• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.115-125
• /
• 2016

The Bollinger Band indicating the current price position in the recent price action range is obtained by adding/substracting the simple standard deviation (SSD) to/from the simple moving average (SMA). In this paper, we first compare the characteristics of the SMA and the exponential moving average (EMA) in the operator's point of view. A basic equation is obtained between the interval length N of the SMA operator and the weighting factor ${\rho}$ of the EMA operator, that makes the centers of the 1st order momentums of each operator impulse respoinse identical. For equivalent N and ${\rho}$, frequency response examples are obtained and compared by using the discrete time Fourier transform. Based on observation that the SMA operator reacts more excessively than the EMA operator, we propose a novel exponential standard deviation (ESD) band centered at the EMA and derive an auto recursive formula for the proposed ESD band. Practical examples for the ESD band show that it has a smoother bound on the price action range than the Bollinger Band. Comparisons are also made for the gap corrected chart to show the advantageous feature of the ESD band even in the case of gap occurrence. Trading techniques developed for the Bollinger Band can be straight forwardly applied to those for the ESD band.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.357-366
• /
• 2021

Shear behavior dependent on the shape and roughness of rock joints can greatly influence the stability of the ground and rock structures. The efficient design of rock structures requires understanding of the shear behavior due to joints and accurate calculation of the shear strength. This work reports numerical shear tests using PFC2D on No. 1 (JCR-1), with smooth joints, and No. 7 (JRC-7) and No. 9 (JRC-9), with relatively rough joints, for the 10 shapes of standard joint profiles proposed by Barton and Choubey (1977). The aim was to investigate the shear behavior of rock joints with respect to their roughness. The results show the maximum shear stress to be about 3.2 to 5.0 times greater in the rougher JRC-7 and JRC-9 joints than in smoother JRC-1. The maximum shear displacement was approximately 4.1 to 5.8 times greater at the first normal stress than at the second. The rougher joints showed friction angles of the rock joints that were approximately 1.8 to 3.9 times greater than that in the smooth joint. Overall, increasing the rock joint roughness increased the maximum shear stress and friction angle.

• Journal of Environmental Science International
• /
• v.27 no.11
• /
• pp.1029-1048
• /
• 2018

In this study, seasonal Mann - Kendall test method was applied to 12 stations of the water quality measurement network of Nam-River based on data of BOD, COD, TN and TP for 11 years from January 2005 to December 2015 The changes of water quality at each station were examined through linear trends and the tendency of water quality change during the study period was analyzed by applying the locally weighted scatter plot smoother (LOWESS) method. In addition, spatial trends of the whole Nam-River were examined by items. The flow-adjusted seasonal Kendall test was performed to remove the flow at the water quality measurement station. As a result, BOD, COD concentration showed "no trand" and TN and TP concentration showed "down trand" in regional Kendall test throughout the study period. BOD and TP concentration in "no trand", COD, and TN concentration showed an "up trand" tendency in Nam-River dam. LOWESS analysis showed no significant water quality change in most of the analysis items and stations, but water quality fluctuation characteristics were shown at some stations such as NR1 (Kyungho-River 1), NR2 (Kyungho-River 2), NR3 (Nam-River), NR6 (Nam-River 2A). In addition, the flow-adjusted seasonal Kendall results showed that the BOD concentration was "up trand" due to the flow at the NR3 (Nam-River) station. The COD concentration was "up trand" due to the flow at NR1 (Kyungho-River 1) and NR2 (Kyungho-River 2) located upstream of the Nam-River. The effect of influent flow on water quality varies according to each site and analysis item. Therefore, for the effective water quality management in the Nam-River, it is necessary to take measures to improve the water quality at the point where the water quality is continuously "up trand" during the study period.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.30-43
• /
• 2017

The purpose of this study is to improve the usefulness of photogrammetry in the field of cultural heritage recording concentrated on laser scanning. Two measurement methods(laser scanning, photogrammetry) were compared in terms of accuracy and reality for the Rock-carved Standing Buddha in Singyeong-ri, Hongseong. With regard to accuracy, the distances of major points by both shape information and between the two shape information were compared. Only a deviation of about 1mm was found in the distance measurement of the major points by both shape information. In particular, the average distance between two shape information identified through aligning was only about 0.01mm. Also, the absolute deviation within about 2mm accounted for 70% of the total, and the absolute deviation within about 3.5mm was found to be 95.4% of the total. These values showed very high similarity between laser scanning and photogrammetry-based shape information. In respect of reality, the carved depth, texture, and patterns were compared. As a result of comparing four cross-sectional shapes, only slight differences were found in the shape information of both measurement techniques and similar shapes were identified. The overall texture of both shape information was also similar. However, the detailed shape based on the photogrammetry with decimation is realized with a smoother texture than the original and laser scanning. In particular, Photogrammetry also realistically expressed the various ornaments carved in the Rock-carved Buddha and the patterns with shallow depths were comparatively detailed.

