들의 침지과정중 고형물의 용출에 따르는 침지온도의 영향을 비교 검토하였다. 고형물용출량은 침지온도와 침지시간에 높은 의존성을 나타내었으며 $C=k{\cdot}{\sqrt{t}}$의 관계식으로부터 고형물용출속도상수값을 구한 결과 $10{\sim}33mg/min$의 범위에서 대체로 온도가 높아지면 용출속도가 커짐을 알 수 있었다. 이 때의 총괄물질이동계수값은 새알의 경우 실온에서 $67.7mg/m^2{\cdot}h$으로 다른 품종에 비해 그 값이 높았으며 활성화에너값은 4026cal/mole이었다. 일정량의 고형물이 용출될때까지의 Z값을 비교해 보면 용출량이 많아지면서 Z값은 낮아지는 경향을 보이고 있다.

• 한국식품과학회지
• /
• 제35권4호
• /
• pp.604-609
• /
• 2003

칼슘용액에 쌀을 침지하여 침지용액의 온도(20, 30, 40, 50, $60^{\circ}C,\;X_1$), 침지용액의 칼슘 농도(0, 250, 500, 750, 1000 mg/L, $X_2$) 및 침지시간(5, 10, 15, 20, 25 min, $X_3$)에 따른 칼슘의 이행정도와 이들 변수들의 상관관계를 검토하기 위하여 침지 한 후 쌀의 수분 흡수율, 경도 및 칼슘함량을 분석하고 각 조건별 상관관계를 검토하였다. 수분 흡수율은 침지용액의 온도와 침지시간을 증가시킴에 따라 증가하였으며(p<0.01), 상호작용 및 이차항 효과도 5% 이내의 유의성이 있었다. 수분 흡수율$(Y_1)$에 대한 각종 변수들 간에는 $Y=16.14+0.78X_1+1.24X_3-0.23X_1{^2}+0.14X_2{^2}-0.42X_3X_1-0.38X_3{^2}(R^2=0.9123)$의 관계가 성립되었다. 경도는 침지시간 및 침지용액의 온도가 증가함에 따라 감소하였다(p<0.01). 침지 쌀의 칼슘함량은 침지용액의 온도, 침지용액의 칼슘 농도, 침지 시간이 증가함에 따라 증가하였으며(p<0.01), 침지시간과 침지용액의 칼슘 농도 사이에 높은 상호작용 효과(p<0.01)가 관찰되었다. 칼슘함량$(Y_3)$에 대한 각종 변수들 간에는 $Y_3=470.80+110.87X_1 +123.47X_2+52.29X_3-7.42X_1{^2}-14.87X_2{^2}-9.49X_3X_2-20.57X_3{^2}(R^2=0.9840)$의 관계가 성립되었다. 본 연구결과를 바탕으로 성인의 경우 일반 쌀 대신 칼슘을 600 mg/kg 정도, 어린이 및 청소년은 $700{\sim}900\;mg/kg$ 정도의 농도로 강화시킨 쌀 400 g을 하루에 섭취한다면 별도의 칼슘강화제 없이도 권장 섭취량 이상의 칼슘을 섭취할 수 있을 것으로 기대된다.

• 한국식품위생안전성학회지
• /
• 제37권6호
• /
• pp.400-410
• /
• 2022

본 연구에서는 비가열 떡 제조업체 3곳을 대상으로 원재료, 제조설비 및 계절별 제조공정에 대한 미생물 오염도를 분석하였고, 여름철 불림 시간에 따른 미생물 오염도 및 불림 수 온도 조절을 통한 미생물 저감 효과를 확인하고자 하였다. 3업체의 원재료 일반세균수는 2.69-5.08 log CFU/g 범위로 검출되었으나 제조공정 중 불림공정에서 미생물 오염도가 급격히 증가함을 확인하였다. 계절에 따른 제조공정별 미생물 오염도 분석결과, 여름철 불림공정에서 일반세균 및 대장균군이 7.01 및 3.96 log CFU/g로 다른 계절에 비해 유의적으로 높게 나타났고, 이후 공정에서도 높은 오염도를 유지하여 냉동공정에서 일반세균이 6.24 log CFU/g로 법적인 기준을 초과하여 검출되었다. 여름철 불림 초기 수온은 19.1℃에서 불림 12시간 후 26.8℃까지 상승하였고, 불림시간에(3, 6, 9, 12 h) 따른 제조공정별 미생물 오염도 분석결과, 불림시간이 길어질수록 미생물 오염도가 유의적으로 높게 나타났고, 불림 9시간 이후부터 냉동공정의 일반세균 수치가 냉동식품의 법적인 기준을 초과하여 검출되었다. 여름철 불림 수의 온도 상승을 억제하기 위하여 얼음팩을 이용하여 불림 수온을 조절한 결과, 불림 12시간까지 20.1℃로 유지되어 조절 전보다 약 7℃가량 낮게 나타났다. 이에 따른 제조공정별 미생물 오염도 분석결과, 3업체의 불림 12시간 이후 냉동공정 일반세균 평균값이 4.42 log CFU/g로 조절 전보다 1.77 log CFU/g 감소한 것으로 확인되었다. 이상의 결과로 볼 때, 안전한 비가열 냉동떡 생산을 위해서는 업체에 맞는 불림시간 및 불림 수 온도조절 등의 선행요건 관리기준 설정이 필요하며, 이러한 선행요건 관리기준의 적용으로 비가열 냉동떡 제조 HACCP system의 안전성이 확립될 수 있을 것으로 판단되었다.

• 한국잠사곤충학회지
• /
• 제10권
• /
• pp.57-58
• /
• 1969

Artificial silkworm eggs must do washing the acid completely after soaking HCl. Author experimented following deacidification times: 30 minutes, 1 hour, 2 hours, 6 hours soaking and 12 hours soaking eggs in the fresh water after artificial hatching, and incubated room temperature. There was no difference 1 hour's with control but more than 1 hour deacidification influenced badly in hatching ratio. Especially above than 6 hours deacidification was not only delaying 1 day in hatching date but also decreasing in practical hatching ratio.