• 제목/요약/키워드: Sn nanoparticle

검색결과 42건 처리시간 0.019초

나노입자가 알테미아(Artemia sp.) Cyst 부화율에 미치는 영향 (Effect of Nano Particles on the Hathcing rate of Artemia sp. Cyst Zooplankton)

  • 정연규;이병우;박찬일;최광수;김무찬
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제12권4호
    • /
    • pp.302-306
    • /
    • 2009
  • 이 연구에 사용된 9종류의 나노입자는 직경 100 nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius로 부화하였다. 20 mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 점차 영향을 줄 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

  • PDF

알테미아(Artemia sp.) Cyst 부화율에 미치는 나노입자의 영향 (Effect of Nano Particles on the Hathcing rate of Artemia sp. Cyst)

  • 이병우;조상만;박찬일;정우건;김무찬
    • 해양환경안전학회:학술대회논문집
    • /
    • 해양환경안전학회 2008년도 춘계학술발표회
    • /
    • pp.137-141
    • /
    • 2008
  • 이 연구에 사용된 9종류의 나노입자는 직경 100nm 이하의 크기를 가진 입자로, 알테미아 cyst가 nauplius로 부화되는 과정에서 어떠한 영향을 미치는지 살펴보았다. 24시간 경과 후 나노입자를 첨가하지 않은 대조구에서는 82%가 nauplius의 부화하였다. 20mg/L 농도에서는 AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자가 각각 18%, 20%, 13%, 50% 및 0%의 부화율을 보여 유해성이 큰 것으로 나타났으나, Ag-$TiO_2$, In, Sn, 및 Zn 나노입자에서는 각각 75%, 60%, 73% 및 73%로 대조구에 비해 유해성을 가졌지만, AGZ020, Nano silver, P-25, Sb, 및 SnO 나노입자에 비해 상대적으로 미약한 것으로 나타났다. 이는 나노입자가 가지고 있는 성분에 따라서 차이가 났다. AGZ020, Nano silver 및 P-25 나노입자는 은(Ag)이 2% 함유되어 항균제로서 널리 사용되어지고 있으며, 산소를 결합시킨 SnO 나노입자는 광촉매제로 사용되고 있다. 이들 나노입자들은 현재 가전, 기능성 화장품, 항균제 및 광촉매제 등 사용이 일반화되어 수중환경으로 유입될 가능성이 높아지고 있다. 이에 따라 수중생태계에 전파 영향을 준 가능성이 높기에, 나노입자가 가지는 잠재적 위험성을 지속적으로 연구해야 할 것이다.

  • PDF

나노 가스 감지 소자의 특성에 미치는 촉매 구조의 영향 (Elect of Catalytic Configuration on Sensing Properties of Nano Gas Sensor)

  • 홍성제;;한정인
    • 한국전기전자재료학회논문지
    • /
    • 제18권10호
    • /
    • pp.917-923
    • /
    • 2005
  • In this paper, effect of catalytic configuration on the sensing properties of $SnO_2$ nanoparticle gas sensitive thick film was investigated. Two types of catalytic configuration, mono and binary, were made on the $SnO_2$ nanoparticle. In case of mono catalytic system, $3 wt\%$ Pd or Pt catalyst was doped onto the $SnO_2$ nanoparticle, respectively. In case of binary catalytic system, Pd and Pt was doped simultaneously with concentration ratio of 1:2 to 2:1 onto the $SnO_2$ nanoparticle. After doping, gas sensitive thick film was printed on alumina substrate and heat-treated at 450 to $600^{\circ}C$. Gas sensing properties was evaluated using 500 to 10,000 ppm $CH_4$ gas. As a result, gas sensitive thick film with binary catalytic system showed unstable phenomena that the gas sensitivity was changed according to aging time. In contrary, the mono catalytic system showed relatively stable phenomena despite of aging time. Especially, gas sensitive thick film doped with $3 wt\%$ Pt catalyst and heat-treated at $500^{\circ}C$ showed good sensing properties such as 0.57 of $R_{3500}/R_{1000}$ and very small variation within $3.5\%$ after aging for 5 hours, and response time was very short less than 20 seconds.

Ru Nanoparticle이 첨가된 Sn-58Bi 솔더의 기계적 신뢰성 및 계면반응에 관한 연구 (Mechanical Properties and Interfacial Reactions of Ru Nanoparticles Added Sn-58Bi Solder Joints)

  • 김병우;최혁기;전혜원;이도영;손윤철
    • 마이크로전자및패키징학회지
    • /
    • 제28권2호
    • /
    • pp.95-103
    • /
    • 2021
  • 대표적인 저온솔더인 Sn-58Bi에 Ru nanoparticles을 첨가하여 Sn-58Bi-xRu 복합솔더를 제작하고 Cu/OSP 및 ENIG 표면처리된 PCB 기판과 반응시켜 계면반응 및 솔더조인트 신뢰성을 분석하였다. Cu/OSP와의 반응에서 형성된 Cu6Sn5 IMC는 Ru 함량에 따른 두께 변화가 거의 없고 100hr aging 후에도 큰 변화없이 고속 전단시험시 솔더 내부로 연성파괴가 발생하였다. ENIG 와의 반응시에는 Ru 함량이 증가함에 따라서 Ni3Sn4 IMC 두께가 감소하는 경향을 보였으며 일부 시편에서 ENIG 특유의 취성파괴 현상이 발견되었다. Ru 원소는 계면 부근에서 발견되지 않아서 계면반응에 크게 관여하지 않는 것으로 판단되며 주로 Bi phase와 함께 존재하는 것으로 분석되고 있는데 어떠한 형태로 두 원소가 공존하고 있는지에 대해서는 추가적인 연구가 필요하다.

