• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.73-81
• /
• 2005

Mineralogical and chemical examinations were performed on chlorite-smectite mixed layer minerals that occur in the sandstones from a petroleum exploration well in the southern part of the Ulleung Basin. X-ray diffraction and chemical analyses show that the chlorite-smectite mixed layer mineral is tosudite, a 1 : 1 R1 ordered interstratification of chlorite and smectite with an overall dioctahedral character. This mineral is almost the same as the tosudite reported from hydrothermally-altered regions, which is rich in Li. This fact indicates that the tosudite area may be affected by hydrothermal events, because the studied well is located in the tectonically-deformed area, in which lots of trust faults and folds are present. In these respects, the formation of tosudite is probably due to the variable effect of hydrothermal fluids from the deeper part of the area.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.315-326
• /
• 1989

The pottery stone diposits of the Cheongsong area consist of abundant quartz with clay minerals such as mica/smectite interstratified mineral, tosudite, kaolinite and sericite. The occurrence and mineralogical properties of the clay minerals were investigated by X-ray diffraction method, chemical analysis, DTA and IR. The mineral transformation by hydrothermal alteration was also discussed. Tosudite occurs in the Beopsoo pottery stone deposit, it seem to be Li-beraing tosudite. Mica/smectite interstratified minerals with less than about 20% expandable layers are commonly observed in the pottery stone deposits of the area. The mica/smectite interstratified minerals tend to increase the expandable layers as the progress of alteration. The pottery stones from this area seem to be altered from rhyolite or welded tuff by hydrothermal solution.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.119-129
• /
• 1987

Sediments in the cores from the KONOD-1 area consist mainly of authigenic smectite and clinoptilolite, and terrigenous minerals of illite, chlorite, kaolinite, quartz, and plagioclase. The authigenic minerals become dominant over the terrigenous minerals with increasing depth. Clinoptilolite occurs at the deeper core depth because its formation is slower than that of smectite. The vertical distribution of minerals indicates that the eolian influence, probably in the late Oligocene, diluted the abundance if smectite in near-surface sediments. This vertical distribution pattern may also have been affected by progressive dissolution of authigenic minerals in the near surface sediments.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.395-401
• /
• 2009

The smectite-illite (SI) reaction is a ubiquitous process in siliciclastic sedimentary environments. For the last 4 decades the importance of smectite to illite (S-I) reaction was described in research papers and reports, as the degree of the (S-I) reaction, termed "smectite illitization", is linked to the exploration of hydrocarbons, and geochemical/petrophysical indicators. The S-I transformation has been thought that the reaction, explained either by layer-by-layer mechanism in the solid state or dissolution/reprecipitation process, was entirely abiotic and to require burial, heat, and time to proceed, however few studies have taken into account the bacterial activity. Recent laboratory studies showed evidence suggesting that the structural ferric iron (Fe(III)) in clay minerals can be reduced by microbial activity and the role of microorganisms is to link organic matter oxidation to metal reduction, resulting in the S-I transformation. In abiotic systems, elevated temperatures are typically used in laboratory experiments to accelerate the smectite to illite reaction in order to compensate for a long geological time in nature. However, in biotic systems, bacteria may catalyze the reaction and elevated temperature or prolonged time may not be necessary. Despite the important role of microbe in S-I reaction, factors that control the reaction mechanism are not clearly addressed yet. This paper, therefore, overviews the current status of microbially mediated smectite-to-illite reaction studies and characterization techniques.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.131-145
• /
• 2015

Thermodynamic prediction of weathering products from primary aquifer minerals around underground disposal sites was investigated. The distribution of solubility quotients for kaolinite-smectite reactions showed the trend of reaching at equilibrium with Ca-, Mg-, and Na-smectite for deep groundwaters in granitic aquifers. The values of $10^{-14.56}$, $10^{-15.73}$, and $10^{-7.76}$ were proposed as equilibrium constants between kaolinite and Ca-, Mg-, and Na-smectite end members, respectively. On stability diagrams, most of deep groundwaters were located at equilibrium boundaries between stability fields of kaolinite and smectites or on stability fields of smectites and illite. Shallow groundwaters in basic rock aquifer were plotted at the same stability areas of deep granitic groundwaters on stability diagrams. The results indicated that the primiary mineralogical composition may be important to predict weathering products in deep aquifers.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.301-310
• /
• 2006

