• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1873-1878
• /
• 2013

ITZO ($In_2O_3$ : $SnO_2$ : ZnO = 90wt.% : 5wt.% : 5wt.%) thin films were fabricated on glass substrates (Eagle 2000) at room temperature with various working pressures (1~7 mTorr) by RF magnetron sputtering. The influence of the working pressure on the structural, electrical, and optical properties of the ITZO thin films were investigated. The XRD and FESEM results showed that all ITZO thin films are amorphous structures with very smooth surfaces regardless of the working pressure. Amorphous ITZO thin films deposited at 3 mTorr showed the best properties, such as a low resistivity, high transmittance, and figure of merit of $3.08{\times}10^{-4}{\Omega}{\cdot}cm$, 81 %, and $10.52{\times}10^{-3}{\Omega}^{-1}$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.208-208
• /
• 2010

Indium zinc tin oxide (IZTO) thin films were studied as a possible alternative to indium tin oxide (ITO) films for providing low-cost transparent conducting oxide (TCO) for thin film photovoltaic devices. IZTO films were deposited onto glass substrates at room temperature. A dc/rf magnetron co-sputtering system equipped with a ceramic target of the same composition was used to deposit TCO films. Earlier studies showed that the resistivity value of $In_{0.6}Zn_{0.2}Sn_{0.2}O_{1.5}$ (IZTO20) films could be lowered to approximately $6{\times}10^{-4}ohm{\cdot}cm$ without sacrificing optical transparency and still maintaining amorphous structure through the optimization of process variables. The growth rate was kept at about 8 nm/min while the oxygen-to-argon pressure ratio varied from 0% to 7.5%. As-deposited films were always amorphous and showed strong oxygen pressure dependence of electrical resistivity and electron concentration values. Influence of forming gas anneal (FGA) at medium temperatures was also studied and proven effective in improving electrical properties. In this study, the chemical composition of the targets and the films varied around the $In_{0.6}Zn_{0.2}Sn_{0.2}O_{1.5}$ (IZTO20). It was the main objective of this paper to investigate how off-stoichiometry affected TCO characteristics including electrical resistivity and optical transmission. In addition to the composition effect, we have also studied how film properties changed with processing variables. IZTO thin films have shown their potential as a possible alternative to ITO thin films, in such way that they could be adopted in some applications where currently ITO and IZO thin films are being used. Our experimental results are compared to those obtained for commercial ITO thin films from solar cell application view point.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.203-204
• /
• 2009

The Indium Zinc Tin Oxide (IZTO) thin films for flexible display electrode were deposited on poly carbonate (PC) and polyethersulfone(PES) and glass substrates at room temperature by facing targets sputtering (FTS). Two different kinds of targets were installed on FTS system. One is ITO ($In_2O_3$ 90 wt.%, $SnO_2$ 10 wt.%), the other is IZO ($In_2O_3$ 90 wt.%, ZnO 10 wt.%). As-deposited IZTO thin films were investigated by a UV/VIS spectrometer, an X-ray diffractometer (XRD), an atomic force microscope (AFM) and a Hall Effect measurement system. As a result, we could prepare the IZTO thin films with the resistivity of under $10^{-4}\;[{\Omega}{\cdot}cm]$ and IZTO thin films deposited on glass substrate showed an average transmittance over 80% in visible range (400~800 nm) in all IZTO thin films except in IZTO thin film deposited at $O_2$ gas flow rate of 0.1[sccm].

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.525-531
• /
• 2000

Sb-doped tin oxide films were deposited on Cornig glass 1737 substrate by plasma enhanced chemical vapor deposition (PECVD) technique. The films deposited at different reaction parameters were then examined by using XRD and AFM. The relatively good crystalline thin film was formed at $450^{\circ}C$, input gas ratio R[$P_{SbCl}P_{{SnCl}_4}$]=1.12 and r.f. power 30W. The surface roughness of the film formed by PECVD compared to TCVD was more smooth. Higher concentration of Sb dopant, lower deposition temperature, and thinner thickness of deposited film led to de-creasing surface roughness of the formed thin films.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1045-1049
• /
• 1995

Thin films of Indium tin oxie (ITO) were prepared by the process of metal organic decomposition. Light transmittance and electrical transport properties of the films were studied with varying the firing temperature and SnO$_2$content. XRD study showed that tin substituted indium in the In$_2$O$_3$lattice. The resistivity had the minimum value of 2.5 ${\times}$ 10$\^$-3/$\Omega$-cm when the content of SnO$_2$was 9wt.%. This value was higher by a factor of 10 than the previously reported results. This difference was attributed to the low mobilities presumably caused by the fine grain size. The transmittance of ITO films in the visible range was over 90%, and the optical energy gap calculated from the absorption edge was in the range of 4.51 and 4.96eV.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.434-436
• /
• 2013

Ga-doped ZnO (GZO) was substitutes of the SnO2:F films on soda lime glass substrate in the photovoltaic devices such as CIGS, CdTe and DSSC due to good properties and low cost. However, it was reported that the electrical resistivity of GZO is unstable above $300^{\circ}C$ in air atmosphere. To improve thermal stability of GZO thin films at high temperature above $300^{\circ}C$ an $TiO_2$ thin film was deposited on the top of GZO thin films as a barrier layer by Pulsed Laser Deposition (PLD) method. $TiO_2$ thin films were deposited at various thicknesses from 25 nm to 100 nm. Subsequently, these films were annealed at temperature of $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ in air atmosphere for 20 min. The XRD measurement results showed all the films had a preferentially oriented ( 0 0 2 ) peak, and the intensity of ( 0 0 2 ) peak nearly did not change both GZO (300 nm) single layer and $TiO_2$ (50 nm)/GZO (300 nm) double layer. The resistivity of GZO (300 nm) single layer increased from $7.6{\times}10^{-4}{\Omega}m$ (RT) to $7.7{\times}10^{-2}{\Omega}m$ ($500^{\circ}C$). However, in the case of the $TiO_2$ (50 nm)/GZO (300 nm) double layer, resistivity showed small change from $7.9{\times}10^{-4}{\Omega}m$ (RT) to $5.2{\times}10^{-3}{\Omega}m$ ($500^{\circ}C$). Meanwhile, the average transmittance of all the films exceeded 80% in the visible spectrum, which suggests that these films will be suitable for photovoltaic devices.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.110-110
• /
• 2006

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.156.1-156
• /
• 2000

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.135-135
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.144-145
• /
• 1998