• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.89-101
• /
• 2005

The bricks in Myung Dong Cathedral Church are now deteriorated by the weather such as temperature, humidity, and winds. Thus it is necessary to replace the old bricks to the restored bricks for the load bearing capacity as well as to prevent the penetrations of rains from outside. However the mortar composition is not well defined at this moment and there are literary about the mortar completions. Thus it is necessary to verify the mortar compactions between old bricks and results to bring the restoring the mortar for the replace of new bricks. The particles of mortar was collected from Myung Dong Cathedral Church and particle size was analyzed by the mortar and pestle and mechanicle floater. The X-ray diffraction and XRF of each particles are analyzed. The quartz and feldspar such as albite, kaolinite are observed in large particles(>1mm). However, the clicite was observed at lower than $43{\mu}m$ particles. In XRF analysis, the $SiO_2\;and\;K_2O$ are observed at large particles$(1mm-208{\mu}m)\;and\;CaCO_3$ is observed at small particles$(208-43{\mu}m)\;and\;CaCO_3$ is observed at small particles($208-43{\mu}m$). This is well coincide with XRD results. The optimum volume ratio of lime mortar would be 1: 2 ($CaO: SiO_2$).

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.173-180
• /
• 2016

There has been a growing interest in automation of factories in the country. And, the development in this regard has been actively attempted. In particular, on the basis of the "innovation 3.0 strategy of manufacturing industry", interest in the smart of the manufacturing plant of small and medium-sized enterprises has increased rapidly. As well as policy for building smart plant, technical, seeking a strategic approach. But, in order to introduce such a smart plant or factory automation systems, manufacturing plant security with vulnerability and personal information protection problems, it should always be top priority there. Accordingly, we provide the applicable lightweight secure protocols in RFID communication. It is a wireless communication technology that is most often introduced for factory automation. Our proposed lightweight secure protocol in this study, less the number of calculations in comparison with the existing public key-based and the symmetric key encryption algorithm. And it is fast in compare with the existing protocol. Furthermore, we design that it system can support to low power consumption and small consume the memory size.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.262-267
• /
• 2008

The domestic construction market started to expand steadily since 1970s. The building market which utilizes a sandwich panel with advantages of economical construction expenses and convenient construction has grown rapidly in recent years. However, the companies which specialize in constructing sandwich panels are relatively small or medium size, compared with other construction companies. As a result, studies on the improvement of productivity have not been conducted sufficiently. In this study, the construction sites of sandwich panel are investigated, and the work processes by each team are analyzed. Additionally, the productivity and the construction cost of each construction team are analyzed by constructing a model using the Web-Cyclone. It is expected that the results of this study can be applied to estimate the productivity and the construction cost of a sandwich panel construction that is appropriate for the on-site characteristics of small and medium sized construction companies in Korea. Also, similar processes can be simulated based on the modeling constructed in this study.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.829-853
• /
• 2015

This is an experimental study to investigate the behaviour of piled raft system in different types of sandy soil. A small scale "prototype" model was tested in a sand box with load applied to the foundation through a compression jack and measured by means of load cell. The settlement was measured at the raft by means of dial gauges, three strain gauges were attached on piles to measure the strains and calculate the load carried by each pile in the group. Nine configurations of group ($1{\times}2$, $1{\times}3$, $1{\times}4$, $2{\times}2$, $2{\times}3$, $2{\times}4$, $3{\times}3$, $3{\times}4$ and $4{\times}4$) were tested in the laboratory as a free standing pile group (the raft not in contact with the soil) and as a piled raft (the raft in contact with the soil), in addition to tests for raft (unpiled) with different sizes. It is found that when the number of piles within the group is small (less than 4), there is no evident contribution of the raft to the load carrying capacity. The failure load for a piled raft consisting of 9 piles is approximately 100% greater than free standing pile group containing the same number of piles. This difference increases to about 4 times for 16 pile group. The piles work as settlement reducers effectively when the number of piles is greater than 6 than when the number of piles is less than 6. The settlement can be increased by about 8 times in ($1{\times}2$) free standing pile group compared to the piled raft of the same size. The effect of piled raft in reducing the settlement vanishes when the number of piles exceeds 6.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.9
• /
• pp.1-10
• /
• 2021

Recently, the repair and recycling of damaged mechanical parts via metal additive manufacturing processes have been industrial points of interest. This is because the repair and recycling of damaged mechanical parts can reduce energy and resource consumption. The directed energy deposition(DED) process has various advantages such as the possibility of selective deposition, large building space, and a small heat-affected zone. Hence, it is a suitable process for repairing damaged mechanical parts. The shaft is a core component of various mechanical systems. Although there is a high demand for the repair of the shaft, it is difficult to repair with traditional welding processes because of the thermal deformation problem. The objective of this study is to propose a repair procedure for a damaged shaft using the DED process and discuss its applications. Three types of cases, including a small shaft with a damaged surface, a medium-size shaft with a worn bearing joint, and a large shaft with serious damage, were repaired using the proposed procedure. The microstructure and hardness were examined to discuss the characteristics of the repaired component. The efficiency of the repair of the damaged shaft is also discussed.

