• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.55-62
• /
• 2023

Slotted-Aloha (S-Aloha) has been widely employed in random access networks owing to its simple implementation in a distributed manner. To enhance the throughput performance of the S-Aloha, connection-based slotted-Aloha (CS-Aloha) has been proposed in recent years. The fundamental principle of the CS-Aloha is to establish a connection with a short-sized request packet before transmitting data packets. Subsequently, the connected node transmits long-sized data packets in a batch of size M. This approach efficiently reduces collisions, resulting in improved throughput compared to the S-Aloha, particularly for a large M. In this paper, we address the short-term fairness of the CS-Aloha, as quantified by Jain's fairness index. Specifically, we evaluate how equitably the CS-Aloha allocatestime slots to all nodes in the network within a finite time interval. Through simulation studies, we identify the impact of system parameters on the short-term fairness of the CS-Aloha and propose an optimal transmission probability to support short-term fairness.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.144-156
• /
• 2005

Video streaming over wireless networks is challenging due to node mobility and high channel error rate. In this paper, we propose a multi-source video streaming (MUVIS) system to support high quality video streaming service over IEEE 802.1l-based wireless networks. We begin by collocating a streaming proxy with the wireless access point to help leverage both the media server and peers in the WLAN. By tracking the peer mobility patterns and performing content discovery among peers, we construct a multi-source sender group and stream video using a rate-distortion optimized scheme. We formulate such a multi-source streaming scenario as a combinatorial packet scheduling problem and introduce the concept of asynchronous clocks to decouple the problem into three steps. First, we decide the membership of the multisource sender group based on the mobility pattern tracking, available video content in each peer and the bandwidth each peer allocates to the multi-source streaming service. Then, we select one sender from the sender group in each optimization instance using asynchronous clocks. Finally, we apply the point-to-point rate-distortion optimization framework between the selected sender-receiver pair. In addition, we implement two different caching strategies, simple caching simple fetching (SCSF) and distortion minimized smart caching (DMSC), in the proxy to investigate the effect of caching on the streaming performance. To design more realistic simulation models, we use the empirical results from corporate wireless networks to generate node mobility. Simulation results show that our proposed multi-source streaming scheme has better performance than the traditional server-only streaming scheme and that proxy-based caching can potentially improve video streaming performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4411-4431
• /
• 2014

Mobile ad hoc networks (MANETs) have recently gained increased interest due to the widespread use of smart mobile devices. Group communication applications, serving for better cooperation between subsets of business members, become more significant in the context of MANETs. Multicast routing mechanisms are very useful communication techniques for such group-oriented applications. This paper deals with multicast routing problems in terms of stability and scalability, using the concept of stable core. We propose LMRSC (Lightweight Multicast Routing Based on Stable Core), a lightweight multicast routing technique for MANETs, in order to avoid periodic flooding of the source messages throughout the network, and to increase the duration of multicast routes. LMRSC establishes and maintains mesh architecture for each multicast group member by dividing the network into several zones, where each zone elects the most stable node as its core. Node residual energy and node velocity are used to calculate the node stability factor. The proposed algorithm is simulated by using NS-2 simulation, and is compared with other multicast routing mechanisms: ODMRP and PUMA. Packet delivery ratio, multicast route lifetime, and control packet overhead are used as performance metrics. These metrics are measured by gradual increase of the node mobility, the number of sources, the group size and the number of groups. The simulation performance results indicate that the proposed algorithm outperforms other mechanisms in terms of routes stability and network density.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.790-795
• /
• 2011

The need for broadband wireless data networks such as IEEE 802.16e WiMAX systems increases as a variety of wireless information devices like smart phones are adopted rapidly in everyday life. Since most of mobile applications employ TCP as their transport layer protocol, the performance improvement of TCP in WiMAX systems is crucial. This paper proposes an efficient method to transmit uplink piggyback ACK packets by exploiting the uplink packet buffering which happens because of the resource allocation scheme of the WiMAX systems. The proposed method can support not only the ACK filtering but also the merging of the piggyback ACK packets. As a result, the bandwidth reduction in the piggyback ACK packet transmission leads to the improvement of the downlink throughput. The simulation results show that the bandwidth for the ACK packets reduces more than 90%, and the downlink throughput increases at least 30%.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.227-234
• /
• 2011

Many technologies for wireless internet are increasing as more and more laptop computers, net books, smart phone and other terminals, which provide wireless network, are created. IEEE 802.11 is computer wireless network technology that used in small area, called wireless LAN or Wi-Fi. IEEE 802.11 is a set of standards for implementing wireless local area network (WLAN) computer communication in the 2.4, 3.6 and 5 GHz frequency bands. They are created and maintained by the IEEE LAN/MAN Standards Committee (IEEE 802). AP (Access Point) is installed at cafes and public places providing wireless environment. It is more convenient to use wireless internet, however, It can be seen easily around us and possible to communicate with AP. IEEE 802.11 has many vulnerability, such as packet manipulation and information disclosure, so we should pay more attention when using IEEE 802.11. Therefore this paper developing monitoring system which can find out AP and Stations that connect with it, and capturing AP's information to find out vulnerability. This paper suggests monitoring system which traffic analysis in wireless environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.259-264
• /
• 2014