• Plant Breeding and Biotechnology
• /
• v.5 no.4
• /
• pp.334-343
• /
• 2017

Eclipta prostrata and E. alba are annual herbal medicinal plants and have been used as Chinese medicinal tonics. Both species are widely distributed in tropical and subtropical regions as well as in Korea. Both species have similar morphological features but E. alba has smoother leaf blade margins compared with E. prostrata. Although both species are utilized as oriental medicines, E. prostrata is more widely used than E. alba. Morphological semblances have confounded identification of either species. Here, we report the complete chloroplast genomes of both species to provide an authentication system between the two species and understand their diversity. Both chloroplast genomes were 151,733-151,757 bp long and composed of a large single copy (83,285-83,300 bp), a small single copy (18,283-18,346 bp), and a pair of inverted repeats (25,075-25,063 bp). Gene annotation revealed 80 protein coding genes, 30 tRNA genes and four rRNA genes. A phylogenetic analysis revealed that the genus Eclipta is grouped with Heliantheae tribe species in the Asteraceae family. A comparative analysis verified 29 InDels and 58 SNPs between chloroplast genomes of E. prostrata and E. alba. The low chloroplast genome sequence diversity indicates that both species are really close to each other and are not completely diverged yet. We developed six DNA markers that distinguish E. prostrata and E. alba based on the polymorphisms of chloroplast genomes between E. prostrata and E. alba. The chloroplast genome sequences and the molecular markers generated in this study will be useful for further research of Eclipta species and accurate classification of medicinal herbs.

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.53-59
• /
• 2022

After the 3rd level autonomous driving vehicle, the 4th and 5th level of autonomous driving technology is trying to maintain the optimal condition of the passengers as well as the perfect driving of the vehicle. However current autonomous driving technology is too dependent on visual information such as LiDAR and front camera, so it is difficult to fully autonomously drive on roads other than designated roads. Therefore this paper proposes a Braking Strength Calculation System (BSCS), in which a vehicle classifies road conditions using data other than visual information and calculates optimal braking strength according to road conditions and driving conditions. The BSCS consists of RCDM (Road Condition Definition Module), which classifies road conditions based on KNN algorithm, and BSCM (Braking Strength Calculation Module), which calculates optimal braking strength while driving based on current driving conditions and road conditions. As a result of the experiment in this paper, it was possible to find the most suitable number of Ks for the KNN algorithm, and it was proved that the RCDM proposed in this paper is more accurate than the unsupervised K-means algorithm. By using not only visual information but also vibration data applied to the suspension, the BSCS of the paper can make the braking of autonomous vehicles smoother in various environments where visual information is limited.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.29-38
• /
• 2023

Background: The purpose of this study was to investigate the effect of salad dressings on the flowable composite resin surface and the erosion-inhibitory effect of calcium. Methods: The experiment included six groups: oriental dressing, balsamic dressing, lemon-garlic dressing, lemon-garlic dressing supplemented with 3% calcium, mineral water as a negative control group, and orange juice as a positive control group. pH and titratable acidity were measured. The prepared specimens were immersed in the experimental solutions for 1, 3, 5, 15, and 30 minutes. The surface microhardness was measured using the Vickers hardness number before and after the treatment, and the surface of the specimens was observed using a scanning electron microscope (SEM). Results: The pH values of the experimental groups in increasing order were as follows: lemon-garlic dressing (2.49±0.03), balsamic dressing (3.12±0.06), lemon-garlic dressing +3% calcium (3.27±0.09), oriental dressing (3.75±0.03), orange juice (3.82±0.02), and mineral water (7.32±0.16). The largest surface hardness reduction value was shown in lemon-garlic dressing (-9.61±1.16), followed by balsamic dressing (-9.17±1.63), oriental dressing (-8.62±1.09), orange juice (-8.19±1.36), lemon-garlic dressing +3% calcium (-6.76±1.23), and mineral water (-1.63±2.47). According to the SEM findings, the experimental and positive control groups showed rough surfaces and micropores, whereas the negative control group showed a smooth surface. Moreover, the lemon-garlic dressing with +3% calcium showed fewer micropores and a smoother surface than the lemon-garlic dressing. Conclusion: The intake of salad dressings at a low pH could weaken the surface microhardness of the flowable composite resin. However, adding calcium to these salad dressings can reduce the risk of microhardness reduction on the flowable composite resin surface.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.5
• /
• pp.615-624
• /
• 2010

