• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.4-4
• /
• 2009

Paper factories use a large amount of water and same amount of wastewater is generated. It is important to recycle the wastewater because of water shortages and water pollution. The existing water treatment facilities like precipitation process need large-scale equipment and wide space to purify the wastewater of paper factory. High gradient magnetic separation (HGMS) system has the merits to purify rapidly because of large voids at filter and to occupy small space. In this paper, two types of superconducting magnets were used for HGMS systems. Cryo-cooled Bi-2223 superconducting magnet system with 70 mm room temperature bore and 200 mm of height was prepared. Cryo-cooled Nb-Ti superconducting magnet with 100 mm room temperature bore and 600 mm of height was used for magnetic separator. Magnetic filters were designed by the analysis of magnetic field distribution at superconducting magnets. The various magnetic seeding reactions were investigated to increase the reactivity of coagulation. The effects of magnetic separation of wastewater were investigated as variation of magnetic field strength and flow rate of wastewater.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.149-154
• /
• 2008

We analyzed the Coulomb stress transfer near a small-scale reverse fault. For the modeling we used the geometry of a Quaternary fault in Gyeongju area, Eupcheon fault. For an assumed reverse faulting slip of 10cm, the resulting values of the Coulomb stress change are relatively higher (>2 bar) near the edges (both downward and lateral) of the fault, and diminish slightly upward and downward. The equivalents are negative in the zone immediately below and above the fault, exhibiting a "T" shape of low stress zone in the vertical profile of the fault. This study demonstrates the possible ranges and directions the aftershock energy would propagates after a reverse faulting.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.3
• /
• pp.157-164
• /
• 2021

We describe a method for the in-orbit calibration of body-mounted magnetometers based on the CHAOS-7 geomagnetic field model. The code is designed to find the true calibration parameters autonomously by using only the onboard magnetometer data and the corresponding CHAOS outputs. As the model output and satellite data have different coordinate systems, they are first transformed to a Star Tracker Coordinate (STC). Then, non-linear optimization processes are run to minimize the differences between the CHAOS-7 model and satellite data in the STC. The process finally searches out a suite of calibration parameters that can maximize the model-data agreement. These parameters include the instrument gain, offset, axis orthogonality, and Euler rotation matrices between the magnetometer frame and the STC. To validate the performance of the Python code, we first produce pseudo satellite data by convoluting CHAOS-7 model outputs with a prescribed set of the 'true' calibration parameters. Then, we let the code autonomously undistort the pseudo satellite data through optimization processes, which ultimately track down the initially prescribed calibration parameters. The reconstructed parameters are in good agreement with the prescribed (true) ones, which demonstrates that the code can be used for actual instrument data calibration. This study is performed using Python 3.8.5, NumPy 1.19.2, SciPy 1.6, AstroPy 4.2, SpacePy 0.2.1, and ChaosmagPy 0.5 including the CHAOS-7.6 geomagnetic field model. This code will be utilized for processing NextSat-1 and Small scale magNetospheric and Ionospheric Plasma Experiment (SNIPE) data in the future.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.135-141
• /
• 2019

South Korea's smart factory drive is at a very important point. While large-scale funds and manpower are invested to secure international competitiveness and revitalize manufacturing, software investments that are only approached by IT suppliers may end up creating systems that do not meet the actual conditions of the field. As a result, there are problems in the manufacturing sector that can cause consumers to feel the fatigue of innovation in the manufacturing sector. SMEs should check from scratch and establish a gradual integration system so that they can reduce failures in IT investments and implement OT-oriented smart factories that are well utilized in the field. To this end, a process visualization solution was proposed and a step-by-step innovation was proposed at the basic level and the ICT unapplied level.