Smectites were synthesized from Na-P type and Na-A type zeolites by the hydrothermal synthetic method, and their physicochemical properties were studied. The optimal synthetic conditions for producing smectite were $290^{\circ}C$, 72 hr and $75{\sim}100kgf/cm^2$ in autogenous pressure. pHs of initial reaction solutions for the synthesis of smectites from Na-P type and Na-A type zeolite s were pH 6 and pH 10, respectively. The synthetic smectite was confirmed as $12{\AA}$-beidellite by a series of analysis such as X-ray diffraction analysis with random and oriented mounts, ethylene glycol treatment, and Greene-Kelly test, and their several physicochemical properties were studied.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.171-181
• /
• 2002

Glauconization was investigated by morphological and chemical analysis of glaucony from the Pohang Tertiary marine sediments. The glaucony, which is present sparsely in turbidite sandstones, shows two distinct stages in morphology and chemistry. Crystallization of glaucony starts preferentially from the interior of pellet-like grains, then to the outer region of the grains with increasing K and Fe, and decreasing Al. Furthermore, smectite-like glaucony is evolved into illite-like glaucony through interstratified glauconite-smectite with increases in K and Al, and decrease in Fe.

• Journal of the Mineralogical Society of Korea
• /
• v.10 no.2
• /
• pp.97-104
• /
• 1997

Based on the method of determination for relative stability of each phase from the difference among the interaction parameters of the phases consisting the mixed layer, the types of interactions between layers were specified and interaction parameter between layers in ordered domain was analytically derived as a function parameter between layers in ordered domain was analytically derived as a function of not only temperature and mole fraction of layers but also ordering parameter. Interaction parameter between the different layers in ordered phase, L is as follows:{{{{ {L }_{1 } (X,Q,T)= { C} over { Q} -4(1-2Q) { L}^{2 } - { RT} over {2} ln { 1} over {2 } - { 2RT} over { { X}_{ s} } ln { { 4QX}`_{s } ^{2 } } over {(1- { X}_{s }- { QX}_{s })( { X}_{s }- {QX }_{s } ) } }}}}L2 is the interaction parameter between ordered and disordered phase in domain and is the mole fraction of the domain which represent the infinite length of mixed layer mineral and Q and C are the reaction progress parameter and arbitrary constant, respectively. This equation was used for the I/S mixed layer clay minerals to infer the relative stability of R1 type I/S mixed layer in the temperature range from 373K to 450K. The result of calculation suggest that, owing to the decrease in interaction parameter with increasing temperature. The interaction parameter decreases more rapidly with decreasing mole fraction of smectite in domain, which is consistent with the fact that the probability of finding the series smectite layer is lo in the domain with small mole fraction of smectite layers in natural system.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.83-89
• /
• 2007

XRD, HRPD and SEM were used for mineralogical characterization of fault clay in fracture zone from Ipsil. Variations of color in fault clay exhibit significant mineral composition difference. Fault clays from Ipsil are composed mainly of smectite, laumontite, and quartz. Laumontite, a distinct fault clay in Ipsil fault, might be resulted from alteration of bed rock in fracture zone based on the result that no laumontite was found near fault rock. Fault clays from Ipsil are composed mainly of smectite.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.141-150
• /
• 2010

Basaltic ash of Udo tuff cone, Jeju Island, was almost fresh across strata, but significantly altered toward surface by supergene process. The supergene alteration of the Udo tuff was examined by using X-ray diffraction, scanning and transmission electron microscopy, and electron microprobe analysis for elucidating the alteration process of basaltic ash in terrestrial environments. Fresh ash particles were composed of glass matrix, plagioclase, olivine, and pyroxene. The glass matrix was selectively replaced inward by colloform alteration rinds of Fe-Ti-rich amorphous silicate nanogranules and smectite, often leaving glass core at the center of larger ash particles. Some of the dissolved species released from the altered ash particle precipitated as fine honycomb aggregates of smectite on the pore walls, contributing to the cementation and lithification of volcanic ash.