Electrochemical Characteristics of Indium Tin Oxide Nanoparticles prepared by Sol-gel Combustion Hybrid Method

  • Chaoumead, Accarat;Choi, Woo-Jin;Lee, Dong-Hoon;Sung, Youl-Moon
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권3호
    • /
    • pp.414-417
    • /
    • 2011
  • Indium tin oxide (In:$SnO_2$) nanoparticles were synthesized employing a sol-gel combustion method followed by annealing. The TG, XRD, XPS and SEM results of the precursor powders and calcinated In:$SnO_2$ nanoparticles were investigated. Crystal structures were examined by powder XRD, and those results show shaper intensity peak at $25.6^{\circ}$ ($2{\theta}$) of $SnO_2$ by increased annealing temperature. A particle morphology and size was examined by SEM, and the size of the nanoparticles was found to be in the range of 20~30nm. In:$SnO_2$ films could controlled by nanoparticle material at various annealing temperature. The sol-gel combustion method was offered simple and effective route for the synthesis of In:$SnO_2$ nanoparticles.

Tip sonication을 이용한 SnO2 마이크로 입자 표면 개질 및 Ti 나노 입자 장식을 통한 H2S 가스 감지 특성 향상 (Improve H2S Gas Sensing Characteristics through SnO2 Microparticle Surface Modification and Ti Nanoparticle Decoration using Tip Sonication)

  • 신지연;김찬규;박지명;홍능레;황정윤;최명식
    • 센서학회지
    • /
    • 제33권2호
    • /
    • pp.105-111
    • /
    • 2024
  • In this study, the H2S gas sensing characteristics were evaluated using surface-modified SnO2 microparticles by tip sonication. The surface-modified SnO2 microparticles were synthesized using the following sequential process. First, bare SnO2 microparticles were synthesized via a hydrothermal method. Then, the surfaces of bare SnO2 microparticles were modified with Ti nanoparticles during tip sonication. The sensing characteristics of SnO2 microparticles modified with Ti were systematically investigated in the range of 100-300℃, compared with the bare SnO2 microparticles. In this study, we discuss in detail the improved H2S sensing characteristics of SnO2 microparticles via Ti nanoparticle modification.

Au/SnO2 core-shell 나노구조 센서의 구동온도가 CO 감동에 미치는 영향 (Effect of Working Temperature on Sensitivity of Au/SnO2 Core-Shell Structure Nanoparticles for CO Gas)

  • 유연태
    • 센서학회지
    • /
    • 제21권6호
    • /
    • pp.456-460
    • /
    • 2012
  • Au/$SnO_2$ core-shell structure nanoparticles (NPs) were synthesized by microwave hydrothermal method, and the effect of working temperature on sensitivity of Au/$SnO_2$ core-shell NPs for CO gas was investigated. The $SnO_2$ shell layer was consisted of $SnO_2$ primary particles with 4.5 nm diameter. The response of Au/$SnO_2$ core-shell NPs for CO gas was maximized at the working temperature of $350^{\circ}C$ while the sensitivity increased with decreasing the working temperature due to the low grain size effect of $SnO_2$ NPs on the response of CO gas.

Hydrothermal Synthesis of Indium Tin Oxide Nanoparticles without Chlorine Contamination

  • Wang, Hai Wen;Xu, Guo Dong;Zhang, Jian Rong;Yin, Xin
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권7호
    • /
    • pp.1999-2003
    • /
    • 2014
  • Indium tin oxide ($In_2Sn_{1-x}O_{5-y}$) nanoparticles were synthesized by hydrothermal method from stable indium tin acetylacetone complexes and postannealing at $600^{\circ}C$. The absence of chlorine ions shortened the synthesis process, decreased the particle agglomeration and improved the particle purity. The introduced complexing ligand acetylacetone decreased the obtained nanoparticle size. The improved powder properties accelerated the sintering of the $In_2Sn_{1-x}O_{5-y}$ nanoparticles and reached a relative density of 96.4% when pressureless sintered at $1400^{\circ}C$.

PL and TL behaviors of Ag-doped SnO2 nanoparticles: effects of thermal annealing and Ag concentration

  • Zeferino, R. Sanchez;Pal, U.;Melendrez, R;Flores, M. Barboza
    • Advances in nano research
    • /
    • 제1권4호
    • /
    • pp.193-202
    • /
    • 2013
  • In this article, we present the effects of Ag doping and after-growth thermal annealing on the photoluminescence (PL) and thermoluminescence (TL) behaviors of $SnO_2$ nanoparticles. $SnO_2$ nanoparticles of 4-7 nm size range containing different Ag contents were synthesized by hydrothermal process. It has been observed that the after-growth thermal annealing process enhances the crystallite size and stabilizes the TL emissions of $SnO_2$ nanostructures. Incorporated Ag probably occupies the interstitial sites of the $SnO_2$ lattice, affecting drastically their emission behaviors on thermal annealing. Both the TL response and dose-linearity of the $SnO_2$ nanoparticles improve on 1.0% Ag doping, and subsequent thermal annealing. However, a higher Ag content causes the formation of Ag clusters, reducing both the TL and PL responses of the nanoparticles.