• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.419-422
• /
• 2005

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause fellowing the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.962-965
• /
• 2005

This study is an inspection of press forming product and mould using reverse engineering system. The inspection process on production field involves a lot of errors because of the hand-work so we focussed on improving the measured precision through performing the effective inspection using 3D non-contact scanner. By so doing that, we improved the precision of press forming product by analyzing the cause following the inspection result. Through the inspection, we applied it to the reverse engineering and we could improve the inspection process.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.79-85
• /
• 1999

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor system because of little friction, no lubrication, no noise and so on. The magnetic levitation system needs the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of sensor easily goes into troublesome caused by sensor failure discord between the measurement point and the control point etc. This paper gives a controller design method of magnetic levitation system which satisfies the given $H_{\infty}$ control performance and the robust stability of the presence of physical parameter perturbations. To the end, we investigated the validity of the designed controller through results of simulation.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.1
• /
• pp.69-77
• /
• 1999

This paper describes an expert system of progressive die. Because of the complexity for die structure and of the critical problems for press machine mechanism in the progressive press process such as, the travel length in process, the equalized press load, and the other design parameter, it has been increased the requirement of the CAD system for progressive die design more an more. So, through this study, an expert system of progressive die has been developed. The results from the system developed were suggested the possibility of applications in the practice. To develop this system, it has used c-language under the HP-UNIX system and CIS customer language of the EXCESS CAD/CAM system. An application of this system will provide effective aids to the designer in this field.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.23-30
• /
• 1986

A waste heat recovery system for an internal combustion engine for agriculture was developed. The system is for recovering both of exhaust heat and cooling heat of an engine and is so simple in its structure that can be used in rural area easily. A series of experiment was carried out to the experiment which will be discussed later on, collect data for the performance of the system at various operating conditions of the system and an engine and to determine a range of coolant temperature in which performance of an engine is not affected by the heat recovery system incorporated. The obtained experimental data is not only useful to materialize performance of the system at the experimental conditions but also to construct a mathematical model of the system to predict the system variables beyond the scope of

• Korean Journal of Psychosomatic Medicine
• /
• v.25 no.1
• /
• pp.27-32
• /
• 2017

Objectives : The purpose of this study was to determine the association between serum lipid profiles and depression according to gender difference. Methods : This retrospective cohort study included 27,452 subjects(15044 men and 12408 women) who underwent health examination. The duration was from January 2013 to December 2013. We estimate the correlation between serum lipid profile and Beck Depression Inventory(BDI) scores. We compare the effect size using beta coefficient. Results : In men, serum Triglyceride level was correlated positively with BDI scores(r=0.020, p<0.01). Serum LDL-C and HDL-C were negatively correlated with BDI scores(r=-0.015, p<0.01 ; r=-0.016, p<0.05). In women, Triglyceride level was also correlated positively with BDI scores(r=0.020, p<0.01), Serum HDL-C were negatively correlated with BDI scores(r=-0.019, p<0.01). There was no statistical significance between Serum LDL-C and Beck Depression Inventory(BDI) score. Conclusions : Both men and women had more depressive symptoms when they had low serum HDL-C level or high serum Triglyceride level. The depression symptoms were more severe when serum LDL-C level was low only in men.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.509-512
• /
• 2008

Ubiquitous Computing System란, 언제 어디서나 통신 및 컴퓨팅이 가능하고 컴퓨팅 시스템이 상호간에 정보를 공유하고 협력하는 컴퓨팅 시스템이다. 이로써 기존의 컴퓨팅 환경과 같이 사용자와 컴퓨터간의 대화형 상호작용이 아닌 물리적인 환경 상황(Context)등을 시스템이 스스로 인식하고 이를 기반으로 사용자와의 상호 작용을 지원하는 상황인식 기술이 필수적인 요소로 부각되고 있다. 또한, Ubiquitous Computing System을 위해 사용자 및 주변 환경 정보를 감지하는 센서(Sensor) 기술이 필요하다. 하지만 사용자 및 주변 환경으로부터 입력되는 불확실하거나 모호한 상황정보에 대한 표현과 추론에 대한 연구는 부족한 실정이다. 본 논문은 이런 이유에서 Rule-based System을 기반으로 CRS와 DOS의 개념을 도입한 새로운 상황인식 기반의 Architecture를 제안하고, 이를 VHDL을 통해 SoC로 구현하였다. CRS를 통해 실시간으로 다양한 센서에서 들어오는 많은 데이터에 가중치를 부여하여 각 센서마다 중요도를 달리 부여한다. 이로써, System은 Sensor 입력 값의 중요도에 따라 처리 순서를 우선적으로 부여하여 처리 속도를 높인다. 또, DOS를 통해 각양각색의 사용자에게 획일적인 서비스를 제공하는 것이 아니라 상황 변화의 패턴에 따라 개별화되고 특화된 서비스를 제공한다. 마지막으로, Ubiquitous Computing System의 향후 발전 가능성을 예상하고, 본 논문에서 제시한 Context-aware Architecture에 의해 구현된 UoC의 유용성을 짐작해 본다.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1163-1170
• /
• 2010

In this paper, in order to develop a remote progress management system through the Internet, we show a design method to make easy maintenance by developing the system with both the JAVA language and GoF Design Patterns. For the system implementation, we added the RS232C and RS422/RS485 communication modules to PLC(Programmable Logic Controller) in the control box which provide the real time status data of machines. Also we set up the RS232C to Ethernet converter based on wireless environment to communicate the PLC control data. We use JAVA Swing components to implement the multi-tier architecture system supported the GUI of the Applet and Frame at the same time so that the manager grasps the progress of work easily at the remote machines through the Internet. The key objective of the multi-tier architecture is to share resources among clients, this proposed system can help to develop the software to control the remote machine, and also it has the advantage that developer who wants to make a similar software can make easy to add new function reusing the existing codes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.774-777
• /
• 2001

This paper describes a research work of developing a computer-aided design system of cold forging products. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plastic theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoCAD with a personal computer and is composed of six modules, which are selection of billet material, input of final product, process planning design, preform modification, insert design, shrink rings design module. Based on knowledge-based rules, the system is designed by considering several factors such as volume constancy, limite of formability by material, preform shape and so on.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.776-781
• /
• 2001

To enhance thermal efficiency of thermal facility through recovery of low and medium temperature waste heat, 1MW organic Rankine cycle system was designed and developed. The exhaust gases of $175^{\circ}C$ at two 100MW power plants in pohang steel works were selected as the representative of low and medium temperature waste heat in industrial process for the heat source of the organic Rankine cycle system. HCFC-123, a kind of harmless refrigerant, was chosen as the working fluid for Rankine cycle. The organic Rankine cycle system with selected exhaust gases and working fluid was designed and constructed. From the operation, it was confirmed that the organic Rankine cycle system is available for low and medium temperature waste heat recovery in industrial process. The optimum operating manuals, such as heat-up of hot water, turbine start-up, and the process of electric power generation, were derived. However, electric power generated was not 1MW as designed but only 670kW. It is due to deficiency of pump capacity for supply of HCFC-123. So it is necessary to increase the pump capacity or to decrease the pressure loss in pipe for more improved HCFC-123 supply.