• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.809-817
• /
• 2020

In the design and development process of Small-Sat power distribution and transmission module, the stability of dynamic resources was evaluated by a deep learning algorithm. The requirements for the stability evaluation consisted of the power distribution function of the power distribution module and demand module to the SAR radar in Small-Sat. To verify the performance of the switching power components constituting the power module PDM, the reliability was verified using a dynamic neural network. The adoption material of deep learning for reliability verification is the power distribution function of the payload to the power supplied from the small satellite main body. Modeling targets for verifying the performance of this function are output voltage (slew rate control), voltage error, and load power characteristics. First, to this end, the Coefficient Structure area was defined by modeling, and PCB modules were fabricated to compare stability and reliability. Second, Levenberg-Marquare based Two-Way NARX neural network Sigmoid Transfer was used as a deep learning algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1222-1228
• /
• 2008

A small satellite, DubaiSat-1 FM(Flight Model), which is based on SI-200 standard bus platform and scheduled to be launched in 2008, is being developed by Satrec Initiative and EIAST(Emirates Institution for Advanced Science and Technology). The TCS(Thermal Control Subsystem) of DubaiSat-1 FM has been designed to mainly utilize passive thermal control in order to minimize power consumption, but the active control method using heaters has been applied to some critical parts. Also, thermal analysis has been performed for DubaiSat-1's mission orbit using a thermal analysis model. The thermal design is modified and optimized to satisfy the design temperature requirements for all parts according to the analysis result. The thermal control performance of DubaiSat-1 FM is verified by thermal vacuum space simulation, consisting of thermal cycling and thermal balance test. Also, to validate the thermal modeling of DubaiSat-1 FM, comparison of test results with analysis has been performed and model calibration has been completed.

• Advances in aircraft and spacecraft science
• /
• v.6 no.5
• /
• pp.427-442
• /
• 2019

Small satellites represent an emerging opportunity to realize a wide range of space missions at lower cost and faster delivery, compared to traditional spacecraft. However, small platforms, such as CubeSats, shall increase their actual capabilities. Miniaturized electric propulsion systems can provide the satellite with the key capability of moving in space. The level of readiness of miniaturized electric propulsion systems is low although many concepts have been developed. The present research intends to build a flexible test platform for the assessment of selected small propulsion systems in relevant environment at laboratory level. Main goal of the research is to analyze the mechanical, electrical, magnetic, and chemical interactions of propulsion systems with the modern CubeSat-technology and to assess the performance of the integrated platform. The test platform is a 6U CubeSat hosting electric propulsion systems, providing mechanical, electrical and data interfaces, able to handle a variety of electric propulsion systems, thanks to the ability to regulate and distribute electric power, to exchange data according to several protocols, and to provide different mechanical layouts. The test platform is ready to start the first verification campaign. The paper describes the detailed design of the platform and the main results of the AIV activities.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.315-323
• /
• 2018

CanSat has being attracted considerable attentions for the use as training purposes owing to its advantage that can implement overall system functions of typical commercial satellites within a small package like a beverage can. So-called P.P.T CanSat (Power Plant Trio Can Satellite), proposed in this study, is the name of a CanSat project which have participated in 2015 domestic CanSat competition. Its main objective is to self-power on a LED and a MEMS sensor module by using electrical energy harvested from solar, wind and piezo energy harvesting systems. This study describes the system design results, payload level function tests, flight test results and lessons learned from the flight tests.

• Advances in aircraft and spacecraft science
• /
• v.9 no.3
• /
• pp.195-215
• /
• 2022

The increasing interest in CubeSat platforms ant their capability of enlarging the frontier of possible missions impose technology improvements. Miniaturized electrical propulsion (EP) systems enable new mission for multi-unit CubeSats (6U+). While electric propulsion systems have achieved important level of knowledge at equipment level, the investigation of the mutual impact between EP system and CubeSat technology at system level can provide a decisive improvement for both the technologies. The interaction between CubeSat and EP system should be assessed in terms of electromagnetic emissions (both radiated and conducted), thermal gradients, high electrical power management, surface chemical deposition, and quick and reliable data exchanges. This paper shows how a versatile CubeSat Test Platform (CTP), together with standardized procedures and specialized facilities enable the acquisition fundamental and unprecedented information. Measurements can be taken both by specific ground support equipment placed inside the vacuum facility and by dedicated sensors and subsystems installed on the CTP, providing a completely new set of data never obtained before. CTP is constituted of a 6U primary structure hosting the EP system, representative CubeSat avionics and batteries. For the first test campaign, CTP hosts the ambipolar plasma propulsion system, called Regulus and developed by T4I. After the integration and the functional test in laboratory environment, CTP + Regulus performed a Test campaign in relevant environment in the vacuum chamber at CISAS, University of Padua. This paper is focused on the test campaign description and the main results achieved at different power levels for different duration of the firings.

