• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.49-56
• /
• 2010

In this study, the control performance of a smart top-story isolation system for tall buildings subjected to wind excitation was investigated. To this end, a 77-story tall building structure was employed and wind loads obtained from wind tunnel test were used for numerical simulations. The top-story of an example structure is separated from the main structure by a smart base isolation system composed of friction pendulum systems (FPS) and MR dampers. The primary purpose of the smart top-story isolation system is to mitigate the dynamic responses of the main structure, but the excessive movement of the isolated top story may cause the unstableness of the building structure. Therefore, the skyhook control algorithm was used to effectively reduce both responses of the isolated top story and the main structure. The control performance of the proposed smart top-story isolation system was investigated in comparison with that of the passive top-story isolation system. It has been shown from numerical simulation results that the smart top-story isolation system can effectively reduce wind-induced responses of the example building structure compared to the passive top-story isolation system with reduction of the top-story movement.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1067-1074
• /
• 2022

An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.6-7
• /
• 2021

3D printing has the unique advantage of the ability to customize freeform products even in small quantities. It was recently applied successfully in the node connection system for the irregular shaped glass design of Gwanggyo Galleria Department Store. This was achieved by applying 3D printing technology for an innovative smart node design. The novel system offers flexibility to address various design challenges in addition to maximizing construction quality and reducing construction period. In this paper, we aim to examine the use of 3D printing based innovative technologies in the construction industry. With this aim in mind, we present the case of the Gwanggyo Galleria Department Store's smart nodes. The key objective of this study is creating awareness in the construction industry of the need to utilize fourth industrial revolution technology in architecture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.421-426
• /
• 2013

Under the education system which is shifting to smart circumstances the level of literacy competencies of pre-service teachers who carry out teaching and learning in the future will be drawn in this study. Because above all the role of inservice teachers is so important that smart education may be smoothly carried out and established, this study has been done for the purpose of establishing the understanding of smart literacy of pre-service teachers who carry out smart education in education field in the future and proposing what competencies be needed. To achieve this goal, first, examined the understanding of smart literacy of pre-service teachers on a basic research. Second, analyzed the competencies level of pre-service teachers on the basis of the index of core competencies for smart education. Third, proposed improvement plan for building up smart literacy core competencies of pre-service teachers. The subjects of this study were surveyed pre-service teachers in a college of education. On the grounds of study it is necessary that define a concept of smart literacy applicable to pre-service teachers and derive standard indexes of core competencies for smart education, also study proposed the requisite curriculum which is capable of fulfilling smart literacy core competencies and improvement plan for building up smart literacy core competencies which is able to reinforce field adaptability as smart education carried out in the high-tech learning circumstances like real education field.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.754-768
• /
• 2022

Purpose: The purpose of this study is to derive improvements through user satisfaction analysis for the smart traffic safety system being applied to improve traffic safety. Method: A survey-based IPA analysis was used to derive system and service improvements for groups of drivers and pedestrians. Result: As a result of the analysis, both drivers and pedestrian groups showed that Quadrant 1(Keep up the Good Work) was 'Perception of risk information', and Quadrant 3(Low Priority) was 'Reliability of warning information'. On the other hand, 'AI display suitability', which was analyzed as Quadrant 1(Keep up the Good Work) in the driver group, was found to be Quadrant 3(Low priority) in the pedestrian group. Conclusion: Satisfaction factors for smart pedestrian safety systems may vary depending on users, and it is judged that user-centered system construction and service provision are necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1123-1146
• /
• 2023

