• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1
• /
• pp.14-23
• /
• 1994

In this paper, speech units appropriate for recognition of Korean language have been studied. For better speech recognition, co-articulatory effects within an utterance should be considered in the selection of a recognition unit. One way to model such effects is to use larger units of speech. It has been found that diphone is a good recognition unit because it can model transitional legions explicitly. When diphone is used, stationary phoneme models may be inserted between diphones. Computer simulation for isolated word recognition was done with 7 word database spoken by seven male speakers. Best performance was obtained when transition regions between phonemes were modeled by two-state HMM's and stationary phoneme regions by one-state HMM's excluding /b/, /d/, and /g/. By merging rarely occurring diphone units, the recognition rate was increased from $93.98\%$ to $96.29\%$. In addition, a local interpolation technique was used to smooth a poorly-modeled HMM with a well-trained HMM. With this technique we could get the recognition rate of $97.22\%$ after merging some diphone units.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.11-19
• /
• 1994

Hidden Markov Models (HMM's) with explicit state duration density (HMM/SD) can represent the time-varying characteristics of speech signals more accurately. However, such an advantage is reduced in relatively smooth state duration densities or ling bounded duration. To solve this problem, we propose HMM's with global path constraint (HMM/GPC) where the transition between states occur only within prescribed time slots. HMM/GPC explicitly limits state durations and accurately describes the temproal structure of speech simply and efficiently. HMM's formed by combining HMM/GPC with HMM/SD are also presented (HMM/SD+GPC) and performances are compared. HMM/GPC can be implemented with slight modifications to the conventional Viterbi algorithm. HMM/GPC and HMM/SD_GPC not only show superior performance than the conventional HMM and HMM/SD but also require much less computation. In the speaket independent isolated word recognition experiments, the minimum recognition eror rate of HMM/GPC(1.6%) is 1.1% lower than the conventional HMM's and the required computation decreased about 57%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.131-142
• /
• 1994

This paper analyzes the properties of such algorithm that corresponds to the nonlinear adaptive algorithm with additional update terns, parameterized by the scalar factors ${\alpha}1,\;and\;{\alpha}2$. The analysis of concergence leads to eigenvalues of the transition matrix for the mean filter coefficient vector. Regions in which the algorithm becomes stable are demonstrated. The time constant is derived and the computational complexity of the QFG algorithm is compared with those of the conventional LMS. sign, and LFG algorithm. The properties of convergence in the mean square error is derived and the neccessary condition for the CFG algorithm to be stable is attaned. In the computer simulation a channel equalization is utilized to demonstrate the performance feature of the QFG algorithm. The QFG algorithm has the more computational complexities but the faster convergence speed than LMS and LFG algorithm. Since the QFG algorithm has smoother convergence, it may be useful in case where error bursting is a problem.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.61-66
• /
• 1998

High quality c-axis oriented $YBa_{2}Cu_{3}O_{7}$ films were prepared using the pulsed laser deposition on $SrTiO_{3}$(100) substrate. The atomically smooth $SrTiO_{3}$surface with terraces one unit cell in height could be obtained by a high temperature annealing. $YBa_{2}Cu_{3}O_{7}$ thin films deposited on the substrates exhibited layer-by-layer growth with a c-axis unit cell height. $YBa_{2}Cu_{3}O_{7}$ thin films thus prepared showed critical temperature ${\ge}90$ K with transition width ${\le}0.6$ K, room temperature resistivity of ${\sim}300{\mu}{\Omega}cm$, and critical current density ${\sim}4.6{\times}10^{6}A/cm^{2}$ at 77 K.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2014

The friction behaviors of bulk amorphous thermal spray coating (BAC) and second phase-reinforced composite coatings using a high velocity oxy-fuel spraying process were investigated using a ball-on-disk test rig that slides against a ceramic ball in an atmospheric environment. The surface temperatures were measured using an infrared thermometer installed 50 mm from the contact surface. The crystallinities of the coating layers were determined using X-ray diffraction. The morphologies of the coating layers and worn surfaces were observed using a scanning electron microscope and energy-dispersive spectroscopy. The results show that the friction behavior of the monolithic amorphous coating was sensitive to the testing conditions. Under lower than normal loads, a low and stable friction coefficient of about 0.1 was observed, whereas under a higher relative load, a high and unstable friction coefficient of greater than 0.3 was obtained with an instant temperature increase. For the composite coatings, a sudden increase in friction coefficient did not occur, i.e., the transition region did not exist and during the friction test, a gradual increase occurred only after a significant delay. The BAC morphology observations indicate that viscous plastic flow was generated with low loads, but severe surface damage (i.e., tearing) occurred at high loads. For composite coatings, a relatively smooth surface was observed on the worn surface for all applied loads.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7C
• /
• pp.669-677
• /
• 2003

