• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1447-1453
• /
• 2008

In this paper, we proposed to improve performance of the design of a cascade controller with the smith-predictor structure. The parameters of controller in the inner loop are determined to minimize the integral of time multiplied by the absolute value of error (ITAE) value of performance Index. The controller of outer loop and parameters of Smith-Predictor can be obtain using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.3
• /
• pp.270-279
• /
• 2006

This study was designed to : (a) analyze the menus of the French restaurant in tourism hotel using the menu analysis techniques of Kasavana & Smith and Pavesic, (b) compare the characteristics of the two analysis techniques. The calculations for the menu analysis were done using the MS 2000 Excel spreadsheet program. The menu mix % and unit contribution margin were used as variables by Kasavana & Smith and weighted contribution margins (WCM) and potential food cost % (PFC%) by Pavesic. In two cases, a four-cell matrix was created and menu items were located in each according they achieved high or low scores with respect to two variables. The items that scored favorably on both variables were rated in the top category (e.g., star, prime) and those that scored below average on both were rated in the lowest category (e.g., dog, problem). While Kasavana & Smith's method focused on customer's viewpoints, Pavesic's method considered the manager's viewpoints. Therefore, it is more likely to be desirable for decision-making on menus if the menu analysis techniques chosen is suited to its purpose.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.3
• /
• pp.151-161
• /
• 2014

The purpose of this study is to analyze the characteristics of Men's Jacket design in Paul Smith. According to the Change of Gender Image. Following study comprehends gender images and the concept of man's jacket through series of collected data and observes the influence that sociocultural background had upon men's wear. A standard of contemporary men's jacket, the subject of this study, is established based on the review of literature. According to this specific standard, photos of men's jacket were obtained from Paul Smith men collection and from these data the characteristics of men's jacket were analyzed. The method of this following study was to establish a standard of data collection from review of literature and to gather 721 photos of men's jacket from Paul Smith, which consistently appeared in first view korea for 28 seasons from 2001 s/s collection to 2014 f/w collection. Design characteristics of collected data were categorized by shape, color, fabric. This study brought forth following results. Paul Smith's jacket had more X-shape silhouette of feminine image. Color was mostly low chroma of RB series, so that masculine images could be pointed out. Compared to other brands, from 2004 to 2006, more jackets with natural pattern and abstract pattern were widely seen. In terms of fabric, feminine fabrics with glossy and flexible characteristics were used.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.3
• /
• pp.129-136
• /
• 2007

In this paper, we suggest PI control with the Smith predictive controller to improve transient response of a variable speed refrigeration system (VSRS). As the refrigeration system has long dead time inherently, it is difficult to get fast responses of super-heat and reference temperature. We incorporated the Smith predictive controller into PI to compensate the effect of the long dead time of the system. At first, we introduced the decoupling model of the system to control capacity and superheat simultaneously and independently. Next, we designed the predictive controller of the superheat based on PI control law. Finally, the control performance by the proposed method was investigated through some numerical simulations and experiments. The results of the simulations and experiments showed that the proposed PI control with the predictive controller could obtain acceptable transient behaviour for the system.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.339-344
• /
• 2019

Global sequence alignment in search of similarity or homology favors larger size of the sequence because it keeps looking for more similar section between two sequences in the hope that it adds up scores for matched part in the rest of the sequence. If a substantial size of mismatched section exists in the middle of the sequence, it greatly reduces the total alignment score. In this case a whole sequence would be better to be divided into multiple sections. Overall alignment score over the multiple sections of the sequence would increase as compared to global alignment. This method is called multiple local alignment. In this paper, we implement a multiple local alignment algorithm, an extension of Smith-Waterman algorithm and show the experimental results for the algorithm that is able to search for sub-optimal sequence.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.65-68
• /
• 1997

溜is paper is concerned with the controllers for time-delay systems which has an integrator. It is known that high performance can be obtained for the systems response and load disturbance rejection by adjusting the only three parameters of the modified Smith predictor. In the case of the time-delay systems with repeated poles, good performance cannot be obtained with the modified Smith predictor. But superior performance can be obtained through the intentional delay parameters mismatch. The calculating method for the approximation delay parameter values is proposed. Simulation results show the improved response characteristics with the proposed delay parameter values.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.449-455
• /
• 2011

In this paper, a time-delay problem of a tele-operated control system is investigated and compensated by neural network. The smith predictor requires an exact system model to deal with a time-delay in the system. To compensate for modeling errors in the configuration of the Smith predictor, a neural network approach is presented. Based on forming the Smith predictor structure, the radial basis function(RBF) neural network estimator is used. Simulation and experimental studies are conducted to show the functionality of the proposed method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.2
• /
• pp.396-406
• /
• 2007

In this paper, we proposed development of improved model reduction and design of hierarchical controller using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. The hierarchical controller selected tuning of PID controller to ensure specified gain and phase margin and hybrid smith-predictor fuzzy controller using reduction model. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.28-35
• /
• 2024

Corrosion inside electronic packages significantly impacts the system performance and reliability, necessitating non-destructive diagnostic techniques for system health management. This study aims to present a non-destructive method for assessing corrosion in copper interconnects using the Smith chart, a tool that integrates the magnitude and phase of complex impedance for visualization. For the experiment, specimens simulating copper transmission lines were subjected to temperature and humidity cycles according to the MIL-STD-810G standard to induce corrosion. The corrosion level of the specimen was quantitatively assessed and labeled based on color changes in the R channel. S-parameters and Smith charts with progressing corrosion stages showed unique patterns corresponding to five levels of corrosion, confirming the effectiveness of the Smith chart as a tool for corrosion assessment. Furthermore, by employing data augmentation, 4,444 Smith charts representing various corrosion levels were obtained, and artificial intelligence models were trained to output the corrosion stages of copper interconnects based on the input Smith charts. Among image classification-specialized CNN and Transformer models, the ConvNeXt model achieved the highest diagnostic performance with an accuracy of 89.4%. When diagnosing the corrosion using the Smith chart, it is possible to perform a non-destructive evaluation using electronic signals. Additionally, by integrating and visualizing signal magnitude and phase information, it is expected to perform an intuitive and noise-robust diagnosis.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.64-77
• /
• 2018

This paper presents the prediction of the original gas in place(OGIP) by using the material balance method and decline curve analysis method with production history and pressure transient test data for four coalbed methane wells in the Horseshoe Canyon field. In this study, the conventional gas equation and the Jensen and Smith(J&S) equation were used to material balance analysis, and the Arps' empirical correlation and Khaled method were applied to decline curve analysis. From the results, the OGIP estimated from the conventional gas and the J&S method was small in difference as under 12%. Also, in case of decline curve analysis, it was found that the Khaled method has appropriated to calculate the OGIP, because the OGIP was estimated as unlimited value by the Arps' equation from the decline exponent of 1 - 3.5. The OGIP difference between conventional gas method and Khaled method was calculated as 8.67% ~ 31.04%, and those between J&S method and Khaled method was 13.67% ~ 26.49%.