In South Korea, there have been many studies on efficient building-energy management using renewable energy facilities in single zero-energy houses or buildings. However, such management was limited due to spatial and economic problems. To realize a smart zero-energy city, studying efficient energy integration for the entire city, not just for a single house or building, is necessary. Therefore, this study was conducted in the eco-friendly energy town of Chungbuk Innovation City. Chungbuk successfully realized energy independence by converging new and renewable energy facilities for the first time in South Korea. This study analyzes energy data collected from public buildings in that town every minute for a year. We propose a smart city building-energy management model based on the results that combine various renewable energy sources with grid power. Supervised learning can determine when it is best to sell surplus electricity, or unsupervised learning can be used if there is a particular pattern or rule for energy use. However, it is more appropriate to use reinforcement learning to maximize rewards in an environment with numerous variables that change every moment. Therefore, we propose a power distribution algorithm based on reinforcement learning that considers the sales of Energy Storage System power from surplus renewable energy. Finally, we confirm through economic analysis that a 10% saving is possible from this efficiency.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.558-565
• /
• 2012

Schedule management of construction work is critical to completing construction projects within a given period of time. Many efforts have been made and multiple tools have been developed to support the management of construction projects using smart devices such as smartphones and tablet PCs. This study proposed a method for managing construction schedules via a smart device using Flash. The interactive and graphic properties of Flash enable the development of an app that can allow a field manager to manage schedules easily and efficiently. A prototype was implemented using Adobe Flex Builder, and a sample network was applied in a smartphone. It is convenient for a construction manager to manage construction schedules using the tool because Flash controls graphic components easily. In further studies, network diagrams such as CPM (Critical Path Method) should be developed and applied to the app.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.203-204
• /
• 2014

Unlike other members, beams have various cross-sections and they have an important role of delivering the load of slabs. A beam form neighbors the columns and slabs, which makes it difficult to be installed. In a conventional way to exclusively use the form after concrete pouring, the form and a support should be both removed. Then, the support should reinstalled to sustain the stripping time of form, resulting in a structural issue. To solve such structural problem, the study proposes SMART beam form that uses filler panels and supports for filler. The floor filler panels and supports for filler are not removed after concrete curing, to conform to the stripping time of supports. Thus, any structural problem such as cracks and reduction of compressive strength owing to the gap of load bearing capacity can be prevented. The study results will be used as cases for studies on productivity analyses.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.1
• /
• pp.227-236
• /
• 2017

Smart Manufacturing Factory is a paradigm of the future lead to the fourth industrial revolution that led Germany and the United States. Now the automation of the production facility and won a certain degree, and through the process of integrating the entire process, including planning, design, distribution of information and communication technology products in emerging as a core competitiveness of the national economy. In particular, the company accelerated the smart factory building in order to improve the manufacturing industry, cost savings and productivity simply to incorporate internet of things(IoT),Robot, artificial intelligence, big data technology as a factory automation level of sophistication of the system and out to progress to the level that replaces human labor have. In this we should look at the trend of promoting domestic and foreign factories want to present these smart strategies for Korea.

• Earthquakes and Structures
• /
• v.11 no.6
• /
• pp.983-1000
• /
• 2016

To date the engineering community has seen facade systems as non-structural elements with high aesthetic value and a barrier between the outdoor and indoor environments. The role of facades in energy use in a building has also been recognized and the industry is also witnessing the emergence of many energy efficient facade systems. This paper will focus on using exterior skin of the double skin facade system as a dissipative movable element during earthquake excitation. The main aim of this study is to investigate the potential of the facade system to act as a damper system to reduce earthquake-induced vibration of the primary structure. Unlike traditional mass dampers, which are usually placed at the top level of structures, the movable/smart double skin facade systems are distributed throughout the entire height of building structures. The outer skin is moveable and can act as a multi tuned mass dampers (MTMDs) that move and dissipate energy during strong earthquake motions. In this paper, using a three dimensional 10-storey building structure as the example, it is shown that with optimal choice of materials for stiffness and damping of brackets connecting the two skins, a substantial portion of earthquake induced vibration energy can be dissipated which leads to avoiding expensive ductile seismic designs. It is shown that the engineering demand parameters (EDPs) for a low-rise building structures subjected to moderate to severe earthquakes can be substantially reduced by introduction of a smart designed double skin system.