• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.605-612
• /
• 2008

The shear wave velocity ($V_s$) has been commonly used to evaluate the dynamic properties of soil. The field $V_s$ probe (FVP) was already developed to assess the shear stiffness of a soft clay. The objective of this study is to investigate the disturbance effects of the FVP due to the penetration. The laboratory tests are conducted in a large-scale consolidometer (calibration chamber). The reconstituted clay is mixed at the water content of 110% using a slurry mixer. The FVP and down-hole test are carried out every 1cm interval to compare the data. In addition, two square rods with transducers are also implemented to get the reference value. The shear waves evaluated by the FVP, dow-hole tests, and reference rods are closely matched. This study suggests that the disturbance effect of the FVP due to the penetration into the soft clay soils is small enough and the $V_s$ evaluated by the FVP reflects well the in-situ characteristics. Furthermore, the combination of the FVP and down-hole test shows the possibility of hybrid equipment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.609-612
• /
• 2008

The solid immersion lens (SIL) based near-field recording (NFR) system is considered as one of the high density optical data storage system. For the NFR servo system, tracking servo control is a difficult technology to maintain extremely small gap between SIL and media within one twentieth. This is because the track pitch is decreased for increasing the recording density. In this paper, we propose disturbance observer (DOB) and internal model principle (IMP) for disturbance rejection due to eccentricity of disk. The performance of tracking controller using DOB is increased by about 85%, 94%, 97% using Q filters that have bandwidths of 50Hz, 125Hz, 250Hz, respectively. Moreover, IMP based controller is effectively reduced the residual error.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.11
• /
• pp.535-543
• /
• 2002

Modern power grids are becoming more and more stressed with the load demands increasing continually. Therefore large stressed power systems exhibit complicated dynamic behavior when subjected to small disturbance. Especially, it is needed to analyze special conditions which make small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability and operating conditions can be identified well using node-focus point and 1:1 resonance point. Also, the weak point which limits operating range is found by the analysis of resonance condition, and it is shown that reactive power compensation may solve the problem in the weak points. The proposed method is applied to test systems, and the results illustrate its capabilities.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.82-87
• /
• 1997

This paper presents a method about the modeling of the medium - small diesel engine for the speed control and designs the robust speed control system by the $\mu$-synthesis, which has good performance, in spite of the existence of model uncertainities and the external disturbance. We confirmed the validity of the proposed modeling method and the designed control system by $\mu$-synthesis through the experimental responses.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.6
• /
• pp.376-382
• /
• 1988

A small-signal low-frequency disturbance of the input line affects the regulated-output voltage of the series resonant converter. To mitigate the detrimental effect, the output feedback PI-controller is employed. Small-signal linear models are represented to characterize the closed loop series resonant converter system. Design equations for the PI-controller which satisfy stability and percent ripple conditions are derived from the closed-loop linear model. Experimental results are presented which show excellent correlation with theory.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.149-157
• /
• 2001

A nonlinear speed control for a permanent magnet synchronous motor (PMSM) using a simple disturbance estimation technique is presented. By using a feedback linearization scheme, the nonlinear motor model can be linearized in a controllable canonical form, and the desired speed dynamics can be obtained based on the linearized model. This technique, however, gives an undesirable output performance under the mismatch of the system parameters and load conditions. To cancel disturbance by parameter variation, the controller parameters will be estimated by using a disturbance observer theory where the disturbance torque and flux linkage are estimated. since only the two reduced order observers are used for the parameter estimations, the observer designs are considerably simple and the additional load for computation of the controller is negligibly small. The proposed control scheme is implemented on a PMSM using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• Atmosphere
• /
• v.14 no.3
• /
• pp.3-18
• /
• 2004

A heavy snowfall event occurred over the middle part of the Korean peninsula on March 4, 2004. The numerical models of KMA failed to forecast this heavy snowfall event because this event was due to small scale disturbance by low lever convergence and atmospheric instability. The analyses for this heavy snowfall have been performed to give forecasters useful suggestions for forecasting heavy snowfall events in the future. The analyses for the snowfall event were recounted by the Hourly Korean Peninsula Analysis Weather Chart (HKPAWC) presenting on the KMA intranet system. We confirmed that warm air flows of low level into south central Korea in conjunction with strong southwesterly winds played important role in the heavy snowfall event. We suggested several check points to improve the forecast of heavy snowfall events in the future through the results of the analyses.

• Journal of ILASS-Korea
• /
• v.2 no.4
• /
• pp.29-35
• /
• 1997

Liquid film thickness is measured by $moir\acute{e}$ topography which monitored liquid surface. $Moir\acute{e}$ fringe measurement techniques share the inherent simplicity found in optical interferometric techniques have the advantage of use over a greater range of displacement. $Moir\acute{e}$ fringe are the geometric interference patterns observed when two dense line grating are superposed. Light transmitted through a fixed line grating is deviated by the liquid film surface, producing a distored image of the grating. The $moir\acute{e}$ fringe produced by projection of this optically distored grating onto a second stationary grating permit visualization of the liquid surface and measurement of the liquid film thickness. This study measured the small amplitude of liquid film thickness to the $moir\acute{e}$ fringe pattern produced when spherical metal was dropped glycerin put)1 And the measurement of liquid film thickness flowing down an inclined plate are required to calculate the liquid slope in a position.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1110-1122
• /
• 2018

This paper proposes an alternative method to evaluate the effect of wind power to the power system stability with small disturbance. Alternatively, available techniques for stability analysis of a power system based on deterministic methods are less accurate for high penetration of wind power. Numerical simulations of random behaviors are computationally expensive. A stochastic stability index (SSI) is proposed for the power system stability evaluation based on the theory of stochastic stability and energy function, specifically the stochastic derivative of the relative well-defined energy function and the critical energy. The SSI is implemented on the modified nine-bus system including wind turbines under different conditions. A doubly-fed induction generator (DFIG) wind turbine is characterized and modeled using measured wind data from several sites in Thailand. Each of the obtained wind power data is analyzed. The wind power effect is modeled considering the aggregated effect of wind turbines. With the proposed method, the system behavior is properly predicted and the stability is quantitatively evaluated with less computational effort compared with conventional numerical simulation methods.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.41-49
• /
• 2014

Detection and processing techniques for small objects on seabed by the active synthetic aperture sonar can be increased the detection performance because it can be used by short sensor array in small unmanned underwater systems that are spatially constrained. But the limited conditions on constant speed and straight movement of the platform cause a large error in the number of external environmental factors and exact phase synthesis process. In this study, analyzed the applicability of active synthetic aperture processing that is mounted on such a system, and compared detection resolution change in accordance with the phase difference mismatch caused by the along track disturbance. Various simulations were performed as a coherently focus processing model by adding along track disturbance mismatched parameter on the configuring simulator. As the result, detection performance of active synthetic processing for small objects on seabed was found a number of changes by the phase difference mismatch errors according to track disturbances and S/N ratio variations.