• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.455-459
• /
• 1998

In this paper input Series-Output Parallel connected converter configuration for high voltage power conversion applications is proposed and a control method to solve the problems of Input Series-Output Paralles connected converter configuration is introduced. In this configuration snubber circuit or voltage balancing controller that is necessary for the series connection of switching devices is not needed. The effectiveness of this proposed configuration is verified by simulation.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.85-93
• /
• 1995

The vibration of the dehydration process in a washing machine is important problem that affects the performance of products. In this paper, the upper structure of a washing machine is modeled as rigid body suspension system and, by numerical analysis, the amplitude of a spin basket and the transfer moment at a base plate are calculated. To examine the vibrational characteristics according to design variable change, the friction coefficient in anubber, the radius of curvature, the stiffness coefficient, initial length and locations of support springs are considered in the analysis. Experimental results are compared with those of analysis.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1857-1859
• /
• 1998

This paper proposes a circuit technique that reduces losses cauased by reverse-recovery characteristics of the diode in converters. In high voltage, high power, Reverse recovery characteristics of the diode gives large stresses to switching devices. To solve the problem, we propose a circuit with active snubber between diode and switch. By controling di/dt rate of thr diode, the proposed technique reduces the losses and the stresses of switching devices.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.526-528
• /
• 2005

Nowadays, more than ever before, many researchers are paying attention to raising the efficiency of a Power converter. In Flyback converter, the resistor of RCD snubber consumes the stored energy in leakage inductor. It play a role in degrading the overall system efficiency Thus, In this paper, a novel energy recovery circuit of Flyback converter is proposed to improve the efficiency. The operational principle of the proposed circuit is explained in detail. And, it is verified through the simulation results.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.249-252
• /
• 2001

A large number of soft switching topologies included a resonant circuit have been proposed. But these circuits increase number of switch in circuit and complicate sequence of switching operation. In this Paper, the authors propose power conversion system, DC-AC inverter of high efficiency and high power factor with soft switching mode by partial resonant method. The result is that the switching loss is very low and the efficiency of system is high. And the snubber condenser used in partial resonant circuit makes charging energy regenerated at input power source for resonant operation.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.698-701
• /
• 2001

Loss analyses of two soft switching techniques for two-transistor forward converters are presented. The sums of snubber conduction and capacitive turn-on losses for two transistors are calculated to compare the losses of two techniques. While the conventional soft switching technique shows the loss difference between two transistors, proposed soft switching technique shows equal as well as lower loss in two transistors.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.15-16
• /
• 2014

본 논문에서는 기존의 에너지 회생 스너버 회로에 대해 고찰하고 주 스위치 전압 스트레스 감소를 위한 최적의 트랜스포머 에너지 회수 방법을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.153-154
• /
• 2015

본 논문에서는 보조 스너버 회로가 없는 고효율의 1단 부스트-플라이백 역률개선 컨버터를 제안한다. 제안된 컨버터는 높은 역률을 위한 부스트 역률개선 셀과 전기적 절연을 위한 플라이백 DC-DC 모듈로 구성된다. 입력전력의 일부분은 출력단으로 직접 전달되기 때문에 효율이 증가한다. 그리고 누설인덕터의 에너지가 DC링크 캐패시터에 흡수되기 때문에 별도의 스너버 회로가 필요하지 않다. 제안된 컨버터는 이론적 해석과 100[W]하드웨어 시작품을 제작하여 검증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.361-368
• /
• 2015

Recently, the earthquake has been increasing a lot, damage of electric power facility has been serious as well. Nowadays, the importance of pipe support system such as Hanger, Brace, Snubber connecting the main structure have been emphasized. These devices can prevent pipe from damage so that reduce the vibration and shock acting on the pipe. For this reason, the FCD(Friction Concave Damper) was developed and has been expected to reduce the vibration on the pipe through the Friction Pendulum System. This paper was described the introduction of self-developed mechanical damper using the friction pendulum principle and the characteristic test was performed to verify the performance of the device. Additionally the test results have been compared with predicted F.A.P(FCD Analysis Program-self developed) results. As a result, reliability of design could be improved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.45-52
• /
• 2005

This paper is studied on boost AC-DC converter of high power factor and high efficiency for discontinuous current control. The converter operated in discontinuous current control eliminates the complicated circuit control requirement, and reduces a number of components. The input current waveform in proposed circuit is got to be a discontinuous sinusoidal form in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control circuit is simple. Also the switching devices in a proposed circuit are operated with soft switching by the partial resonant method. The result is that the switching loss is very low and the efficiency of system is high. The partial resonant circuit makes use of a inductor using step up and loss-less snubber capacitor. The circuit topology of the converter is simplified. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.