• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.223-228
• /
• 2015

In this paper, the study of the optimum design for a geometry of the handle bar to obtain a high stiffness and light weight is investigated, using EDISON simulation program. High stiffness and weight lightening are considered as the major performance indicators of the component of the bicycle. Four design factors and three levels of the design factors are selected for the structural optimization and experiments are designed using the orthogonal array of L9 by Taguchi method. We calculated SN ratio of larger-the-better and smaller-the-better characteristics from FEA results and analysed the effects of design factors on characteristics. We choosed the optimum level of design factors based on deflection and safety factor. Comparing the results of FE analysis with converted value of predicted SN ration, we made sure for reliability of Taguchi method and FE method for structural optimization.

• Korean Journal of Hydrosciences
• /
• 제5권
• /
• pp.85-97
• /
• 1994

A hybrid finite difference method for the longitudinal dispersion equation, which is based on combining the Holly-Preissmann scheme with fifth-degree Hermite interpolating polynomial and the generalized Crank-Nicholson scheme, is described and comparatively evaluated with other characteristics-based numerical methods. Longitudinal dispersion of an instantaneously-loaded pollutant source is simulated, and computational results are compared with the exact solution. The present method is free from wiggles regardless of the Courant number, and exactly reproduces the location of the peak concentration. Overall accuracy of the computation increases for smaller value of the weighting factor, $\theta$of the model. Larger values of $\theta$ overestimates the peak concentration. Smaller Courant number yields better accuracy, in general, but the sensitivity is very low, especially when the value of $\theta$ is small. From comparisons with the hybrid method using cubic interpolating polynomial and with splitoperator methods, the present method shows the best performance in reproducing the exact solution as the advection becomes more dominant.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.935-941
• /
• 2020

In this study, the effect of different shapes on the heat dissipation characteristics of other porous frames on LED lighting frames was studied using finite element analysis. In addition, the heat transfer characteristics of LED frames were tested using a thermal imaging camera and the results of finite element analysis were compared to derive the optimal hole shape. According to the study, the heat dissipation effect was better for frames with hole compared to existing ones without holes. In particular, the heat dissipation characteristics test showed that for frames with holes, the rise time to the maximum temperature is fast and the maximum temperature is significantly lower. Also, we could see that the square and diamond shapes were smaller than the circular pores, but had a greater heat dissipation effect. Through this study, we have concluded that there is a limit to increasing the heat dissipation effect of the frame with a perforated shape, and it is necessary to conduct further research on the change in the shape of the frame in order to achieve a better heat dissipation effect in the future.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2000

The study on industrial accidents in Korea has been focused on frequencies of each type, severity, characteristics, causes, and so on. Those attributes of industrial accidents were usually analyzed independently, so that it was hard to provide a systematic guidelines for efficient safety management. Therefore, there were a few of studies based on comprehensive survey results in terms of characteristics of safety management. This study aimed to figure out the characteristics of current safety management and to provide a guideline for ideal safety management in industry. The questionnaire survey carried out for the workers(695) who were in charge of safety management at their industries. The multivariate analyses as well as descriptive statistical analysis were conducted. The factor analysis showed that there were three factors of safety management. They were 1) investment and management for accident prevention, 2) safety manager, and 3) general health and environmental condition. The industries of respondents were clustered into three groups. Three groups showed a statistically significant differences on the number of cases reported and the trends of accident. Actually, the group with the larger investment and better management of accident prevention had a smaller number of accident cases.

