• 디지털콘텐츠학회 논문지
• /
• 제13권3호
• /
• pp.431-438
• /
• 2012

현재 국내에는 스마트폰 시장의 성장으로 인해, 많은 모바일 어플리케이션들이 개발되어 출시되고 있다. 그러나 현재까지 모바일 어플리케이션의 사용자들이 무엇에 대해 관심이 많은지에 관한 연구는 부족한 실정이다. 이를 위해 본 연구에서는 기존 스마트폰의 수용 원인에 관한 연구들과 어플리케이션의 수용 요인에 관한 연구들에서 사용된 요인들을 모바일 어플리케이션에 적합하게 변경하여 모바일 어플리케이션의 관심 요소로 설정한다. 그리고 안드로이드 마켓의 상위 20개의 유료 어플리케이션들에 관한 리뷰들을 모바일 어플리케이션의 관심 요소로 코드화하여 어떠한 요소들이 모바일 어플리케이션의 사용자들의 관심을 유도하는지를 분석하고, 분석된 요소를 중심으로 개발 방법을 제시한다. 본 논문은 성공적인 모바일 어플리케이션을 개발하여 출시하려는 개발업체들에게 유익한 정보를 제공할 수 있을 것이다.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.43-50
• /
• 2013

The narrow dynamic range of most smart phone cameras is severely limited. It usually is narrower than the dynamic range of most scenes. So we proposes a illuminance dynamic range expansion using multi-point knee for smart phone camera. Such as logarithmic functions the proposed method compress the image sensor output signal. Additionally, the proposed method was merged into the gamma that is essential circuit for any cameras. To justifying multi-point knee effectiveness, we configure the control and quality evaluation system for smart phone camera module. Experimental results show that the lost information by cut off and saturated affectively reconstructed in darker and in brighter areas. Finally this methods have advantage to implement without any changing hardware for conventional smart phones.

• Journal of Information Technology Applications and Management
• /
• 제23권3호
• /
• pp.49-59
• /
• 2016

Rapid technological advancements and widespread adoption of smart phones in recent years provide students with new opportunities for getting knowledge and making researches in innovation century. As the penetration of smart phone devices in education increases, there is a large growth in the use of these devices especially among the youth. In spite of increasing importance of smart devices in education, the significant features of these technology devices for general learning have not been experientially addressed. In this study we are going to investigate the comparison of smart phone devices and find the necessary conditions for using mobile devices as an educational tool by a conjoint method. There will be five attributes: screen size, batter type, mobile OS, memory capacity and price. By surveying we got the results which showed us the respondents' desire of using specific smart phone; thus, we defined that screen size attribute is the most important device characteristic.

• Journal of Information Technology Applications and Management
• /
• 제24권4호
• /
• pp.133-152
• /
• 2017

Smart factory has been regarded as a big opportunity for manufacturing industries. However, little literature has been studied for the current status of Korean smart factory. Our paper tries to find gaps between research and real world by summarizing the recent literature and cases in Korean context. As the present level of smart factory introductions in Korean small manufacturing firms is lower than what a variety of literature says, our study points out that more efforts, investments and government support are required to catch up with the knowhow and technologies of developed countries although real-time control, enhanced productivity have been obtained. In future research, we will continue the smart factory study with the accumulated real data.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.623-628
• /
• 1998

A new advanced integral reactor of 330 MWt thermal capacity named SMART (System-Integrated Modular Advanced Reactor) is currently under development in Korea Atomic Energy Research Institute (KAERI) for multi-purpose applications. Modular once-through steam generator (SG) and self-pressurizing pressurizer equipped with wet thermal insulator and cooler are essential components of the SMART. The SMART Provides safety systems such as Passive Residual Heat Removal System (PRHRS). In this study, a computer code for performance analysis of the PRHRS is developed by modeling relevant components and systems of the SMART. Using this computer code, a performance analysis of the PRHRS is performed in order to check whether the passive cooling concept using the PRHRS is feasible. The results of the analysis show that PRHRDS of the SMART has excellent passive heat removal characteristics.

