• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.63-75
• /
• 2023

Due to the development of industry, interest in air pollutants has increased. Air pollutants have affected various fields such as environmental pollution and global warming. Among them, environmental diseases are one of the fields affected by air pollutants. Air pollutants can affect the human body's skin or respiratory tract due to their small molecular size. As a result, various studies on air pollutants and environmental diseases have been conducted. Asthma, part of an environmental disease, can be life-threatening if symptoms worsen and cause asthma attacks, and in the case of adult asthma, it is difficult to cure once it occurs. Factors that worsen asthma include particulate matter and air pollution. Asthma is an increasing prevalence worldwide. In this paper, we study how air pollutants correlate with the number of emergency room admissions in asthma patients and predict the number of future asthma emergency patients using highly correlated air pollutants. Air pollutants used concentrations of five pollutants: sulfur dioxide(SO₂), carbon monoxide(CO), ozone(O₃), nitrogen dioxide(NO₂), and fine dust(PM₁₀), and environmental diseases used data on the number of hospitalizations of asthma patients in the emergency room. Data on the number of emergency patients of air pollutants and asthma were used for a total of 5 years from January 1, 2013 to December 31, 2017. The model made predictions using two models, Informer and LTSF-Linear, and performance indicators of MAE, MAPE, and RMSE were used to measure the performance of the model. The results were compared by making predictions for both cases including and not including the number of emergency patients. This paper presents air pollutants that improve the model's performance in predicting the number of asthma emergency patients using Informer and LTSF-Linear models.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.138-164
• /
• 2022

The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.182-205
• /
• 2023

The use of royal artificial flowers was finally found through schematics and records in Wonhaeng Eulmyojeongri Uigwe, which organized the procession to Hwaseong in 1795. The results of classifying the uses of artificial flowers in the brthday banquet at Bongsudang Hall in 1795 and considering the shape, user, and usage are as follows. According to literature records, artificial flowers were made with high-quality materials such as gold, silver, and silk thread in the early period, but were mainly made of paper in the later period. Artificial flowers were used for decorating official hats, Bongsudang Hall, and banquet tables. The Sagwonhwa was used for decoration of the official hats of members of the royal family, and the one on the top was called Eosam-Sagwonhwa. At the birthday banquet inBongsudang Hall, King Jeongjo and Hyegyeonggung used the Eosam-Sagwonhwa and put it on the right side of the official hats. Officials put peach blossom with two petals on the left side of the official hats for decoration. The artificial flowers for decoration of the official hats of musicians and dancers were more expensive and flashier than the officials' ones. Depending on the dance, several artificial flowers were inserted into the official hats. When measuring the size of artificial flowers, the scale used was when making a ceremonial article. For artificial flowers for decoration of the banquet hall, red and white peach blossoms were placed in two jars with dragons painted on them and them placed on two red-painted tables, respectively. The table and jar with flowers were tied together with a red cotton string and fixed so as not to fall over. The artificial flowers for decoration of the banquet table of King Jeongjo, Hyegyeonggung, and the king's sisters were a large lotus, medium-sized lotus, peony, rose, and specially made peach flowers. The artificial flowers for decoration of the banquet table of guests and officials were small lotuses and peach blossoms. The artificial flowers used in the birthday banquet at Bongsudang Hall the most were peach blossoms, and peaches had the meaning of longevity and exorcism. It is expected that the above research results will be helpful in understanding the characteristics and usage of artificial flowers in the period of King Jeongjo and use in reproducing royal feasts and producing traditional cultural contents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.731-741
• /
• 2008

Previous studies on the numerical simulation at the tidal reach of Han River tend to restrict downstream boundary as Jeon-ryu station due to difficulties in gaining cross section data and tidal elevation values at Yu-do. But, in this study, geometries beyond the confluence of Gok-reung stream and Im-jin River are constructed based on the numerical sea map; tidal elevation at the downstream boundary, Yu-do is estimated by harmonic analysis of In-cheon tide gage station so that hydrodynamic and diffusion behavior have been analyzed. The domain ranging from Shin-gok submerged weir to Yu-do is selected (which is 36.8 km in length). RMA-2 and RAM4 developed by Il Won Seo (2008) are applied to simulate flow and diffusion behavior, respectively. Numerical results of flow characteristic are compared with the measured data at Jeon-ryu station. Simulation is carried out from June 23 to 25 in 2006 on the ground that hydrologic data is satisfactory and tidal difference is huge during that period. The result shows that reverse flow occurs 5 times according to the tidal elevation at Yu-do and the maximum reverse flow is observed up to Jang-hang IC, which is 32.9 km in length. Also analysis is focused on the process of generation and disappearance of reverse flow, the distribution of water surface elevation and velocity along the maximum velocity line, and the transport of nonconservative pollutant. Pollutant injected from Gul-po stream spreads widely across the river; however, the size of BOD cloud entering from Gok-reung stream is relatively small because water depth at the mid and left side becomes deeper and maximum velocity occurs along the right bank so that transverse mixing is completed quickly. Finally, mixing characteristic of horizontal salinity distribution is obtained by estimating the salinity input with analytical solution of 1D advection-dispersion equation.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.261-267
• /
• 2007

