• Current Research on Agriculture and Life Sciences
• /
• v.20
• /
• pp.83-90
• /
• 2002

Resistance to Phytophthora Capsici and horticultural characteristics of selections from the resistance sources such as PI123469, PI201234, PI201232, AC2258 (=Line 29), CM334, KC268, KC358, KC820, KC821, KC822, KC823 (Line 29), KC462, KC463, KC464 were evaluated and recorded in the process of seed increase. Selections of PI123469, PI201234, PI201232, AC2258, KC823 (Line 29 = AC2258) of them showed the highest level of resistance. A considerable difference in the level of resistance was observed between lines selected from the same sources. The variation between selections derived from the same source was thought to be attributable to natural cross-pollination that may have occurred during the seed increase. Therefore, securing self-pollinated seed by wrapping the flower buds before anthesis would be necessary to obtain genetically pore resistant lines. The next alternative would be to increase the seed in small net houses for single line or field cage.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.4
• /
• pp.57-73
• /
• 2017

The formation of the lava dam of the paleo lake blocked the entrance to the Chatancheon River on the Jeongok lava plateau and it suddenly transformed the terrestrial ecosystem into the aquatic one by the overflow. The spiders in the lava dam adapted in the wetland and evolved into water spiders that could survive by forming bubble houses. Since then, the lava dam was connected to the present Hantangang River due to the dissection and the lake became a terrestrial environment, a small area of marsh composed of primarily clay soil layer. Change in water level of the habitat and thus the extension of the terrestrial area made the species a endangered now. This study carried out frequency of occurrence, degree of wetness and plant habitats of the vascular plant in the water spider habitat. As a result of this study, total 180taxa are of 55 (30.6%) wetland plant groups and of 113 (62.8%) upland plant groups except facultative plant groups. Among the wetland plant groups, the Isachne globosa community occupied the largest area, where the water spiders were most observed. The result of this study, the classification and the types of vascular plant species, would provide useful information for the sustaining healthy wetland ecosystem and the restoration of the habitat for the water spiders.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1373-1378
• /
• 2018

In order to solve the problems such as reduction of agriculture population, aging and declining of grain self sufficiency rate, agriculture ICT convergence technology utilizing IoT technology is actively being developed. Agricultural ICT technology only concentrates on facility houses, and there is no automated control system in the field of cultivation. In this paper, we propose an irrigation control system that automatically controls the solenoid valves and water pumps in a large area with Lora wireless communication. The proposed system does not require a separate power source by using a small solar panel, and it is very convenient to install and operate supporting wireless auto setup by plug-and-play method. Therefore, it is expected that it will contribute to the reduction of labor force, quality of agricultural products, and productivity improvement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.246-248
• /
• 2021

This paper proposes a new general-purpose automatic fire detection system. And it deals with the contents of related research on how to design and develop for this system. The proposed system automatically notifies the user and the nearby fire department when a fire breaks out in a place where a fire alarm is installed. If this is the case, the nearby fire department can quickly confirm this fact and extinguish the fire at an early stage, thereby reducing human and property damage. The main targets of this system are houses and small buildings. The proposed fire alarm functions as a conventional fire alarm, and if a fire occurs, this fact is immediately transmitted to a nearby receiver through wireless data communication. The receiver in this paper communicates data using Korea's firefighting communication frequency band, and establishes one own network by installing it in various places to quickly receive fire alarm data at any time.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.75-84
• /
• 2020

Modular construction is a construction method whereby prefabricated volumetric units are produced in a factory and are installed on site to form a building block. The construction productivity can be substantially improved by the manufacturing and assembly of standardized modular units. 3D printing is a computer-controlled fabrication method first adopted in the manufacturing industry and was utilized for the automated construction of small-scale houses in recent years. Implementing 3D printing in the fabrication of modular units brings huge benefits to modular construction, including increased customization, lower material waste, and reduced labor work. Such implementation also benefits the large-scale and wider adoption of 3D printing in engineering practice. However, a critical issue for 3D printed modules is the loading capacity, particularly in response to horizontal forces like wind load, which requires a deeper understanding of the building structure behavior and the design of load-bearing modules. Therefore, this paper presents the state-of-the-art literature concerning recent achievement in 3D printing for buildings, followed by discussion on the opportunities and challenges for examining 3D printing in modular construction. Promising 3D printing techniques are critically reviewed and discussed with regard to their advantages and limitations in construction. The appropriate structural form needs to be determined at the design stage, taking into consideration the overall building structural behavior, site environmental conditions (e.g., wind), and load-carrying capacity of the 3D printed modules. Detailed finite element modelling of the entire modular buildings needs to be conducted to verify the structural performance, considering the code-stipulated lateral drift, strength criteria, and other design requirements. Moreover, integration of building information modelling (BIM) method is beneficial for generating the material and geometric details of the 3D printed modules, which can then be utilized for the fabrication.

