• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.685-691
• /
• 2020

In this study, an algorithm that recognizes numbers from 0 to 9 was developed using the data obtained after tracking hand movements using the echo signal of a millimeter-wave radar sensor at 77 GHz. The echo signals obtained from the radar sensor by detecting the motion of a hand gesture revealed a cluster of irregular dots due to the difference in scattering cross-sectional area. A valid center point was obtained from them by applying a K-Means algorithm using 3D coordinate values. In addition, the obtained center points were connected to produce a numeric image. The recognition rate was compared by inputting the obtained image and an image similar to human handwriting by applying the smoothing technique to a CNN (Convolutional Neural Network) model trained with MNIST (Modified National Institute of Standards and Technology database). The experiment was conducted in two ways. First, in the recognition experiments using images with and without smoothing, average recognition rates of 77.0% and 81.0% were obtained, respectively. In the experiment of the CNN model with augmentation of learning data, a recognition rate of 97.5% and 99.0% on average was obtained in the recognition experiment using the image with and without smoothing technique, respectively. This study can be applied to various non-contact recognition technologies using radar sensors.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.378-385
• /
• 2005

Mistaking normal packets for harmful traffic may not offer service in conformity with the intention of attacker with harmful traffic, because it is not easy to classify network traffic for normal service and it for DDoS(Distributed Denial of Service) attack. And in the IPv6 environment these researches on harmful traffic are weak. In this dissertation, hosts in the IPv6 environment are attacked by NETWOX and their attack traffic is monitored, then the statistical information of the traffic is obtained from MIB(Management Information Base) objects used in the IPv6. By adapting the ESM(Exponential Smoothing Method) to this information, a normal traffic boundary, i.e., a threshold is determined. Input traffic over the threshold is thought of as attack traffic.

• Smart Structures and Systems
• /
• v.30 no.3
• /
• pp.273-286
• /
• 2022

In recent years, vision-based monitoring has received great attention. However, structural identification using vision-based displacement measurements is far less established. Especially, simultaneous identification of structural systems and unknown excitation using vision-based displacement measurements is still a challenging task since the unknown excitations do not appear directly in the observation equations. Moreover, measurement accuracy deteriorates over a wider field of view by vision-based monitoring, so, only a portion of the structure is measured instead of targeting a whole structure when using monocular vision. In this paper, the identification of structural system and excitations using vision-based displacement measurements is investigated. It is based on substructure identification approach to treat of problem of limited field of view of vision-based monitoring. For the identification of a target substructure, substructure interaction forces are treated as unknown inputs. A smoothing extended Kalman filter with unknown inputs without direct feedthrough is proposed for the simultaneous identification of substructure and unknown inputs using vision-based displacement measurements. The smoothing makes the identification robust to measurement noises. The proposed algorithm is first validated by the identification of a three-span continuous beam bridge under an impact load. Then, it is investigated by the more difficult identification of a frame and unknown wind excitation. Both examples validate the good performances of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.680-685
• /
• 2009

In this paper, we propose a efficient noise power estimation technique for an integrated acoustic echo and noise suppression system in a frequency domain. The proposed method uses speech absence probability (SAP) derived from the microphone input signal as the smoothing parameter updating noise power to reduce the noise power estimation error resulted from the distortions in the unified structure where the noise suppression (NS) operation is placed after the acoustic echo suppression (AES) algorithm. Therefore, in the proposed approach, the smoothing parameter based on SAP derived from the input signal instead of echo-suppressed signal should stop updating noise power estimates during the distorted noise spectrum periods. The performance of the proposed algorithm is evaluated by the objective test under various environments and yields better results compared with the conventional scheme.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.555-563
• /
• 2018

Thermal infrared images have the characteristic of being able to detect objects that can not be seen with the naked eye and have the advantage of easily obtaining information of inaccessible areas. However, TIR (Thermal InfraRed) images have a relatively low spatial resolution. In this study, the applicability of the pansharpening algorithm used for satellite imagery on images acquired by the UAV (Unmanned Aerial Vehicle) was tested. RGB image have higher spatial resolution than TIR images. In this study, pansharpening algorithm was applied to TIR image to create the images which have similar spatial resolution as RGB images and have temperature information in it. Experimental results show that the pansharpening algorithm using the PC1 band and the average of RGB band shows better results for the quantitative evaluation than the other bands, and it has been confirmed that pansharpening results by ATWT (${\grave{A}}$ Trous Wavelet Transform) exhibit superior spectral resolution and spatial resolution than those by HPF (High-Pass Filter) and SFIM (Smoothing Filter-based Intensity Modulation) pansharpening algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2636-2640
• /
• 2003

KARI had developed an Local Area Augmentation System for aircraft precision landing as following ICAO SARPs(Standards and Recommended Practices) draft and FAA's recommended algorithm( carrier smoothing techniques). JPO in charge of managing GPS has introduced the signal structure of GPS modernization program. This paper estimates the accuracy performance of KARI-LAAS with modernized GPS signal but the same processing algorithm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.221-224
• /
• 1998

간섭신호가 원하는 신호에 coherent한 경우에는 원하는 신호와 간섭신호간의 cross correlation에 의해 공분산 행렬의 rank가 줄어들게 되어 coherent한 간섭신호의 도래각을 추정할 수 없게 된다. 이러한 문제를 해결하기 위해 발표된 기존의 방법중 대칭 어레이(Symmetric array)방법은 계산량이 많아지고 공간 스무딩(Spatial Smoothing)방법은 array aperture size에서 손해를 보게 되어 분해능이 떨어지는 단점이 있다[1,2,3].

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.133-137
• /
• 2000

In this paper, We study on converting data transfer using Image processing method. In the program's code consist of outline trace, noise filtering methode, pont data smoothing, algorithm. We use those Algorithm to create Vectorized data file format from image data. This result can be utilized as a base part for development of Automatic recognition for mechanical drawings.

• 전기의세계
• /
• v.31 no.5
• /
• pp.368-374
• /
• 1982

This paper describes a combined algorithm for short-term-load forecating. One of the specific features of this algorithm is that the base, weather sensitive and residual components are predicted respectively. The base load is represented by the exponential smoothing approach and residual load is represented by the Box-Jenkins methodology. The weather sensitive load models are developed according to the information of temperature and discomfort index. This method was applied to Korea Electric Company and results for test periods up to three years are given.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1935-1937
• /
• 2001

In this paper, the position determination problem for geometry PIG is considered. The PIG system is a device to examine the gas pipeline condition and detect the accurate position of dent or any undesirable state. In order to determine the position, the smoothing algorithm has been used and its performance anyalsis has been done by Monte Carlo simulation technigue.