• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.243-249
• /
• 2012

These days it is becoming more and more common to find electronic medical screening systems installed in Oriental hospitals and clinics. This is a relatively new development for the practice of traditional Oriental medicine. Specifically, Pulse detection machines are being utilized in order to help determine a patient's disease scientifically. However, identifying and diagnosing the specific disease correctly for each patient is still very difficult in Oriental medicine. The intention of this paper is to propose a solution which uses two separate Electronic systems working together to produce a better likelihood of finding the correct diagnosis for each patient. It is proposed that an EMR intelligent electronic chart system be developed and employed, which would utilize both Pulse wave system and a tongue detection system at the same time, in order to solve the problem. Computer simulation results have proven to show that EMR systems used in hospitals and clinics are more efficient and yield a more accurate diagnosis than traditional methods.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.34-39
• /
• 2019

Millimeter-wave (mmWave) and Non-orthogonal multiple access (NOMA) are expected to be the major techniques that lead to the next generation wireless communication. NOMA provides a high spectrum efficiency by sharing of spatial resources among users in the same frequency band. Meanwhile, millimeter-wave gives a huge underutilized bandwidth at extremely high frequency band (EHF) which covers 30GHz to 300GHz. These techniques have been proven in several recent literatures to achieve high data rates. The combination of NOMA and millimeter-wave techniques further improves average sum capacities, as well as reduces the interference compared to conventional wireless communication systems. In this paper, we focus on hybrid NOMA system working in millimeter-wave frequency. We propose a clustering algorithm used for a hybrid NOMA scheme to optimize the usage of wireless resources. The proposed clustering algorithm adds several conditions in grouping users and defining clusters to increase the probability of the successful superposition decoding process. The performance of the proposed clustering algorithm is investigated in hybrid NOMA system and compared with the conventional orthogonal multiple access (OMA) scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2015

Quay cranes are considered core equipment for container terminal operation. However, unmanned operation systems have not as yet been announced due to the technological difficulties of implementation. In this paper, we developed a wireless controller to control a quay crane simulator remotely and conducted its performance test, a first step toward unmanned operation of quay cranes. The communication delay of a developed wireless controller was about 9.4ms on average while that of existing wired controllers was about 5.6ms. The same functions were implemented and tested on a smart phone where the average communication delay was 7.3ms. In addition, to apply the developed system into a real environment, we proposed a network architecture based on IEEE 802.11ac and carried out its performance evaluation. When the distance between two nodes was 50m apart, the throughputs of the TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) were 57Mbps and 189Mbps, respectively. The communication delay of the control data was 9.1ms through the TCP channel. These results reveal the proper working of remote quay crane operation if we adopt the IEEE 802.11ac network.

• Transactions of Materials Processing
• /
• v.7 no.3
• /
• pp.246-259
• /
• 1998

This paper describes a research work of developing a computer-aided design and manufacturing of irregular shaped sheet metal product for blanking or piercing and bending operations. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories experimental results and the empirical knowledge of field experts, This system has been written in AutoLISp on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules which are input and shape treatment, flat pattern-layout, pro-processor module. Based on the knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product complexities of blank geometry and punch profile sheet metal to give flat pattern and automatically account for the adjustment of bending allowances to match tooling requirements by checking dimensions and generating NC data automatically according to drawings of die-layout module. Results carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing and bending die in this field.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.379-388
• /
• 2013

u-Healthcare integration between ICT and healthcare service is able to utilize effectively for people's healthcare anywhere and any time. The purpose of this study is to explore the perception and influence factors on intention to use u-Healthcare service of physicians and staffs working for medical institutions. Ninety eight(98) valid cases have been collected for this study. It is also analysed by SPSS 18.0 and SmartPLS 2.0M3. Empirical findings provide important insights as follows: firstly, performance expectation, effort expectation and social influence positively influence intention to use u-Healthcare service; secondly, perceived risk negatively influences usage intention, and finally, performance expectation, effort expectation and perceived risk are moderated by voluntariness.

• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.541-554
• /
• 2015

In this research in order to grasp the recent research trends of clothing comfort in Korea, 584 theses have been analyzed about the forms, contents and subjects of their researches which have been published in four Korean Journals from 2000 to 2012. The results are as follows: Many of the research contents were on the clothing comfort and environmental adaptation clothes in all journals. Handle, skin temperature, clothing pressure and working clothes showed the highest frequency ln the key words. The review studies were the fewest, and experimental or survey researches were largely conducted. The research forms showed the significant differences according to the research contents. The subjects were largely focused on those aged from 18 to 29, and among the research subjects on clothing comfort, female were more than male. However, in the researches on clothing quantity and clothes wearing conditions, many of them were the studies whose subjects were both men and women. The male and old subjects increased more and more. The number of the theses in the field of clothing environmentology showed the gradually increasing tendency. The most rates were the theses on clothing comfort, but as the number of those on environment adaptation clothes increased more and more, the research contents in the two fields showed much the same. Though the attention to aging and smart clothes is increasing, the research on this is very few. Therefore, it is thought that the study on this field will have to be conducted actively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.724-727
• /
• 2015

Over time, advanced technology became more complicated and the requirement of work have been more harder. So there is a need for systematic management system. Modern process has most of the management system. However, in a typical process, there is still no management system. We are only managed in the process according to the memoirs and oral by -step cycle also experience. As a result, the business is stagnant, efficiency in terms of quality will be even lower. Thus, in this paper, not only the modern process, even in a general process, it is desired to develop a process management system that can provide a more efficient working environment.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.127-130
• /
• 2002

The 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting, and its microstructures and tensile test for the cold rolled composites with maximum 50% reduction ratio were investigated. In the case of TiNi fiber with 2mm interval in preform, the interface bonding of fabricated composites were good. EPMA analysis results were found the small amount of Mg, Si segregated interface of diffusion layer. Transverse section of TiNi fiber was decreased with increasing reduction ratio and 40% reduction ratio was observed microcrack from TiNi fiber. And the tensile strength of composites at 38% reduction ratio was 194MPa. In the case of over 38% reduction ratio, the decrease of the tensile strength was due to TiNi fiber rupture by excess working. The fracture mode was appeared brittle fracture with increasing reduction ratio

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.155-159
• /
• 1998

This paper describes a research work of developing a computer-aided design and manufacturing (CAD-CAM) of irregular shaped sheet metal product for blanking or piercing and bending operation. An approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated form plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLIST on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules. the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of unfolding a formed sheet metal to give flat pattern and automatically account for the adjustment of bending allowances to match tooling requirements by checking dimensions and generating NC data automatically according to drawings of die-layout module. Results carried out in each module will provide efficiencies to the designer and the manufacture of blanking or piercing and bending die in this field.