A new Modem technique - 8SQAM(8-state Superposed Quadrature Amplitude Modulation) - for use in power and bandwidth limited digital communication system is proposed. 8SQAM is free of inter-symbol interference(ISI) and generates output signals which have a smooth and continuous phase transition and a reduced envelope fluctuation by keeping correlation between amplitudes and phases of two subsequent symbols. Accordingly, 8SQAM, as compared with a conventional 8PSK, is influenced a little by ISI and inter-modulation(IM) caused by nonlinear distortions. In this paper, the performance of the 8SQAM system, in a nonlinearly amplified channel impaired by additive white Gaussian noise(AWGN), ISI and IM, is analyzed via computer simulation. The simulation result shows that 8SQAM outperforms 8PSK with roll-off value of $\alpha$=0.25 by 2.5dB in CNR to maintain BER=1$\times$10$^{-4}$ when input back-off(IBO) of HPA is 3dB.

• Safety and Health at Work
• /
• v.4 no.2
• /
• pp.117-121
• /
• 2013

This paper describes progress on formulating a national asbestos profile for the country of Vietnam. The Center of Asbestos Resource, Vietnam, formulated a National Profile on Asbestos-related Occupational Health, with due reference to the International Labor Organization/World Health Organization National Asbestos Profile. The Center of Asbestos Resource was established by the Vietnamese Health Environment Management Agency and the National Institute of Labor Protection, with the support of the Australian Agency for International Development, as a coordinating point for asbestos-related issues in Vietnam. Under the National Profile on Asbestos-related Occupational Health framework, the Center of Asbestos Resource succeeded in compiling relevant information for 15 of the 18 designated items outlined in the International Labor Organization/World Health Organization National Asbestos Profile, some overlaps of the information items notwithstanding. Today, Vietnam continues to import and use an average of more than 60,000 metric tons of raw asbestos per year. Information on asbestos-related diseases is limited, but the country has begun to diagnose mesothelioma cases, with the technical cooperation of Japan. As it stands, the National Profile on Asbestos-related Occupational Health needs further work and updating. However, we envisage that the National Profile on Asbestos-related Occupational Health will ultimately facilitate the smooth transition to an asbestos-free Vietnam.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.725-733
• /
• 1990

An analysis of laminar mixed convection flow adjacent to the inclined flat surface which is subjected to a uniform temperature in a uniform free stream is performed. Nonsimilar boundary layed equation are derived by using the mixed convection parameters such that smooth transition from the purely forced convection limit to the purely free convection limit is possible. The governing equations are solved by a finite difference method using the coupled box scheme of sixth order. Numerical results are presented for prandtl numbers of 0.7 and 7 with the angle of inclination ranging from 0 to 90 degree from the vertical. The velocity distributions for the buoyancy assisting flow exhibit a significant overshoot above the free stream value in the region of intense mixed convection and the velocity field is found to be more sensitive to the buoyancy effect than the temperature field. The separation point near the wall was obtained for the buoyancy opposing flow. The local Nusselt number increases for buoyancy assisting flow and decreases for opposing flow with increasing value of the local Grashoff number in the mixed convection parameter. For large Prandtl number, the Nusselt number and the friction factor decrease significantly near the separation point. Present numerical predictions are in good agreement with recent experimental results by Ramachandran.

• Atmosphere
• /
• v.20 no.2
• /
• pp.73-89
• /
• 2010

An updateable model output statistics (UMOS) system for daily maximum and minimum temperature ($T_M$ and $T_m$) over South Korea based on the Canadian UMOS system were developed and validated. RDAPS (regional data assimilation and prediction system) and KWRF (Korea WRF) which have quite different physics and dynamics were used for the development of UMOS system. The 20 most frequently selected potential predictors for each season, station, and forecast projection time from the 68 potential predictors of the MOS system, were used as potential predictors of the UMOS system. The UMOS equations were developed through the weighted blending of the new and old model data, with weights chosen to emphasize the new model data while including enough old model data to ensure stable equations and a smooth transition of dependency from the old model to the new model. The UMOS equations are being updated by every 7 days. The validation results of $T_M$ and $T_m$ showed that seasonal mean bias, RMSE, and correlation coefficients for the total forecast projection times are -0.41-0.17 K, 1.80-2.46 K, and 0.80-0.97, respectively. The performance is slightly better in autumn and winter than in spring and summer. Also the performance of UMOS system are clearly dependent on location, better at the coastal region than inland area. As in the MOS system, the performance of UMOS system is degraded as the forecast day increases.