This study was conducted to investigate the use of sugar alcohols as alternative sweeteners for replacing sucrose in sponge cake. The sponge cakes were prepared with only sucrose or a 50% replacement of sucrose with various sugar alcohols (erythritol, sorbitol, and xylitol). The specific gravity of cake batter containing only sucrose was significantly higher and the viscosity was significantly lower than those containing sugar alcohol (p<0.001). Among sugar alcohols, xylitol was the most similar to sucrose. The thermal characteristics, as assessed by differential scanning calorimetry, showed that sucrose delayed gelatinization of cake batter more than sugar alcohol, as the onset temperature and the peak temperature of cake batter containing only sucrose were higher than those containing sugar alcohol. The moisture content of cake containing sorbitol was the highest and that containing only sucrose was the lowest among cakes. The specific volume of cakes containing only sucrose and xylitol were higher and the baking loss rate of those were lower than other sugar alcohols. The volume and symmetry index of cake containing only sucrose were the highest among cakes (p<0.001), and xylitol was similar to sucrose for the above indices. The redness (a) and yellowness (b) values of crust containing only sucrose were significantly higher than those containing sugar alcohols (p<0.001). The a and b values of crumb containing erythritol were the lowest among cakes, showing a pale yellowish color. The microstructure, as assessed by scanning electron microscopy, showed that the cake containing only sucrose had more uniformly and finely distributed pores and a smoother cross section than that containing sugar alcohols. Cake containing xylitol was similar to cake containing only sucrose. Hardness, chewiness, and gumminess of cake containing only sucrose were higher than those containing sugar alcohols, whereas the adhesiveness of cakes containing sugar alcohols were higher than those containing only sucrose (p<0.01). Among sugar alcohols, xylitol was the most similar to sucrose in textural properties. In a sensory quality test, the tenderness and moistness of cakes containing sorbitol and erythritol were higher than those containing only sucrose and xylitol. The overall acceptance of cakes containing xylitol and only sucrose were higher than those containing sorbitol and erythritol (p<0.001). Thus, xylitol is more appropriate as a 50% replacement for sucrose than erythritol and sorbitol when preparing sponge cake.

• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.123-129
• /
• 2023

This study was intended to discuss the economic exclusion of the elderly, which may be experienced in a super-aged society, and to propose a method to improve the interpersonal satisfaction of the elderly through the expansion of social networks in order to overcome this. As a result of this study, first, it suggests that the method of overcoming economic exclusion and improving human satisfaction requires a high interest in women in the subject, and the elderly, low-educated, It was found that it is urgent to overcome the economic exclusion of the low-income class. Second, as a result of examining the effect of social network on human relationship satisfaction, it was found that the more women, the higher the age, the more shopping, and the smoother communication with children, the higher the human relationship satisfaction. Third, as a result of examining the effect of economic exclusion on human relationship satisfaction, it was found that the more leisure activities visited relatives and relatives, and the more paid facilities used social networks, the lower the relationship satisfaction. Therefore, it can be seen that improvement measures for leisure activities and social networks are required. Fourth, as a result of examining the mediating effect of the social network, the social exclusion in the causal relationship in which the independent variable economic exclusion affects the dependent variable, human relationship satisfaction, The relational network was found to have a complete mediating effect. In conclusion, economic exclusion and social network affect human relationship satisfaction, and it was found that human relationship satisfaction improved only when economic exclusion was overcome and social network was improved.

• Journal of the Korean Society of Radiology
• /
• v.83 no.6
• /
• pp.1259-1272
• /
• 2022

Purpose As part of ongoing efforts to improve the current e-learning center, a survey was conducted regarding user experience and satisfaction to identify areas of improvement. Materials and Methods Radiologists (n = 454/617) and radiology residents (n = 163/617) of the Korean Society of Radiology were asked to answer a survey via email. The questionnaire asked for basic user information as well as user experiences relating to the e-learning center, such as workplace, frequency of use, overall satisfaction levels, reasons for satisfaction or dissatisfaction, and other suggestions for improvement. Results Annual members and all members of the e-learning center reported above average satisfaction levels of 67% and 42%, respectively. Approximately 30% of respondents viewed e-learning center lectures more than 5 times a month, with residents having a particularly high usage frequency. There was a high demand for additional lectures covering more diverse specialties (e-learning for annual members only: n = 28/97, e-learning for all members: n = 72/166), a smoother and more convenient searching platform/interface (n = 37/97 and n = 58/166, respectively), and regular content updates. In addition, many of the members suggested the addition of user-friendly functions such as playback speed control, a way to save viewing history, as well as requests for improved system stability. Conclusion Based on survey results, the educational committee plans to continue its efforts to improve the e-learning center by increasing the quality and quantity of available lectures, and increasing technical support to improve the stability and convenience of the e-learning digital system.