• Journal of Pharmacopuncture
• /
• v.26 no.3
• /
• pp.227-237
• /
• 2023

Objectives: Pharmacopuncture is considered a unique new type of acupuncture in Korean medicine (KM). This study was performed to investigate the research trends regarding pharmacopuncture through a bibliometric analysis using VOSviewer. Methods: The Web of Science Core Collection was searched for this study. The search terms were pharmacopuncture and pharmaco-puncture. The search was conducted on May 23, 2023, and 185 studies retrieved up to this date were included. Software VOSviewer version 1.6.19 was used to perform the bibliometric analysis. After data clearing, keyword co-occurrence and cooperation pattern analyses were performed. Results: The number of studies on pharmacopuncture have gradually increased since the mid-2000s, with the most published in 2020 (46 studies). The quality of the studies has also steadily increased, and recently, several randomized controlled trials of pharmacopuncture have been conducted. Moreover, this treatment has been investigated in the context of KM clinical practice guideline development in Korea. The scope of pharmacopuncture studies to date seems to be limited to musculoskeletal pain and bee venom pharmacopuncture. The researchers from Jaseng Medical Foundation have been the core researchers in the field of pharmacopuncture in Korea. They collaborated with researchers from universities or government-funded research institutes. However, small-scale research teams from KM clinics and university researchers were also identified as independent clusters. Conclusion: Pharmacopuncture research has grown both quantitatively and qualitatively, but the scope needs to be further expanded. There is also a gap between the use of pharmacopuncture by KM doctors in clinical settings and pharmacopuncture research. Based on these findings, some suggestions for future studies in this field are discussed. Furthermore, these findings may be used as data to expand and globalize pharmacopuncture research in the future.

• SUVANNABHUMI
• /
• v.8 no.1
• /
• pp.17-53
• /
• 2016

Debates continue to multiply on the definition and rationale of Southeast Asia as a region and on the utility of the multidisciplinary field of area studies. However, we have now entered a post-colonialist, post-Orientalist, post-structuralist stage of reflection and re-orientation in the era of globalization, and a strong tendency on the part of insiders to pose these issues in terms of an insider-outsider dichotomy. On the one hand, the study of Southeast Asia for researchers from outside the region has become fragmented. This is for very obvious reasons: the strengthening and re-energizing of academic disciplines, the increasing popularity of other non-regional multidisciplinary studies, and the entry of globalization studies into our field of vision. On the other hand, how has the local Southeast Asian academy addressed these major issues of change in conceptualizing the region from an insider perspective? In filling in and giving substance to an outsider, primarily Euro-American-Australian-centric definition and vision of Southeast Asia, some local academics have recently been inclined to construct Southeast Asia in terms of the Association of Southeast Asian Nations (ASEAN): a nation-state-based, institutional definition of what a region comprises. Others continue to operate at a localized level exploring small-scale communities and territories, while a modest number focus on sub-regional issues (the Malay-Indonesian world or the Mekong sub-region are examples). However, further reflections suggest that the Euro-American-Australian hegemony is a thing of the past and the ground has shifted to a much greater emphasis on academic activity within the region. Southeast Asia-based academics are also finding it much more important to network within the region and to capture, understand, and analyze what Chinese, Japanese, and Korean scholars are saying about Southeast Asia, its present circumstances and trajectories, and their increasingly close involvement with the region within a greater Asia-Pacific rim. The paper argues that the insider-outsider dichotomy requires considerable qualification. It is a neat way of dramatizing the aftermath of colonialism and Orientalism and of reasserting local priorities, agendas, and interests. But there might be a way forward in resolving at least some of these apparently opposed positions with recourse to the concepts of culture and identity in order to address Southeast Asian diversities, movements, encounters, hybridization, and hierarchies.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.304-311
• /
• 2023

The 4th Industrial Revolution and the continuous development of Science and Technology have also required a speedy business promotion method in the defense industry. Advanced countries including the United States are already boldly innovating the existing high-cost and long-term acquisition system with the highest priority in weapons development to cope with the military rise of Russia and China. The Ministry of National Defense and the Defense Acquisition Program Administration have also recently introduced a quick acquisition system and are applying it to business promotion. In addition, some small-scale projects and weapons systems are being reorganized so that they can be managed by the units demanding them. After an organizational diagnosis of the Project Acquisition Group by the Ministry of National Defense in 2020, it has been reassigned as a subordinate unit of the Army Logistics Command from a direct unit managed by the Army HQ. As a result, problems such as work conflict or redundancy have been identified. In addition, a system has been implemented to shorten the acquisition period by applying a rapid acquisition program in the field of weapons systems by benchmarking the rapid acquisition program of advanced countries. The force support system project process will also need to introduce such a quick acquisition system. In addition, the Ministry of National Defense is considering ways to delegate some weapon systems to each military, which will then carry out tasks ranging from requirements determination to project management. Accordingly, it is now time to expand the organization for the management of the Army's weapons system acquisition project. Therefore, in this paper, the Army Project Acquisition Group was analyzed on its organization, acquisition procedures, and cooperation systems, with presentations of development plans for each field.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.267-272
• /
• 2024

This review explores recent advancements in microfluidic crystallization techniques utilizing energy from external sources on a small scale. We focus on four representative types of external sources: ultrasound, laser, microwave, and electric field, emphasizing their impact on crystal formation. This highlights the benefits of using external sources in crystallization, such as improved crystal quality, structure formation, and changes in physical properties. Providing a comprehensive overview of crystallization techniques employing external sources, the paper discusses the potential developments in the field of crystallization through the application of these external energy sources.