• Korean Institute of Interior Design Journal
• /
• v.22 no.6
• /
• pp.151-161
• /
• 2013

This study which analyzed 4th century Constantinus basilica church architecture is on how the Roman basilica architecture became to christianized and christian architecture became romanized. Basilica architecture of Rome which has strong public characteristic had approach from various direction, especially it has formed inter communicable open space to center forum. Even though, the early christian church has became to bigger size on the process of domus ecclesia centered growth, but it has formed essencially unhierarchy community of home based, it also seemed to have loose religious community below hundred. The result of analyzing 22 of 4 century basilica churches had been shown that more than 60% of them were built on historical place such as tomb of martyr, nearly 70% of them were long axis type, the size of church showed up $3,200m^2$ of average total area. In conclusion, this study concluded the result of christianized showed closeness pursue holiness by separation from the secular world, and long axis it was revealed as mass for the procession ceremony of catholic church. The result of romanized occurred from the process that the basilica church abandoned the unhierarchy, small sizing, worship simplicity of early domus ecclesia characteristics and accept hierarchy, big sizing, worship formalism and complexity of Roman empire system in the roman basilica churches. Through this study it could be grasp that the romanized of early christianity bring not only the change of church architecture but also degeneration of christian itself.

• Proceedings of the Korean Printing Society Conference
• /
• 2001.06a
• /
• pp.63-77
• /
• 2001

PDF(Portable Document Format) is a file format that Adobe advances postscritp technique and use in managing document information or electric publishing(internet, CD-ROM, DVD). PDF is a devised document type for being able to read and print anywhere, independent of OS, printer type, resolution, and the kind of computer etc. Because this includes a compressing function, it transfers document through a small size of file in internet or intranet. In addition, that is a file format has various advantages-sharing of information and transfering documents in on line or off line environment. In this paper, we developed electronic document system using PDF format. Electronic document system consists of filter, automatic indexing, special searching system and web server. The information used in this paper is database made using Zwon\`s DocuCom. The filter recognizes various kinds of document structure. And according to property of document, it produces ASCII output. In addition to processing various formats of document, the filter can extract keywords in documents of MS WORD, Excel, Powerpoint, PDF, CAD etc. This filter uses the structure of window printer drive and can extract the information for text, page, font type and size from relevant document. The automatic indexing recognizes the formatted tag of document form ASCII text produced by filter and extracts adequate keyword to structure and property of document. PDF electronic document systems proposed in this paper can be used in Internet, PC communication. Users can choose and read electronic documents by two ways. First, users can choose and read relevant books using PDF electronic document homepage. Second, users can use PDF integrated-search system. User can search after inputing keyword and choose reference field and type of data. But, now, PDF products of Adobe can\`t support the Korean character. If this problem is resolved, we thick that PDF applications system looks active. Although there is limited function in case of using Zwon DocuCom used in this study, we think that there isn\`t a great deal of difficulty in electronic document and building digital database.

• Journal of the Korean Institute of Rural Architecture
• /
• v.20 no.2
• /
• pp.19-28
• /
• 2018

This study investigated the basic data of architectural design about framework dimensions inherent in a folk house of Yeosu city generally and systematically. We investigated the common dimensions of framework constitution for folk house (main building) seen a lot in Yeosu city. Most of the folk houses in Yeosu city were common people houses built from the end of 19th century to the 1960s and have maintained the same style for a long time. As a result of the study, common dimensions were calculated in two ways. One is Front toi/3ryang house and the other is Front/back toi/2kozu5ryang house. Front/back toi house was large in the case of full width, total height, and member thickness but, width of the front kan is no big difference. In other words, the scale of Front toi house and Front/back toi house is difference only in the rest except front kan (width). Among calculated common dimensions, the front kan of Front toi house and Front/back toi house in the plan, the kitchen is the widest, and the size is the same at 8.7 chucks degree. The next became small little by little in order of room 1(main room), room 2(center room), room 3(end room). As a result, the size of the room 3 of Front toi house reaches 7.7 chucks, and room 3 of Front/back toi house reaches 8.0 chucks. In the section dimensions, pillar height is in sum of floor height and pillar core height, Front toi house is 7.9 chucks, and Front/back toi house is 8.2 chucks. The investigation of basic data of architectural design is not only makes possible to grasp specific and simple to three-dimensional universal aspect on framework dimensions, but also documentation of folk house design know-how is done, and the architectural design standards of Korean folk house is written in the contents according to the area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2298-2319
• /
• 1999

In this paper, we propose a new moving mobile base station (MMBS) scheme for very low power and micro-size RMIMS (radio-interfaced micro information monitoring system) terminals. RMIMS terminals can be used in various application service areas such as pollution monitoring, environment surveillance, traffic monitoring, emergency monitoring (e.g., building, bridge, railroad breakdown), security monitoring (e.g., theft, alarm) and military application. For these applications based on wireless transmission technologies, sensor type RMIMS terminals must satisfy low cost and low power design (e.g., solar power, life limited battery) requirement. In RMIMS terminal design, this low power requirement limits transmission range of uplink or reverse link and means small cell size. Also these applications using RMIMS terminals may have a little bit non real-time traffic characteristic and low scattering density in service area.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.59-68
• /
• 2012

Predicting occupants' behaviors from the start of the fire to egress and reducing the time required for such process are critical matters that can decide success and failure of safe egress. In this research, research literatures and theories and fire cases were compared and analyzed so as to prepare logical grounds that could predict the process of beginning egress. As a result of this research, there was a significant difference in the time elapsed until people start evacuating due to spatial positions and quarantine from the place from which the fire originated and their auditive and olfactory signs did not recognize the fire instantly and they showed a strong tendency to recognize the fire by visual sign, warning announcement for egress and notice by others. And the results also showed that only a very small minority of occupants evacuated as soon as they perceived the fire and that variation in the time elapsed until evacuation begun for occupants were wider as the size of building was bigger and that accommodations such as hotel had wider variation in the time elapsed regardless of the size of buildings.