• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.1964-1970
• /
• 2010

A new intelligent power network (Smart Grid) that grafts some new technologies, such as the extension of the new and reproducible energy, electric motors, and electric storages, onto the regulation of green house gases according to the recent convention on climate changes has been actively promoted. As establishing such an intelligent power network, it is possible to implement a real-time rate system according to the change from the conventional single directional information transmission to the bidirectional information transmission. Such a real-time rate system can provide power during the chip rate hour by avoiding the high rate hour although customers use the same level of power through providing such real-time rate information including power generation costs. In this study, the establishment of an operating system that makes an effective use of the real-time rate system and its operation method are to be proposed.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1075-1084
• /
• 2022

Internet of Things(IoT) has become a key available technology for efficiently implementing device to device(D2D) services in various domains such as smart home, healthcare, smart city, agriculture, energy, logistics, and transportation. A lightweight publish/subscribe(Pub/Sub) messaging protocol not only establishes data dissemination pattern but also supports connectivity between IoT devices and their applications. Also, a Pub/Sub broker is deployed to facilitate data exchange among IoT devices. A scalable edge-based publish/subscribe (Pub/Sub) broker overlay networks support latency-sensitive IoT applications. In this paper, we design a hypercube grid quorum(HGQ) for distributed Pub/Sub systems based IoT applications. In designing HGQ, the network of hypercube structures suitable for the publish/subscribe model is built in the edge layer, and the proposed HGQ is designed by embedding a mesh overlay network in the hypercube. As their applications, we propose an HGQ-based mechansim for dissemination of the data of sensors or the message/event of IoT devices in IoT environments. The performance of HGQ is evaluated by analytical models. As the results, the latency and load balancing of applications based on the distributed Pub/Sub system using HGQ are improved.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.42-47
• /
• 2016

Due to advances such as photovoltaic power generation and energy storage system, energy self-consumption smart home system in which energy management system is built and energy is generated in house has been actively researched. In particular, due to the instability of the grid after the Fukushima nuclear accident, home system in which generating electricity from photovoltaic, storing and using it in energy storage system was commercialized in Japan. While subsidizing renewable energy projects through a combination of solar and energy storage systems in North America and Europe has expanded home installation. In this paper, we describe development of self-consumption smart home system which is connecting photovoltaic system and energy storage system in home area network and operating it based on real-time price. We implemented automated self-consumption home in which optimizing the use of energy from the power grid with minimal user's intervention.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.511-518
• /
• 2012

In this study, the trend in green technology was observed and the domain of the green technology area that will be actively studied in the future was found by establishing knowledge map in green technology area and comparing and analyzing green technology information in Korea and overseas in time series. For the purpose of this study, network analysis was conducted for the keyword of green technology information provided by green technology information portal site (www.gtnet.go.kr) operated by Korea Institute of Science and Technology Information. Network analysis was conducted using keyword, and change of study subject was found by dividing the analysis result into periods. In the result of network analysis on top 100 keywords from total English keyword, it was found that renewable energy related areas such as solar energy and biomass had high centrality. When the main keyword trend by year was studied, centrality of solar cell, nanotechnology, smart grid, and fuel cell were found to increase, showing that research and development in generation and use of renewable energy are actively made.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.12
• /
• pp.3889-3903
• /
• 2022

To address the problem of low detection accuracy due to training noise caused by mislabeling when Tri-training for network intrusion detection (NID), we propose a Tri-training algorithm based on cross entropy and K-nearest neighbors (TCK) for network intrusion detection. The proposed algorithm uses cross-entropy to replace the classification error rate to better identify the difference between the practical and predicted distributions of the model and reduce the prediction bias of mislabeled data to unlabeled data; K-nearest neighbors are used to remove the mislabeled data and reduce the number of mislabeled data. In order to verify the effectiveness of the algorithm proposed in this paper, experiments were conducted on 12 UCI datasets and NSL-KDD network intrusion datasets, and four indexes including accuracy, recall, F-measure and precision were used for comparison. The experimental results revealed that the TCK has superior performance than the conventional Tri-training algorithms and the Tri-training algorithms using only cross-entropy or K-nearest neighbor strategy.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.333-339
• /
• 2016

Technology to optimize and utilize the use and supply of the electric power between consumer and supplier has been on the rise among the smart grid power market network in electric power demand management based on the Internet. Open Automated Demand Response system protocol, which can deliver Demand Response needed in electric power demand management to electricity supplier, system supplier and even the user is openADR 2.0b. This paper used the most credible, cosmopolitanly proliferated EPRI open source and analysed the variety of security vulnerability that developed VEN and VTN system may have. Using the simulator for attacking openADR protocol, the VEN/VTN system that has been implemented as EPRI open source was conducted to attack in a variety of ways. As a result of the analysis, we were able to get the results that the VEN/VTN system has security vulnerabilities to the parameter tampering attacks and service flow falsification attack. In conclusion, if you want to implement the openADR2.0b protocol system in the open or two-way communication environment smart grid network, considering a variety of security vulnerability should be sure to seek security technology and services.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.41-51
• /
• 2016

Smart metering systems have become widespread around the world. RF mesh communication systems have contributed to the creation of smarter and more reliable power systems. This paper presents an algorithm for positioning GPRS concentrators to attain delay constraints for a ZigBee-based mesh network. The proposed algorithm determines the number and placement of concentrators using integer linear programming and a queueing model for the given mesh network. The solutions given by the proposed algorithm are validated by verifying the communication network performance through simulations.

• Journal of Korea Multimedia Society
• /
• v.22 no.8
• /
• pp.913-922
• /
• 2019

The Internet of Things (IoT) envisions smart objects collecting and sharing data at a massive scale via the Internet. One challenging issue is how to disseminate data to relevant data consuming objects efficiently. In such a massive IoT network, Mission critical data dissemination imposes constraints on the message transfer delay between objects. Due to the low power and communication range of IoT objects, data is relayed over multi-hops before arriving at the destination. In this paper, we propose a quorum-based adaptive dissemination algorithm (QADA) for the critical data in the monitoring-based applications of massive IoTs. To design QADA, we first design a new stepped-triangular grid structures (sT-grid) that support data dissemination, then construct a triangular grid overlay in the fog layer on the lower IoT layer and propose the data dissemination algorithm of the publish/subscribe model that adaptively uses triangle grid (T-grid) and sT-grid quorums depending on the mission critical in the overlay constructed to disseminate the critical data, and evaluate its performance as an analytical model.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.55-56
• /
• 2015

A smart meter is a kind of electronic meters that measures and records consumption of electric energy in intervals of an hour or less and transmits that information to the remote places. AMI provides two-way communication path between utilities and consumers and should be able to support smart grid's new functionalities such as demand-response actions and real time pricing. The main objective of this paper is to provide a new diagnosis method and system for testing of smart meters in AMI neighborhood area network.