The 20 L small chamber test method is to evaluate pollutants such as TVOC, formaldehyde emitted from building materials. This method was only designed to evaluate the surface emission of sample exposed in the chamber. In this method, building materials cut with a fixed standard size are fixed in a sample sealing box. The sample sealing box is put into the 20 L test chamber. This chamber is ventilated at a standard air change rate with purified air for 7 days then the sample from the chamber is collected and analyzed to measure the emission rate of TVOC and formaldehyde. In this method, however, if the sealing box does not guarantee airtightness, accurate evaluation for the building materials can not be achieved due to the pollutants emitted from edge of the sample so called, edge effect. This edge effect can be much greater when evaluating panels such as plywood, flooring due to their surface treatment. In this study, flooring was tested to check airtightness of the sample sealing box with analytic results between 1L and 20 L test chamber. Furniture materials like LPM coated one side surface treatment and MDF coated both sides surface treatment with LPM were tested to identify whether the improvement of the sample sealing box airtightness is possible with the comparison between existing and improved test method that low VOC emission tape was used to seal the sample edge. After 7 days, MDF TVOC emission rate was different according to the existence and nonexistence of tape. The emission rate of the existing test method was $0.009mg/m^2h$ and that of improved test method was $0.003mg/m^2h$. Relative standard deviation for the existing test method was $0.004mg/m^2h$ and relative standard deviation for the improved test method was $0.002mg/m^2h$ when the same sample was analyzed three times. The improved test method in this study using low VOC emission tape was effective and able to reduce the heterogeneous effect of the edge from the sample sealing box.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.6
• /
• pp.644-652
• /
• 2006

This study was investigated the utilization of pomegranate(P) as coagulants for 새려 manufacture, the quality characteristics and shelf-life on tofu made by P1(fruit juice of pomegranate 1%) and P2(fruit juice of pomegranate 2%) and P3(fruit juice of pomegranate 3%) and P4(fruit juice of pomegranate 4%) and P5(fruit juice of pomegranate 5%) were investigated and compared to G.D.L(C). And also, total microbe and tatal acid of the tofu were determined during storage at $0^{\circ}C^$. The results are summarized as follow P3(493.3g/500ml) compared to C(485g/500ml) showed the highest yield. Turbidity of tofu was increased as the proportion of pomegranate was increased, while pH of tofu was increased as the proportion of pomegranate was decreased. $L^{\ast}^{\ast}^{\ast}$ value of C tofu was highest, $a^{\ast}^{\ast}^{\ast}$ value of tofu was increased as the proportion of pomegranate was increased and $b^{\ast}^{\ast}^{\ast}$ value of C tofu was higher than those of other tofus. The hardness of tofu coagulated with pomegranate showed higher than that of coagulated G.D.L. The cohesiveness of P4, P5 showed higher than C tofu, but those of other tofus showed lower than C tofu. The springiness of tofu showed in the order of P4>P5>P3>P2>P1, gumminess of P5 tofu was highest. The Brittleness of tofu was increased as the proportion of pomegranate increased. The pH value of tofu coagulated with pomegranate increased during storage at $0^{\circ}C^$. During the storage period of tofu, pH and total acid showed a maximum change in C tofu. Generally the total plate counts of bacteria of all tofu increased during storage at $0^{\circ}C^$, and those of tofu with added pomegranate were shown to be lower than C tofu. The results of S.E.M(scanning electron microscopes), the lower hardness showed the more soft and the smaller particle, The particle of C tofu was small and uniformity but the size of P4, P5 tofu showed coarse. In the sensory evaluation of all tofu, sleekness, nutty, chewiness and smoothness, appearance and overall quality was the highest in C tofu. In the sensory evaluation of tofus coagulated with pomegranate. overall quality was the highest in P2.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.1
• /
• pp.85-106
• /
• 2023

