1 |
Fan, Y., Ohtomo, M., Kasuga, S., Iki, N., Kurata, O., Tsujimura, T., & Furutani, H., 2021, "Characteristics of Ammonia Spray Injected by Pressure-Swirl Atomizers," In International Conference on Liquid Atomization and Spray Systems (ICLASS), Vol. 1, No. 1.
|
2 |
Lucchini, T., D'Errico, G., & Ettorre, D., 2011, "Numerical investigation of the spray-mesh-turbulence interactions for high-pressure, evaporating sprays at engine conditions," Int. J. Heat Fluid Flow, Vol. 32(1), pp. 285-297.
DOI
|
3 |
Yan, J., Gao, S., Liu, W., Chen, T., Lee, T. H., & Lee, C. F., 2021, "Experimental study of flash boiling spray with isooctane, hexane, ethanol and their binary mixtures," Fuel, Vol. 292, pp. 120415.
DOI
|
4 |
Li, X., Li, T., & Xu, M., 2019, "Effect of ambient temperature on flash-boiling spray characteristics for a multi-hole gasoline injector" Exp. Fluids, Vol. 60(7), pp. 1-12.
DOI
|
5 |
Zeng, W., Xu, M., Zhang, Y., & Wang, Z., 2013, "Laser sheet dropsizing of evaporating sprays using simultaneous LIEF/MIE techniques," Proc. Combust. Inst., Vol. 34(1), pp. 1677-1685.
DOI
|
6 |
Senecal, P. K., Pomraning, E., Richards, K. J., & Som, S., 2012, "Grid-convergent spray models for internal combustion engine CFD simulations," Proc. ASME Fall Conference, Vol. 55096, pp. 697-710.
|
7 |
Mohan, B., Yang, W., Yu, W., & Tay, K. L., 2017, "Numerical analysis of spray characteristics of dimethyl ether and diethyl ether fuel," Applied Energy, Vol. 185, pp. 1403-1410.
DOI
|
8 |
Guo, H., Ding, H., Li, Y., Ma, X., Wang, Z., Xu, H., & Wang, J., 2017, "Comparison of spray collapses at elevated ambient pressure and flash boiling conditions using multi-hole gasoline direct injector," Fuel, Vol. 199, pp. 125-134.
DOI
|
9 |
Yang, S., Wang, T., Jia, M., Shen, S., & Yao, Z., 2016, "An experimental study on microscopic characteristics of flash boiling spray with extended glare point velocimetry and sizing," At. Sprays, Vol. 26(5).
|
10 |
Park, G., & Cho, K., 2017, "A study on the change of EEOI before and after modifying bulbous at the large container ship adopting low speed operation," J. Mar. Eng. Technol., Vol. 41(1), pp. 15-20.
DOI
|
11 |
Nakamura, H., Hasegawa, S., & Tezuka, T., 2017, "Kinetic modeling of ammonia/air weak flames in a micro flow reactor with a controlled temperature profile. Combustion and Flame," Vol. 185, pp. 16-27.
DOI
|
12 |
Garabedian, C. G., & Johnson, J. H., 1966, "The theory of operation of an ammonia burning internal combustion engine," ARMY TANK-AUTOMOTIVE CENTER WARREN MI.
|
13 |
Pele, R., Mounaim-Rousselle, C., Brequigny, P., Hespel, C., & Bellettre, J., 2021, "First study on ammonia spray characteristics with a current GDI engine injector." Fuels, Vol. 2(3), pp. 253-271.
DOI
|
14 |
Kramer, M., Kull, E., & Wensing, M., 2016, "Flashboiling-induced targeting changes in gasoline direct injection sprays," Int. J. Engine Res., Vol. 17(1), pp. 97-107.
DOI
|
15 |
Chang, M., Lee, Z., Park, S., & Park, S., 2020, "Characteristics of flash boiling and its effects on spray behavior in gasoline direct injection injectors: A review," Fuel, Vol. 271, pp. 117600.
DOI
|
16 |
Parod, R. J., 2014, Ammonia, Academic Press, Cambridge, Massachusetts, pp. 206-108.
|
17 |
Kim, D., Martz, J., & Violi, A., 2016, "Effects of fuel physical properties on direct injection spray and ignition behavior, Fuel, Vol. 180, pp. 481-496.
DOI
|
18 |
Zhao, W., Yan, J., Gao, S., Lee, T. H., & Li, X., 2022, "Effects of fuel properties and aerodynamic breakup on spray under flash boiling conditions," Appl. Therm. Eng., Vol. 200, pp. 117646.
DOI
|