• 한국가시화정보학회지
• /
• 제20권2호
• /
• pp.38-44
• /
• 2022

Due to increasingly strict emission regulations for carbon-based fuels in the shipping industry, there is a significant motivation to investigate the alternative fuel. Ammonia is one of the attractive alternative fuels as a carbon-free fuel. Since ammonia has different properties such as high vapor pressure and low boiling point compared to conventional fuels, further research into ammonia spray behavior is important. In this work, the spray characteristics of ammonia and other fluids (ethanol, n-decane) were compared by using numerical simulation. The results show that the spray characteristics of ammonia differs from those of the others due to the occurrence of flash boiling. The narrow-dispersed spray with accelerated velocity at the center have been observed for ammonia. It is also found that droplets of ammonia achieve smaller diameter with more uniform distribution, leading to better atomization behavior compared to the others.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.135-138
• /
• 2002

VCO(Voltage Controlled Oscillator) is one of the main components governing the size, performance and power consumption of telecommunication devices. As the devices become much smaller, VCO need to have much smaller size with better characteristics. Buried type passive components of L,C,R were developed previously and the structure of these components are good for minimizing the size of VCO. Our own library of passive components is used in simulation and fabrication of VCO circuit, and surface mounted components like varactor diode are analysed using the measurement circuit designed by ourselves. Two-Dimensional simulation of VCO circuit and local three-Dimensional structure simulation are performed and their relation is obtained. In structure of multi-layered VCO, some components governing the characteristics of VCO are selected and placed on the top of oscillator for the good tuning process. In resonator part, the stripline structure and low loss glass/ceramic material are used to get higher Q value. In our research, a VCO oscillates in the 2.3∼2.36 GHz band is developed.

• 마이크로전자및패키징학회지
• /
• 제8권1호
• /
• pp.61-64
• /
• 2001

VCO(Voltage Controlled Oscillator)는 통신용 단말기의 크기, 성능 및 전력 소비를 결정하는 중요한 부품중의 하나이다. 통신용 기기의 크기가 점점 작아지고 있는 추세이기 때문에 VCO도 특성의 저하없이 점점 소형화 되고 있다. VCO 모듈을 개발하기에 앞서 회로에 사용되는 수동소자(L,C,R)들에 대한 연구가 진행되었다. 이 과정에서 작은 면적을 차지하면서도 동일한 특성을 나타낼 수 있는 패턴을 고안하였고 이를 적용하였다. 자체 개발된 수동소자 library를 가지고 2차원 simulation을 시행하였고 이를 바탕으로 3차원 회로를 구성하였다. 3차원 회로 구성시 VCO 전체 특성에 크게 영향을 주는 소자들은 trimming이 가능하도록 surface 쪽으로 배치하였다. 공진기 부분에서는 저손실의 stripline 구조를 적용하여 높은 Q값을 얻을 수 있었다. 이러한 과정을 통해 2.3~2.36 GHz에서 동작하는 적층형 VCO를 개발하였다.

• 오토저널
• /
• 제10권6호
• /
• pp.25-38
• /
• 1988

As a mean of increasing engine power, great attention has been concentrated on the turbo-charging owing to better fuel economy, smaller engine size and lower emission. The performance in turbocharged engine depends not only on the efficiency of the engine and the turbocharger used, but also on the total characteristics of the system by the matching turbocharger to the engine. The matching of the turbocharger to the engine has been usually accomplished by the empirical techniques with a great deal of laborious work. It would be better to predict the performance and emission in the turbocharged engine using the effective simulation model. In this study, computer simulation program has been developed to predict the transient variation of properties of gas in the cylinder, intake and exhaust pipes, the engine performances and emissions.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.464-469
• /
• 2019

In this study, the electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and polyethylene synthesized by an extrusion process was evaluated. The MWCNTs used exhibited differences in their dispersion characteristics depending on the type of catalyst or synthesis gas used. Thus, the choice of catalyst or synthesis gas significantly affect the physicochemical state of the final MWCNTs and MWCNT-based composites. In this investigation, the characteristics of MWCNTs were analyzed in four cases by introducing ethylene and propylene gas to each catalyst synthesized using deposition precipitation and spray drying methods. The MWCNT-based composites synthesized using the catalyst prepared by deposition precipitation and the ethylene synthesis gas showed the best electrical conductivity. In principle, the morphologies of the MWCNTs indicate that the smaller the aggregate size and bundle thickness, the better the electrical conductivity of the MWCNT composites. This implies that the network is well-formed.