• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.211-218
• /
• 2017

In this study, we implemented IoT Sensor Network using Mobius Platform and implemented four kinds of Z-wave sensors applicable to smart home service to verify its performance. The 12 common service functions (CSF) provided by Mobius enable application services including status monitoring of sensors to be implemented quickly. The standard service procedures and protocols have eliminated the design process of the system and shortened the meeting time for establishing protocol between application software developer, gateway developer and sensor developer, and discussion time for adjustment of opinion. We confirmed that the application service based on the implemented sensor network and the implementation of IoT sensor can shorten the development schedule, and confirmed that most of the products purchased in the market can be accommodated without change. We hope that such speediness and openness will be able to meet the demands of various services and contribute to expanding services and creating new markets.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.231-242
• /
• 2020

The thesis presents a system that continuously collects the human body's physiological vital information at rest with sensors and ICT information technology and predicts diabetes using the collected information. it shows the artificial neural network machine learning method and essential basic variable values. The study method analyzed the correlation between heart rate measurements of BCG and ECG sensors in 20 DM- and 15 DM+ subjects. Artificial Neural Network (ANN) machine learning program was used to predictability of diabetes. The input variables are time domain information of HRV, heart rate, heart rate variability, respiration rate, stroke volume, minimum blood pressure, highest blood pressure, age, and sex. ANN machine learning prediction accuracy is 99.53%. Thesis needs continuous research such as diabetic prediction model by BMI information, predicting cardiac dysfunction, and sleep disorder analysis model using ANN machine learning.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.209-230
• /
• 2016

The Canton Tower is a high-rise slender structure with a height of 610 m. A structural health monitoring system has been instrumented on the structure, by which data is continuously monitored. This paper presents an investigation on the identified modal properties of the Canton Tower using ambient vibration data collected during a whole day (24 hours). A recently developed Fast Bayesian FFT method is utilized for operational modal analysis on the basis of the measured acceleration data. The approach views modal identification as an inference problem where probability is used as a measure for the relative plausibility of outcomes given a model of the structure and measured data. Focusing on the first several modes, the modal properties of this supertall slender structure are identified on non-overlapping time windows during the whole day under normal wind speed. With the identified modal parameters and the associated posterior uncertainty, the distribution of the modal parameters in the future is predicted and assessed. By defining the modal root-mean-square value in terms of the power spectral density of modal force identified, the identified natural frequencies and damping ratios versus the vibration amplitude are investigated with the associated posterior uncertainty considered. Meanwhile, the correlations between modal parameters and temperature, modal parameters and wind speed are studied. For comparison purpose, the frequency domain decomposition (FDD) method is also utilized to identify the modal parameters. The identified results obtained by the Bayesian method, the FDD method and a finite element model are compared and discussed.

• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.665-682
• /
• 2015

Structural identification or St-Id is 'the parametric correlation of structural response characteristics predicted by a mathematical model with analogous characteristics derived from experimental measurements'. This paper describes a St-Id exercise on Humber Bridge that adopted a novel two-stage approach to first calibrate and then validate a mathematical model. This model was then used to predict effects of wind and temperature loads on global static deformation that would be practically impossible to observe. The first stage of the process was an ambient vibration survey in 2008 that used operational modal analysis to estimate a set of modes classified as vertical, torsional or lateral. In the more recent second stage a finite element model (FEM) was developed with an appropriate level of refinement to provide a corresponding set of modal properties. A series of manual adjustments to modal parameters such as cable tension and bearing stiffness resulted in a FEM that produced excellent correspondence for vertical and torsional modes, along with correspondence for the lower frequency lateral modes. In the third stage traffic, wind and temperature data along with deformation measurements from a sparse structural health monitoring system installed in 2011 were compared with equivalent predictions from the partially validated FEM. The match of static response between FEM and SHM data proved good enough for the FEM to be used to predict the un-measurable global deformed shape of the bridge due to vehicle and temperature effects but the FEM had limited capability to reproduce static effects of wind. In addition the FEM was used to show internal forces due to a heavy vehicle to to estimate the worst-case bearing movements under extreme combinations of wind, traffic and temperature loads. The paper shows that in this case, but with limitations, such a two-stage FEM calibration/validation process can be an effective tool for performance prognosis.

