1 |
AAMA 501.4 (2009), Recommended Static Testing Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drift: Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System, American Architectural Manufacturers Association,USA.
|
2 |
Aldemir, U. (2003), "Optimal control of structures with semiactive-tuned mass dampers", J. Sound Vib., 266(4), 847-874.
DOI
|
3 |
AS1170.4 (2007), Structural design actions Part 4: Earthquake actions in Australia, Australian/New Zealand Standard, Australia.
|
4 |
Baird, A., Diaferia, R., Palermo, A. and Pampanin, S. (2011), "Parametric investigation of seismic interaction between precast concrete cladding systems and moment resisting frames", ASCE Structures Congress, Las Vegas, USA, April.
|
5 |
Behr, R.A. (1998), "Seismic performance of architectural glass in mid-rise curtain wall", J. Architec. Eng., 4(3), 94-98.
DOI
|
6 |
Behr, R.A. and Belarbi, A. (1996), "Seismic test methods for architectural glazing systems", Earthq. Spectra, 12(1), 129-143.
DOI
|
7 |
Bupp, R.T., Bernstein, D.S., Chellaboina, V.S. and Haddad, W.M., (2000), "Resetting virtual absorbers for vibration control", J. Vib. Control, 6(1), 61-83.
DOI
|
8 |
Fu, T.S. and Johnson, E.A. (2013), "Active control for a distributed mass damper system", J. Eng. Mech., 140(2), 426-429.
|
9 |
Hareer, R.W. (2007), "Seismic response of building facade with energy absorbing connections", Ph.D. Dissertation, Queensland University of Technology, Brisbane, Australia.
|
10 |
De Matteis, G. (2005), "Effect of lightweight cladding panels on the seismic performance of moment resisting steel frames", Eng. Struct., 27(11), 1662-1676.
DOI
|
11 |
Fu, T.S. and Johnson, E.A. (2010), "Distributed mass damper system for integrating structural and environmental controls in buildings", J. Eng. Mech., 137(3), 205-213.
|
12 |
Goodno, B.J., Pinelli, J.P and Craig, J.I. (1996), "An Optimal design approach for passive damping of building structures using architectural Cladding", Proceeding of the Eleventh World Conference on Earthquake Engineering, Acapulco, Mexico, June.
|
13 |
Hunt, J.P. (2010), "Seismic performance assessment and probabilistic repair cost analysis of precast concrete cladding systems for multistory buildings", Ph.D. Dissertation, University of California, Berkeley, USA.
|
14 |
Ji, H.R., Moon, Y.J., Kim, C.H. and Lee, I.W. (2005), "Structural vibration control using semiactive tuned mass damper", The eighteenth KKCNN Symposium on Civil Engineering-KAIST6, Taiwan, December.
|
15 |
Li, B., Hutchinson, G.L. and Duffield, C.F. (2011), "The influence of non‐structural components on tall building stiffness", Struct. Des. Tall Spec. Build., 20(7), 853-870.
DOI
|
16 |
Li, C. and Lio, Y, (2002), "Further characteristics for multiple tuned mass dampers", J. Struct. Eng., 128(10), 1362-1365.
DOI
|
17 |
Maneetes, H. and Memari, A.M. (2014), "Introduction of an innovative cladding panel system for multistory buildings", Buildings, 4(3), 418-436.
DOI
|
18 |
Yankelevsky, D.Z., Schwarz, S. and Karinski, Y. (2011), "Theory and practice in reducing the vulnerability of residential buildings subjected to extreme loads-a multi hazard perspective", Appl. Mech. Mater.,82(2), 3-14.
DOI
|
19 |
Pinelli, J.P., Craig, J.I. and Goodno, B.J. (1995), "Energy-based seismic design of ductile cladding systems", J. Struct. Eng., 121(3), 567-578.
DOI
|
20 |
Thambiratnam, D. (2010), "Seismic mitigation of building structural systems using passive dampers", Proreeding of the 9th US National and 10th Canadian Conference on Earthquake Engineering, Torento, December.
|
21 |
Moon, K. (2009), "Tall building motion control using double skin façades", J. Architec. Eng., 15(3), 84-90.
DOI
|