• Korean Journal of Remote Sensing
• /
• v.39 no.1
• /
• pp.47-63
• /
• 2023

Unmanned aerial vehicle (UAV) and sensor technologies are rapidly developing and being usefully utilized for spatial information-based agricultural management and smart agriculture. Until now, there have been many difficulties in obtaining production information in a timely manner for large-scale agriculture on reclaimed land. However, smart agriculture that utilizes sensors, information technology, and UAV technology and can efficiently manage a large amount of farmland with a small number of people is expected to become more common in the near future. In this study, we evaluated the productivity of forage maize grown on reclaimed land using UAV and sensor-based technologies. This study compared the plant height, vegetation cover ratio, fresh biomass, and dry biomass of maize grown on general farmland and reclaimed land in South Korea. A biomass model was constructed based on plant height, cover ratio, and volume-based biomass using UAV-based images and Farm-Map, and related estimates were obtained. The fresh biomass was estimated with a very precise model (R² =0.97, root mean square error [RMSE]=3.18 t/ha, normalized RMSE [nRMSE]=8.08%). The estimated dry biomass had a coefficient of determination of 0.86, an RMSE of 1.51 t/ha, and an nRMSE of 12.61%. The average plant height distribution for each field lot was about 0.91 m for reclaimed land and about 1.89 m for general farmland, which was analyzed to be a difference of about 48%. The average proportion of the maize fraction in each field lot was approximately 65% in reclaimed land and 94% in general farmland, showing a difference of about 29%. The average fresh biomass of each reclaimed land field lot was 10 t/ha, which was about 36% lower than that of general farmland (28.1 t/ha). The average dry biomass in each field lot was about 4.22 t/ha in reclaimed land and about 8 t/ha in general farmland, with the reclaimed land having approximately 53% of the dry biomass of the general farmland. Based on these results, UAV and sensor-based images confirmed that it is possible to accurately analyze agricultural information and crop growth conditions in a large area. It is expected that the technology and methods used in this study will be useful for implementing field-smart agriculture in large reclaimed areas.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.132-137
• /
• 2009

The purpose of this study was to suggest urban regeneration methods for deteriorated downtown residential area, considering the development condition of urban blocks. Through the research that are based on literature, field survey, urban planning map and local experts consulting, it found out suitable sites for development such as a deteriorated residential zone or a unused site and it was deduced eight development types from analyzing the characters of developable sites. And then it is suggested various housing forms which were applied to eight development types of developable sites. The consequences of this research are summarized as follows. There are various housing forms by eight development types; block housing, low rise-high density court housing, medium low rise-high density housing, urban housing for low-income groups belong to T1-development of urban strategic position; block housing, housing on hilly site, semi-detached house, lodging house, urban housing for low-income groups, elderly housing belong to T2-development for living benefit; block housing, low rise-high density court housing, housing on hilly site, low rise housing, lodging housing, urban housing for low-income groups, elderly housing belong to T3-development of a small-scale rental housing; block housing, low rise-high density court housing, medium low rise-high density housing, terrace-house, housing on hilly site, low rise housing, block-typed detached house, semi-detached house, cluster-typed low rise housing, town house, urban housing for low-income groups belong to T4-residential environment renewal development; terrace-house, housing on hilly site, low rise housing, block housing, semi-detached house belong to T5-development of a small-scale housing; terrace-house, housing on hilly site, low rise housing, cluster-typed low rise housing belong to T6-development to adapt natural environment; block housing, low rise-high density court housing, low rise housing, block-typed detached house, town house belong to T7-development for community; block housing, low rise-high density court housing block housing, medium low rise-high density housing, terrace-house, housing on hilly site, low rise housing, elderly housing belong to T8-development of environment-friendly.