• Smart Structures and Systems
• /
• v.22 no.4
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.65-72
• /
• 2018

The uses of unmanned aerial vehicles (UAV) have been expanding in agriculture surveys, obtaining real time updates of dangerous facilities where human access is difficult, disaster monitoring, and 3D modeling. In reality, there is an upsurge in the application of UAVs in fields like, construction, infrastructure, imaging, surveying, surveillance and transportation. Especially, when the slope failure such as landslide occurs, the uses of UAVs are increasing. Since, the UAVs can fly in three dimensions, they are able to obtain spatial data in places where human access is nearly impossible. Despite of these advantages, however, the uses of UAVs are still limited during slope failure. In order to overcome these limitations, this study computes the soil volume change during slope failure through the computation technique using photogrammetric information obtained from UAV system. Through this study, it was found that photogrammetric information from UAV can be used to acquire information on amount of earthworks required for repair works when slope collapse occurs in mountainous areas, where human access in difficult.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.4
• /
• pp.23-32
• /
• 2021

For agricultural water management, it is essential to establish the digital infrastructure data such as agricultural watershed, irrigated area and canal network in rural areas. Approximately 70,000 irrigation facilities in agricultural watershed, including reservoirs, pumping and draining stations, weirs, and tube wells have been installed in South Korea to enable the efficient management of agricultural water. The total length of irrigation and drainage canal network, important components of agricultural water supply, is 184,000 km. Major problem faced by irrigation facilities management is that these facilities are spread over an irrigated area at a low density and are difficult to access. In addition, the management of irrigation facilities suffers from missing or errors of spatial information and acquisition of limited range of data through direct survey. Therefore, it is necessary to establish and redefine accurate identification of irrigated areas and canal network using up-to-date high resolution images. In this study, previous existing data such as RIMS (Rural Infrastructure Management System), smart farm map, and land cover map were used to redefine irrigated area and canal network based on appropriate image data using satellite imagery, aerial imagery, and drone imagery. The results of the building the digital infrastructure in rural areas are expected to be utilized for efficient water allocation and planning, such as identifying areas of water shortage and monitoring spatiotemporal distribution of water supply by irrigated areas and irrigation canal network.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.21-28
• /
• 2021

In this study, we propose a deep learning-based NILM technique using actual measured power data for 5 kinds of home appliances and verify its effectiveness. For about 3 weeks, the active power of the central power measuring device and five kinds of home appliances (refrigerator, induction, TV, washing machine, air cleaner) was individually measured. The preprocessing method of the measured data was introduced, and characteristics of each household appliance were analyzed through spectogram analysis. The characteristics of each household appliance are organized into a learning data set. All the power data measured by the central power measuring device and 5 kinds of home appliances were time-series mapping, and training was performed using a LSTM neural network, which is excellent for time series data prediction. An algorithm that can disaggregate five types of energies using only the power data of the main central power measuring device is proposed.

• International journal of advanced smart convergence
• /
• v.11 no.1
• /
• pp.111-116
• /
• 2022

After COVID-19, the number of people with sleep disorders around the world is increasing. In particular, in the flow of the 4th industrial revolution, the differentiation of types and characteristics of the sleep industry is accelerating. Therefore, in this study, the characteristics of each type of sleep-related industry were reclassified from an industrial point of view, and based on this, an attempt was made to review the classification system that can help companies develop sleep products and improve related national systems. Based on the 10th standard industry classification, we compared input cost, value, and usability and analyzed common characteristics, treatments, and preventive effects based on this. A comprehensive taxonomy using matrix analysis was reviewed. As a result, in terms of cost (A), the most common sleeping products are general mattresses and general bedding. It is an IOT device (auxiliary device), and the value aspect (B, B/D) included sleep cafe, bedding rental and management service, and sleep consulting. In terms of utility (A/B), a total of 6 product groups including sleep aids (health functional foods) belong to this category, and in terms of treatment (A/C), a total of 3 product groups including sleep clinics (medical services) belong to this category. As for the product group (A/D) with both properties, it was found that non-insurance sleep treatment medical devices, sleep-related over-the-counter drugs, and some sleep monitoring applications belong to this category. Ultimately, it was found that the sleep industry classification enables the most active product development and composition according to the relative relationship between cost and utility, and treatment and utility. appeared to be necessary.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.1290-1293
• /
• 2021

Currently, blind people are experiencing a lot of inconvenience in their daily lives. In order to provide helpful service for the visually impaired, this study was carried out to make a new smart glasses that transmit information monitoring walking environment in real-time object recognition. In terms of object recognition, YOLOv4 was used as the artificial intelligence model. The objects, that should be identified during walking of the visually impaired, were selected, and the learning data was populated from them and re-learning of YOLOv4 was performed. As a result, the accuracy was average of 68% for all objects, but for essential objects (Person, Bus, Car, Traffic_light, Bicycle, Motorcycle) was measured to be 84%. In the future, it is necessary to secure the learning data in more various ways and conduct CNN learning with various parameters using darkflow rather than YOLOv4 to perform comparisons in the various ways.