• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1730-1734
• /
• 2005

본 논문에서는 입력측에 외란이 인가된 시간지연 시스템에 대한 새로운 스미스 예측제어기를 제안하였다. 외란을 검출할 수 있는 외란 관측기를 구성하였으며 이를 이용하여 외란의 영향을 소거할 수 있는 제어기를 구성하였다. 그 결과 계단입력 형태의 외란에 대한 정상상태 오차를 빠르게 0으로 할 수 있는 새로운 스미스 예측제어기를 구성할 수 있었다. 이렇게 구성된 제어기에 대하여 컴퓨터 시뮬레이션을 행하여 제안된 시스템의 효용성 및 우수성을 입증하였다.

• 제어로봇시스템학회논문지
• /
• 제13권5호
• /
• pp.444-451
• /
• 2007

In this paper, we propose an improved reduction model and a reduction model-based hybrid smith-predictor fuzzy controller. The transient and steady-state responsed of the reduction model was evaluated. In tuning the controller, the parameters of PID and the factors fuzzy controllers were obtained from the reduced model and by using genetic algorithms, respectively. Simulation examples demonstrated a better performance of the proposed controller than conventional ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2317-2319
• /
• 2000

This paper presents a feedback controller for compensation time delay in the distributed control systems. In using network, controllers and sensors are distributed on a communications network, there exist time delays on communication lines between the system components. So, we deal with the controller using Smith predictor controller design issue for such systems. Particularly compensated for the time delay of the plant or controller involved integrator using Modified Smith predictor. Simulation and the results show the good performance for the modified Smith predictor control systems.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1447-1453
• /
• 2008

In this paper, we proposed to improve performance of the design of a cascade controller with the smith-predictor structure. The parameters of controller in the inner loop are determined to minimize the integral of time multiplied by the absolute value of error (ITAE) value of performance Index. The controller of outer loop and parameters of Smith-Predictor can be obtain using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권11호
• /
• pp.619-625
• /
• 2003

We proposed an optimum PID controller design method of the Smith Predictor It can be applied to various processes. The real process is approximated via the second order plus time delay model (SOPTD) whose parameters are specified through a model reduction algorithm. We already proposed a new model reduction method that considered four point in the Nyquist curve to reduced the steady state error between the real process model and the reduced model using the gradient decent method and the genetic algorithms. In addition, the Smith predictor is used to compensate time delay of the real process model. In this paper, the new optimum parameter tuning algorithm for PID controller of the Smith Predictor is proposed through ITAE as performance index. The Simulation results show the validity and improvement of performance for various processes.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.117-121
• /
• 1990

The control process involving pure time delays presents a continuing challenge to the control system engineer. The nonlinear nature of the delay which can be introduced into the system make the use of conventional control algorithms a poor prospect. The Smith Predictor was developed to alleviate this problem. Unfortunately the quality of control achieved with the Smith Predictor is known to be sensitive to modelling errors. Only recently have researchers attempted to quantify the Smith Predictor controller's robustness to modelling errors. In several studies stability boundaries were plotted as functions of errors in parameters. But the research results address the question of performance of Smith Predictor controllers, In this paper, the Rule based Expert Systems for performance improvement of the Smith Predictor controller are developed.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.9-15
• /
• 2003

To improve the performance of PID controller of high order systems by model reduction, we proposed two model reduction methods. One, Original model with two point $({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$ in Nyquist curve used gradient base method and genetic algorithm. The other, Original model without two point$({\angle}G(jw)=\;-{\pi}/2,\;-{\pi})$in Nyquist curve used to add very small dead time. This method has annexed very small dead time on the base model for reduction, and we remove it after getting the reduced model, and , we improved Smith-predictor for a dead-time compensator using genetic algorithms. This method considered four points$({\angle}G(jw)=0,\;-\pi/2,\;-\pi,\;-3\pi/2)$ in the Nyquist curve to reduce steady state error between original and reduced model. It is shown that the proposed methods have more performance than the conventional method.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.396-406
• /
• 2007

In this paper, we proposed development of improved model reduction and design of hierarchical controller using reduction model. The model reduction is considered that it is the transient response and the steady-state response through the use of nyquist curve. The hierarchical controller selected tuning of PID controller to ensure specified gain and phase margin and hybrid smith-predictor fuzzy controller using reduction model. Simulation examples are given to show the better performance of the proposed method than conventional methods.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권3호
• /
• pp.129-136
• /
• 2007

In this paper, we suggest PI control with the Smith predictive controller to improve transient response of a variable speed refrigeration system (VSRS). As the refrigeration system has long dead time inherently, it is difficult to get fast responses of super-heat and reference temperature. We incorporated the Smith predictive controller into PI to compensate the effect of the long dead time of the system. At first, we introduced the decoupling model of the system to control capacity and superheat simultaneously and independently. Next, we designed the predictive controller of the superheat based on PI control law. Finally, the control performance by the proposed method was investigated through some numerical simulations and experiments. The results of the simulations and experiments showed that the proposed PI control with the predictive controller could obtain acceptable transient behaviour for the system.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.15-19
• /
• 2005

시간지연이 존재하는 시스템의 제어기 설계에 많이 사용되는 Smith Predictor는 플랜트와 모델이 완전히 일치해야만 특성방정식에서 시간지연을 제거 할 수 있기 때문에 실제 공정에서는 적용하기가 매우 어렵다. 본 논문에서는 Smith Predictor의 모델을 플랜트와 일치한 식이 아닌 시간지연을 포함한 2차식 형태로 제안하여 큰 시간지연에서의 응답특성을 향상 시켰다. PI 제어기의 적분상수의 범위를 제안하였다.