• Journal of Distribution Science
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2013

Purpose - The development and implementation of OSS (Open Source Software) led to a dramatic change in corporate IT infrastructure, from system server to smart phone, because the performance, reliability, and security functions of OSS are comparable to those of commercial software. Today, OSS has become an indispensable tool to cope with the competitive business environment and the constantly-evolving IT environment. However, the use of OSS is insufficient in small and medium-sized companies and software houses. This study examines the need for OSS Intermediaries in the Software Distribution Channel. It is expected that the role of the OSS Intermediary will be reduced with the improvement of the distribution process. The purpose of this research is to prove that OSS Intermediaries increase the efficiency of the software distribution market. Research design, Data, and Methodology - This study presents the analysis of data gathered online to determine the extent of the impact of the intermediaries on the OSS market. Data was collected using an online survey, conducted by building a personal search robot (web crawler). The survey period lasted 9 days during which a total of 233,021 data points were gathered from sourceforge.net and Apple's App store, the two most popular software intermediaries in the world. The data collected was analyzed using Google's Motion Chart. Results - The study found that, beginning 2006, the production of OSS in the Sourceforge.net increased rapidly across the board, but in the second half of 2009, it dropped sharply. There are many events that can explain this causality; however, we found an appropriate event to explain the effect. It was seen that during the same period of time, the monthly production of OSS in the App store was increasing quickly. The App store showed a contrasting trend to software production. Our follow-up analysis suggests that appropriate intermediaries like App store can enlarge the OSS market. The increase was caused by the appearance of B2C software intermediaries like App store. The results imply that OSS intermediaries can accelerate OSS software distribution, while development of a better online market is critical for corporate users. Conclusion - In this study, we analyzed 233,021 data points on the online software marketplace at Sourceforge.net. It indicates that OSS Intermediaries are needed in the software distribution market for its vitality. It is also critical that OSS intermediaries should satisfy certain qualifications to play a key role as market makers. This study has several interesting implications. One implication of this research is that the OSS intermediary should make an effort to create a complementary relationship between OSS and Proprietary Software. The second implication is that the OSS intermediary must possess a business model that shares the benefits with all the participants (developer, intermediary, and users).The third implication is that the intermediary provides an OSS of high quality like proprietary software with a high level of complexity. Thus, it is worthwhile to examine this study, which proves that the open source software intermediaries are essential in the software distribution channel.

• Journal of architectural history
• /
• v.11 no.2 s.30
• /
• pp.37-56
• /
• 2002

The purpose of this study is to examine the changing process of the collective housing in Korea; focusing on the alteration process of the apartment housing, which became a representative housing type in Korea, nowadays. The alteration process of the apartment housing in Korea can be divided into three stages: the introduction stage, the trial stage and the settled stage. The introduction stage is the period between 1920, when the collective-housing buildings were constructed in Korea for the first time, and the Liberation of Korea(1945). The trial stage is the period between 1945 and 1975. During this period, common housing has been constructed. And the massive apartment buildings were started to be supplied after 1975. The settled stage is the period between 1975 and the present. The main scope of this study will be the introduction and trial stages, since a lot of in-depth studies have been executed on the settled stage. The history of the collective housing of Korea starts with City Housing of Seoul, in 1921. It is guessed that this housing was to be small-sized and row-housing type. The first-built, apartment-type building, in Korea, was Mikuni Apartment House, which was constructed as a boarding room of Mikuni Company. In the introduction stage, apartment buildings were built by Japanese architects, with Japanese housing style. Most of them were planned in dormitory type, and some of them were run as tenant houses. Most of them were constructed by bricks, but sometimes by timbers. Tadami was laid in every room and inside-corridor was located in the middle of the house. Although the major style of the apartment buildings was Japanese, the Korean dwellers of those apartments has been influencing the housing type of them. In the trial stage, apartment housing has been experienced in diverse ways. With the development of building technology, floor heating system was settled in apartment housing. This improved the amenities of apartment dwelling remarkably. Although some heterogeneous characteristics still remained in the apartments of Korea, in terms of housing style, the housing style of apartments has been changed into own style of Korea, in accordance with Korean people's life style. The results of this study give us some good implications regarding contemporary housing plan: First, if the unit size of a collective housing is small, the more space could be available for community activities. Second, when planning of collective housing, more concerns should be payed on surroundings. Third, more attention should be payed about low-rise apartment housing, and more land-friendly planning would be required.

• Korean Journal of Poultry Science
• /
• v.32 no.3
• /
• pp.179-186
• /
• 2005

This study was conducted to establish a comprehensive guideline for grading system of poultry meat cuts. Slaughter and further processed houses were divided into large(>70,000 heads/day), middle($50,000\~25,000$ heads/day), and small scale(<25,000 heads/day), and the production managers were asked by the Questionnaire. Most poultry meat cuts produced by larger- and middle-slaughter house were consumed by dealers, franchisee and department store in increasing order, whereas further processed poultry meat cuts(small scale) provided meals for the students in the high amount. The packaging step was best f3r the determination of grading in the large slaughter house. This survey indicated that two or more grades were proper to determine the grading in the middle slaughter house, however only two grades were proper for the others. Freshness, bruise, wound, trimming and the inclusion of foreign materials affected to the grading. Poultry meat cuts were accepted for the grading in large-slaughter house, but whole poultry carcass was accepted for the grading in the others. Most managers agreed with that the grading system was only applied for the amounts requested. They also suggested that the grading system of poultry meat cuts were necessary in near future, even though it was not urgent to apply.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.708-713
• /
• 2014

Trusses are widely used for wooden houses in the areas where wood construction in generalized for residential housings such as North America, Australian, New Zealand. In Korea, joist and rafter system is generally used because of the production cost, transportation cost and lack of experience required for truss manufacturing. In this study, roof trusses and flat trusses were manufactured by using oriented strand board (OSB) gusset plates for field assembly and tested under bending load to obtain the allowable loads. The allowable load and the actual load of 6m span roof trusses were 10.60 kN and 5.26 kN, respectively, which is regarded to be sufficient for use in construction. The allowable load and the actual load of 6m span floor flat trusses were 7.18 kN and 7.43 kN, respectively. For flat trusses, the allowable load is slightly lower than the actual load but the difference in very small, and it is thought that flat trusses can be used for construction by applying small change of structures and members.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.