This study reviewed and derived the success factors of overseas agricultural startups and studied their integrated research model. Agricultural startups and general startups have in common that poor resources and infrastructure exist from a resource-based perspective after startup, but a differentiated approach from general startups is required due to the nature of the primary industry of agriculture. In this study, we approach the company internal factors (human resources/vision/distribution network capacity/capital capacity/cultivated crops/physical resources/farming technology, etc.) and external factors (agricultural infrastructure/laws/regulations/relationship with surrounding society, etc.) We tried to build a research model that can be integrated by focusing on various existing research models, success factors, and entrepreneurship. Through this, it is intended to present an integrated model that is practically helpful to business performance to entrepreneurs, business-related persons, and researchers who need an integrated understanding of agricultural startups at home and abroad. made for purpose In this paper, a standard model was established through three types (existing agricultural startup, small and medium-sized business startup, multinational company, and comprehensive approach) according to size and characteristics for modeling agricultural startup success factors. Through this, a total of 9 success factors (agricultural management, external environment, manager/founder characteristics, corporate identity, business management, organizational culture, infrastructure, commercialization capability, and sustainable growth) were derived. The implication of this study is that the success factors of agricultural startups were comprehensively presented based on 'entrepreneurship' for various domestic and foreign agricultural startup cases. By confirming the systematic categorization, a standard model for future agricultural startup success factors was presented, and as a result, a foundation was presented for systematic research and practical effectiveness of related research in the future.

• Journal of agricultural medicine and community health
• /
• v.49 no.1
• /
• pp.37-49
• /
• 2024

Objectives: This study aimed to explore whether there are differences in smoking status between two regions of Wonju-City and Chuncheon-City, Gangwon State, and to determine whether the experience of smoking cessation programs in the region affects quit attempts. Methods: The study design was a cross-sectional study in which adults aged 19 and older living in two cities were surveyed using a pre-developed mobile app to investigate social capital for smoking cessation, and a total of 600 citizens were participated, including 310 in Wonju-City and 290 in Chuncheon-City. The statistical analysis was conducted using chi-square test and logistic regression analysis. Results: Wonju-City had a higher prevalence of current smoking than Chuncheon-City. Among smoking cessation programs operated by local public health centers, Wonju-City had a lower odds ratio for experience with smoking cessation education than Chuncheon-City (OR=0.52, 95% CI=0.33 to 0.81). When examining the effect of smoking cessation program experience on quit attempts, in Wonju-City, citizens who had completed smoking cessation education and used a smoking cessation clinic were more likely to attempt to quit than those who had not (OR=2.31 and OR=2.29, respectively). In Chuncheon-City, citizens who were aware of smoking cessation support services were 2.26 times more likely to attempt to quit smoking than those who were not, but statistical significance was not reached due to the small sample size. Conclusion: Therefore, healthcare organizations in both regions should develop more practical intervention strategies to increase smokers' quit attempts, reduce smoking rates in the community, and address regional disparities.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.146-159
• /
• 2024

In this study, a study on the production technology of the Buddha statue and the production of raw material origin was conducted through scientific analysis on the Bronze seated Bodhisattva Statue of Goseongsa Temple, a treasure. As a result of microstructure analysis through a metal microscope, it was confirmed that the microstructure of the Bronze seated Bodhisattva Statue of Goseongsa Temple was a process-type dendritic structure, and the casting structure of bronze was well represented, so it was manufactured through casting. Subsequently, as a result of analyzing the alloy composition ratio through SEM-EDS, it was identified as a ternary alloy with 81.26 wt% of copper (Cu) and 16.42 wt% of tin (Sn) and 1.72 wt% of lead (Pb). The results of the analysis of lead isotope ratios using a thermal ionization mass spectrometer (TIMS) were substituted into the distribution of lead isotope ratios on the Korean Peninsula, it was shown in corresponding to Jeolla-do and Chungcheong-do regions and North and South Gyeongsang Province. This suggests that the raw materials used in their production were likely sourced from the mines around Goseong Temple in Gangjin. Despite the fact that the statue is a medium and large Buddha with a total height of 51 centimeters, 1.72 wt% of lead (Pb) was found as a result of alloy composition ratio analysis, which showed a similar composition to the lead content ratio of small bronze and gilt-bronze Buddha statues. Therefore, we compared and analyzed the results of the analysis of the composition ratio of the alloys of bronze and gilt bronze statues, which has been scientifically analyzed with a compositional age similar to that of the Bronze seated Bodhisattva Statue of Goseongsa Temple. Comparison results, Various factors, such as the size of the Buddha statue as well as its stylistic characteristics and the age of composition, may exist in determining the alloy composition ratio of the bronze and gilt bronze Buddha statues, and it was confirmed that the alloy composition ratio or casting technology was properly adjusted when the Buddha statue was created. In other words, it is judged that a more comprehensive system of Buddha statue production technology should be investigated by conducting archaeological and art history studies on stylistic characteristics and age of composition, as well as scientific analysis results such as observation of internal structure, microstructure observation, and analysis of alloy composition ratio using radiation transmission irradiation.