• Journal of Engineering Education Research
• /
• v.24 no.5
• /
• pp.38-45
• /
• 2021

The CanSat was designed as an educational satellite simulation program that implements the overall system of the satellite such as the command processing unit, the communication unit, and the power unit in a structure of the size of a can. In particular, the training effect is very excellent because the trainee can learn a process similar to the actual satellite development process by designing, manufacturing, testing, and launching. Republic of Korea Air Force Academy has been using the CanSat production kit used by the domestic can satellite contest experience department for education, but since it was produced based on PCB, it was impossible to show creativity and operation was restricted even with small mistakes. In this paper, we analyze the existing CanSat kit and propose a new educational CanSat kit that can be used in creative engineering design and practice subjects that will be reorganized into a regular course from 2021, and a lesson plan. In conclusion, by using the proposed CanSat kit for lectures, it is possible to achieve educational purposes and effects, improve lecture satisfaction, and provide stable instruction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.105-108
• /
• 2020

In this study, experiments and simulations were conducted for a 1,200-V-class trench Si insulated-gate bipolar transistor (IGBT) with a small cell pitch below 2.5 ㎛. Presently, as a power device, the 1,200-V-class trench Si IGBT is used for automotives including electric vehicles, hybrid electric vehicles, and industrial motors. We obtained a breakdown voltage of 1,440 V, threshold of 6 V, and state voltage drop of 1.75 V. This device is superior to conventional IGBTs featuring a planar gate. To derive its electrical characteristics, we extracted design and process parameters. The cell pitch was 0.95 ㎛ and total wafer thickness was 140 ㎛ with a resistivity of 60 Ω·cm. We will apply these results to achieve fine-pitch gate power devices suitable for electrical automotive industries.

• Journal of Space Technology and Applications
• /
• v.2 no.1
• /
• pp.41-51
• /
• 2022

CubeSat is a satellite platform that is widely used not only for earth observation but also for space exploration. CubeSat is also used in magnetic field investigation missions to observe space physics phenomena with various shape configurations of magnetometer instrument unit. In case of magnetic field measurement, the magnetometer instrument should be far away from the satellite body to minimize the magnetic disturbances from satellites. But the accommodation setting of the magnetometer instrument is limited due to the volume constraint of small satellites like a CubeSat. In this paper, we investigated that the magnetic field interference generated by the cube satellite was analyzed how much it can affect the reliability of magnetic field measurement. For this analysis, we used a reaction wheel and Torque rods which have relatively high-power consumption as major noise sources. The magnetic dipole moment of these parts was derived by the data sheet of the manufacturer. We have been confirmed that the effect of the residual moment of the magnetic torque located in the middle of the 3U cube satellite can reach 36,000 nT from the outermost end of the body of the CubeSat in a space without an external magnetic field. In the case of accurate magnetic field measurements of less than 1 nT, we found that the magnetometer should be at least 0.6 m away from the CubeSat body. We expect that this analysis method will be an important role of a magnetic cleanliness analysis when designing a CubeSat to carry out a magnetic field measurement.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.100-105
• /
• 2013

With the export of commercial nuclear power plants to UAE and that of a research reactor to Jordan, as well as the additional construction of domestic nuclear power plants, the demand of nuclear manpower is expected to increase sharply. Accordingly, nuclear manpower development is recently becoming an important issue. Major institutes involved in nuclear programs are well equipped with education and training procedures and resources. However, small and medium sized businesses have difficulties to educate their employees due to their limited resources and capacity for the education. Addressing the difficulties, this study is intended to develop and education course in accordance with the "Systematic Approach to Training (SAT)". For this, a survey is conducted on the need of education in small and medium sized businesses, based on which a pilot course on the basics of radiation is developed and operated. An assessment on the development and operation using a survey regarding participants response has shown high grades of performance, i.e. above 4.0 points (full mark: 5.0 points) on each level of expectancy, satisfaction and lecturers' capacity. The experience from this study will be used to develop other programs of nuclear power and ASME code, which are also identified from the need analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.487-494
• /
• 2019

A Small-Sat Power System Design and Development should be depend on space environment such as solar wind with Electromagnetic field by hurdle of techniques. It is surmount solution of trend that will unitize and converge with power module in these days. The level of modularize means that applying Universal Middleware for payload power module requirements. The scope of target system is a main power provider module and operational subunit that can be implemented with the final power module distribution loads to consume for continuous process. A Universal Middleware strengthen to build power module from satellite power system should be accuracy and consuming data. A Power Service Module and dynamic system drive interactive management between power distribution and consumer module by Range Control. Consequently, suggesting evaluation, unexpecting payload system power consumer that makes fine variable resources in the development design process and efficiency.