• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.125-129
• /
• 2004

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss, but it needs some cooling method because heat radiation between each winding is difficult. The life of transformer is significantly dependent on the thermal behavior in windings. Many transformer designers have calculated temperature distribution and hot spot point by FEM(finite element method) to analyze winding temperature rise. In this paper, the temperature distribution and thermal stress analysis of 100kVA pole cast resin transformer for power distribution are investigated by FEM program.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1135-1138
• /
• 2003

The transformer is major equipment in power receiving and substation facilities. Necessary conditions required for the transformer are compactness, lightness, high reliability, economic advantages, and easy maintenance. The pole-mount transformer installed in distribution system is acting direct role in supply of electric power and it is electric power device should drive for long term. Most of modem transformer are oil-filled transformer and accident is happening considerable. The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. One body molding transformer needs some cooling method because heat radiation between each winding is difficult. In this paper, The thermal analysis of pole mount mold transformer with one body molding by duct condition is investigated and the test result of temperature rise is compared with simulation data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1414-1417
• /
• 2004

A thick-layered RP process, transfer-type variable lamination manufacturing using expandable polystyrene foam (VLMST) has been developed to have the advantageous characteristics such as high building speed, low cost for introduction and maintenance of VLM-ST apparatus, and little staircase surface irregularities of parts. However, VLM-ST has difficulty fabricating an axisymmetric shape and a large-sized freeform shape because of the limited sloping angles and small build size. The objective of this paper is to develop a multi-functional hotwire cutting system using EPS-foam (MHC). MHC employs a four-axis synchronized hotwire cutter with the structure of two XY movable heads and a turntable. In order to examine the applicability of the developed MHC apparatus, an axisymmetric shape, a polyhedral shape and a large-sized freeform shape were fabricated on the apparatus.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.32-40
• /
• 2008

Recently, due to the onset of the information age, various high-priced, large-size machines have been invented such as intelligent building and high-tech computer operated facilities. Consequently, all kinds of electrical, electronic, and communication equipments and facilities have been found to be vulnerable even to small amounts of electrical shock. Interference between equipments and equipment malfunction occur because of various electromagnetic interferences. Galvanic action by direct current (D.C.) causes gas valve corrosion and other electrical problems such as static electricity and electromagnetic interference (EMI) occur as well. Most of the problems stated above occur because of problems in grounding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1136_1138
• /
• 2009

This paper gives a basic Energy performance data of micro gas turbine and Renewable Energy(BIPV and Solar Collector System) installed in Hospital Building. The efficiency of solar collector and BIPV system was 30%, 10% individually, and lower than micro gas turbines. Micro gas turbines are small gas turbines that burn gaseous and liquid fuels to produce a high-energy exhaust gas and to generate the electrical power. Recently the size range for micro gas turbines is form 30 to 500kW and power-only generation or in combined heat and power(CHP) systems. If micro gas turbine was operated only for electric energy, the efficiency was about 30%, but for combined heat and power, the efficiency was about 90%. Finally, installed in large hospital, Micro gas turbine system was operated to CHP mode, was high-efficiency system than Solar collector and BIPV system.

• 한국지열·수열에너지학회논문집
• /
• 제9권3호
• /
• pp.11-18
• /
• 2013

Small and medium-size buildings employ a multi-distributed individual air-conditioning system utilizing package air conditioners instead of centralized cooling systems, which can allow easier building management and maintenance along with a diversification of facility use. Inverter driven system heat pumps have been developed to achieve not only easy distribution control allowing free combination of indoor units with different models and different capacities, but also wide applications to an intelligent air conditioning. In this study, the transient performance of a system heat pump was analysed with the variation of compressor speed and EEV openings. The superheat was selected as a control parameter of the system, because the variation of it was consistent with each indoor unit capacity.

• 한국주거학회논문집
• /
• 제17권1호
• /
• pp.19-27
• /
• 2006

This research deals with the residential environment for the elderly and describes characteristics to give a positive effect on elderly's health and quality of life in Sweden. Five elderly care home recommended by a municipality staff in Stockholm are surveyed on $01\~03$ October 2003. The results of this study are as follows: 1) homelike atmosphere is regarded as a basic design concept and is applied to size, materials, scale, color, and furniture of elderly housing in Sweden, 2) regarding of the exterior features, it is similar to the ordinary house rather than institution building, 3) arrangement of spaces is planned for several small groups consisting of 6-8 residents, 4) open-space planning on public kitchen and dinning room allows residents to feel comfortable when they can hear a sound and smell a meal, 5) private flat is to provide amenities for sleeping, rest, storage, social interaction, meals, hygiene and other every activities

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.31-34
• /
• 2007

Fuel cell with high electric efficiency has many probabilities of commercial use. Especially, polymer electrolyte or proton exchange membrane fuel cell (PEMFC) which is a low operating temperature and has less influence on $CO_2$ concentration is considered the power generation system of small building and household. We calculated the optimal operational plans of 1 kW household PEMFC power system based on daily electric and heat demand patterns of various size of apartments. Calculated results show that the economic feasibility of PEMFC power system is very sensitive to the cost policy of electricity and natural gas.

• 한국산업융합학회 논문집
• /
• 제16권3호
• /
• pp.75-83
• /
• 2013

The purpose of this study was to investigate its characteristics of the spatial compositions at several kindergartens in Daegu area. Through this, the study is intended to provide the basic data of the efficient building planning and facility operations in the kindergarten. The results of this study are as follows. 1) Recently, the spatial compositions of kindergarten was classified as education, educational aids, educational support, teacher / administration, and public service area. 2) The concept of special classroom space was set up in all the surveyed facilities. This space was used for small-scale events, meals, and game features. 3) Support staff, including teachers, are insufficient for the service space. 4) The size of total land area of the facility's public service area was affecting. 5) The Lobby and aisle space of the surveyed facilities was used as a multipurpose space. 6) In response to diverse educational content, the direction to plan should be seperated by multi-space.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.83-91
• /
• 2011

The aim of this study was to determine the basic perception of Kleingarten house planning of Jeonbuk area. The survey method was used for data collection. The major finding were as follows: 1) Almost all respondents have a very positive attitude the participant of Kleingarten. Many respondents wanted the cheapest price for the Kleingarten rental fee and for the travel time between their home and Kleingarten to be under an hour. 2) Two different size of 45 and 66 $m^2$ were preferable for the house floor plans. The most preferable floor plan type chosen by the respondents was a house design with a terrace and the elderly householders especially preferred a house floor plan with an LDK design. 54.3 per cent respondents liked the log house and 93.3 per cent respondents liked the eco-friendly building materials such as wood, earth (Korean natural earth: whangto), and adobe bricks etc. 3) There were more needs for useful facilities such as a pergola, a grassy lawn, small ponds, a playground for the childrens, patio table settings, etc.