• 대한임베디드공학회논문지
• /
• 제10권5호
• /
• pp.307-315
• /
• 2015

Recently, Smart Home System(SHS) is applied in order to provide comfort, energy efficient and better security to the residence. Thus, by introducing the SHS in the house of elderly people, it is possible to provide a convenient and safe life for old people especially living alone. This paper presents the design and implementation of a low cost but yet flexible and secure smart-phone based SHS. The design is based on inter-working between Arduino board with Bluetooth and Arduino board with Ethernet shield, and the home monitor/appliances are connected to the input/output ports of this board via sensors/relays. In addition, when the old man is put on an emergency, the proposed system will automatically notify it the family. Therefore, we have implemented an inexpensive and efficient SHS for the elderly living alone by inter-working smart phones, internet server and Arduino micro-controller.

• 대한임베디드공학회논문지
• /
• 제9권4호
• /
• pp.229-235
• /
• 2014

This paper presents an environmental navigation system which provides a guidance to the users of smart bicycle for a pollution-free route during their travel. The smart bicycle operates as a sensor node being composed of a distributed wireless sensor network over the whole urban area. Several environmental sensors measuring the amount of dust, CO, $CO_2$, $NO_2$ in the air are built into the smart bicycle to estimate the level of air pollution in the located area. Each smart bicycle sends/receives the measured sensor data and the city pollution map to/from the centralized server, which leads the bike-riders to a healthy route by providing the environmental navigation information. The proposed idea and its implementation give a useful insight on various application services with the distributed smart bicycles.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.305-312
• /
• 2021

There is a gradual increase in the need for energy charging in marine environments because of energy limitations experienced by electric ships and marine robots. Buoys are considered potential energy charging systems, but there are several challenges, which include the need to maintain a fixed position and avoid hazards, dock with ships and robots in order to charge them, be robust to actions by birds, ships, and robots. To solve these problems, this study proposes a smart buoy robot that has multiple thrusters, multiple docking and charging parts, a bird spike, a radar reflector, a light, a camera, and an anchor, and its mechanism is developed. To verify the performance of the smart buoy robot, the position control under disturbance due to wave currents and functional tests such as docking, charging, lighting, and anchoring are performed. Experimental results show that the smart buoy robot can operate under disturbances and is functionally effective. Therefore, the smart buoy robot is suitable as an energy charging system and has potential in realistic applications.

• Journal of information and communication convergence engineering
• /
• 제20권1호
• /
• pp.65-72
• /
• 2022

With the mark of the fourth industrial revolution, the smart factory is evolving into a new future manufacturing plant. As a human-machine-interactive tool, augmented reality (AR) helps workers acquire the proficiency needed in smart factories. The valuable data displayed on the AR device must be delivered intuitively to users. Current AR applications used in smart factories lack user movement calibration, and visual fiducial markers for position correction are detected only nearby. This paper demonstrates a marker-based object detection using perspective projection to adjust augmented content while maintaining the user's original perspective with displacement. A new angle, location, and scaling values for the AR content can be calculated by comparing equivalent marker positions in two images. Two experiments were conducted to verify the implementation of the algorithm and its practicality in the smart factory. The markers were well-detected in both experiments, and the applicability in smart factories was verified by presenting appropriate displacement values for AR contents according to various movements.

• 한국인터넷방송통신학회논문지
• /
• 제13권3호
• /
• pp.177-181
• /
• 2013

최근 NFC(Near Field Communication) 기반의 통신 기능을 채용한 스마트기기 및 OS 등이 확산되면서, 기존의 RFID를 이용한 다양한 응용분야가 NFC로 대체되고 있다. Smart NFC 기술은 기존 서비스 및 기기와 쉽게 융 복합이 가능하며, 스마트폰을 활용한 결제 의료 인증 등 새로운 Network Communication 패러다임의 창출이 예상되고 있다. Smart NFC 보안 인증기기(Smart NFC Security Authenticator: SNSA)의 H/W와 S/W를 개발하고, 무선통신 시험 결과 허용기준값 이내를 만족하고, 토폴로지 영향의 실험 및 분석 결과, Daisy Chain 토폴로지가 Star 토폴로지에 비해 신호성능이 우수함을 보였다.