IEEE 802.15.4 has been emerging as the popular choice for various monitoring and control applications. In this paper, a fault management system for DC power-lines has been designed using IEEE 802.15.4, in order to monitor DC power-lines in real time, and to rapidly detect faults and shut off the line where such faults occur. Numbers were allocated for each node and unslotted CSMA-CA method of IEEE 802.15.4 was used, the performance of which was analyzed by a simulation. For such purpose, a total of 60 bits of the control data consisting of 16 bits of the current, 16 bits of the amplitude, 28 bits of the terminal state data were sent out, and the packet transfer rate and the transmission delay time of the fault management system for DC power-lines were measured and analyzed. When the traffic load was 330 packets per second or lower, the average delay time was shown to be shorter than 0.02 seconds, and when the traffic load was 260 packets per second or lower, the packet transfer rate was shown to be 99.99% or higher. Therefore, it was confirmed that the stringent condition of US Department of Energy (DOE) could be satisfied if the traffic load was 260 packets per second or lower, The results of this study can be utilized as basic data for the establishment of the fault management system for DC power-lines using IEEE 802.15.4.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.55-61
• /
• 2012

Owing to the development of wireless infrastructure and mobile communication technology, There is growing interest in smart phone using it. The resulting popularity of smart phone has increased the Mobile Malicious AP-related security threat and the access to the wireless AP(Access Point) using Wi-Fi. mobile AP mechanism is the use of a mobile device with Internet access such as 3G cellular service to serve as an Internet gateway or access point for other devices. Within the enterprise, the use of mobile AP mechanism made corporate information management difficult owing to use wireless system that is impossible to wire packet monitoring. In this thesis, we propose mobile AP mechanism-based mobile malicious AP detection and prevention mechanism in radius authentication server network. Detection approach detects mobile AP mechanism-based mobile malicious AP by sniffing the beacon frame and analyzing the difference between an authorized AP and a mobile AP mechanism-based mobile malicious AP detection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.37-41
• /
• 2018

As individuals generate and share various content anytime and anywhere, new networking architectures, such as content-centric networking (CCN) using the content name as a packet identifier, have been in the spotlight recently. However, the current CCN hardly takes into account node mobility problems, especially the mobility of content sources. The movement of content sources causes long delivery latency and long service disruptions. To solve that, the tunneling-based redirection scheme was proposed. However, the tunneling-based scheme requires a location-update procedure whenever the network changes, which creates many control messages and causes long latency. So, this paper presents hierarchical mobility management of mobile CCN to reduce the number of control messages and handoff latency. Performance evaluation shows that the proposed scheme can provide low control overhead, which results in network scalability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.71-77
• /
• 2011

In this paper, we propose a conversational quality measurement (CQM) system for providing the objective QoS of high quality mobile VoIP voice telecommunication. For measuring the conversational quality, the VoIP telecommunication system is implemented in two smart phones connected with VoIP. The VoIP telecommunication system consists of echo cancellation, noise reduction, speech encoding/decoding, packet generation with RTP (Real-Time Protocol), jitter buffer control and POS (Play-out Schedule) with LC (loss Concealment). The CQM system is connected to a microphone and a speaker of each smart phone. The voice signal of each speaker is recorded and used to measure CE (Conversational Efficiency), CS (Conversational Symmetry), PESQ (Perceptual Evaluation of Speech Quality) and CE-CS-PESQ correlation. We prove the CQM system by measuring CE, CS and PESQ under various SNR, delay and loss due to IP network environment.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2019

Recent research on energy harvesting wireless sensor networks focuses on the development of techniques to solve the limited energy resource problem and to extend the whole network life efficiently. Energy harvesting technology can increase the lifetime of a network, but data transmission becomes unavailable when it harvests energy from radio frequency, resulting longer network delay with respect to the increased time in energy harvesting. Therefore, building energy harvesting wireless sensor network should consider the possible network delay as well as the network lifetime problem. In this paper, we propose a new MAC protocol that minimizes end-to-end network delay by adjusting the data transmission time for a packet based on estimating the energy for data transmission along with the amount of traffic flowing into the network and harvested energy. For this goal, it engineers an energy management mechanism that adjusts the sleep time of the network by measuring energy harvesting time. In addition, with simulation results it shows that the proposed MAC protocol improves the performance in terms of energy consumption and end-to-end delay, compared to the existing MAC protocols.