• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.604-609
• /
• 2012

Our country has experienced some difficulties with clean up operation of massive marine oil pollution due to the lack of oil spill response equipments. And there was the case that a fishing vessel performed clean up operation had not received any proper payments because of its inefficient oil spill response operation. Thus, it is important to develop an efficient oil recovery equipment for small vessel and adopt it as a part of oil pollution prevention policy. These efforts could prepare oil spill response equipment in advance and use a fishing vessel registered in the affected area by massive marine oil pollution. Therefore, this study examines and adopts a suitable subject vessels as a first step for developing oil recovery system fitting with small vessels for national use.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.17-22
• /
• 2011

This study conducted wide-tank experiments and numerical calculations for a vessel in various positions such as upright and inclined by 2 and 4 degrees, with the goal of investigating the motion amplitude response of a small damaged fishing boat subject to a beam sea. Numerical calculations were conducted based on the three-dimensional source distribution method. The good agreement of the numerical calculation and experimental results confirmed that the present calculation method can be efficiently used for the initial design of a small fishing boat. In addition, while the chine-line type has been frequently adopted to improve a ship's resistance performance in the design of a small fishing boat, it is considered that the possibility of a deterioration in rolling performance should be thoroughly considered.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.86-92
• /
• 2002

The feasibility of counting number of small vessels and position in Korean waters using the panchromatic imageries derived from the IRS-1C was tested. The parameters for interpretation of satellite's imageries of small vessels were location(position), size, shape, shadow, tone, texture and pattern, height and depth, situation and association with other vessels. The position of small vessels in the sea without GCP(ground control point) was considered to be inclusive in the satellite imagery with 35 km semi-diameter, denoting rough geographical position of the vessel. The size of vessel was measured by length from stem to stern of the vessel, distinguished by following wave on the surface water. Offshore fishing vessels were separated from merchant ships by their length smaller than 100 m. The shape of vessels on panchromatic imagery of IRS-1C appeared just streamline. In case of clouds which were similar to the shape of small vessels, we were able to distinguish between vessel and cloud by shadow of cloud in the water surface. The tone of sea surface was dark black while small vessel appeared bright white. Small vessel was distinguished from the rough texture of the sea surface and the regular pattern of the waves with white capes when weather was not so good. The situation of the fishing activity was estimated by information of fishing method related to the fishing boat such as the pair trawl in the Yellow Sea.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.1
• /
• pp.49-56
• /
• 1997

It is the developing policy of fishing village of korea that the fishermen are not to leave their fishing village by the construction of abandant and rich fishing village in the social, cultural and economic side of view. The government has promoted the project to improve the fishing and agrarian village from 1992 year, but it is not so helpful to solve the problem of the island and fishing village. Therefore, it has to improve the structure of fishing village and to develope the vital and lively fishing village, Japan had enacted the special law for the promotion of out-island which was called the law for the promotion of Ri-do isalnd, and commenced to develop the Ri-do island. The law for the promotion of Ri-do island is limited to 10 years, but it was amended 10 times and Japanese government has invested as many as budget to Ri-do isalnd during 30 years. Korean government also had enacted and enforced the special law for the promotion of out-isalnd developement referring to Japanese system. However, it is neccessary at first to improve the system that the fishing village is able to develope the fishing port in order to make higher the efficiency of investment. Moverover, the earning differentials bewteen the city and the fishing village has to decrease by the developement of transport convenience and pavement of the road of the out-isalnd and remote fishing village. Otherwise, it is requested rapidily to set up the welfare policy for the aged people because the inhabitants of fishing village become to great age, and inhabitants could be at least diagnose one time every week in the good medical facilities. The ministry of marine and fisheries has to permit the sports fishing business by the small fishing vessel in order to increase the income of inhabitants of fishing village and put a lot of the fishing reefs which are constructed to 2-3 story into the sea. And then the sports fishing business will be flourish by the small fishing vessel.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1025-1030
• /
• 2016

The big problem of accidents at sea is negligent watch, it causes collision, fender bender, stranding, rollover, and sinking of fishing vessel. Most accidents happens without an eyewitness, it is difficult to identify the cause of the accident. VDR(: Voyage Data Recorder) is needed to identify a cause of the accident, the VDR is not usually used for fishing vessel because of high cost. Thus, this paper designs and develops a VDR system for fishing vessel. If the system is used, cause of a sea accident can be quickly identified. Also, a VDR system can be used for appropriate measures to fix a cause of the accident. Finally, it also can be helpful to prevent maritime accidents.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.3
• /
• pp.193-210
• /
• 1991

For the deckhouse or superstructure, attention is directed to the reduction of vibration from a human susceptibility point of view. The two basic requirements for obtaining a low vibration level in the accommodation are to ensure that excitation forces from propeller and/or main engine are small and to avoid resonance excitation of the hull and superstructure. In recent years increased attention has been directed towards the problems of vibration and noise in deckhouse, which have caused major problems with regard to the environmental quality in the living quarters for crews. Accordingly, in this paper, the characteristic of the vibration of deckhouse of fishing boat, of which the length/height ratio is also relatively high, are studied systematically with regard to the shape and modelling of deckhouse based on finite element method of 1-dimensional, 2-dimensional and 3-dimensional model. This study is divided into 4-part. 1st part is the global deckhouse vibration, 2nd part is the local deckhouse vibration, 3rd part consists of the estimation for stiffness of foundational support and 4th part is the application to TUNA LONG LINER of 416 ton class. For the global vibration analysis, the severity of the vibration depends on the longitudinal shear and bending stiffness of the deckhouse, on the vertical deckhouse support(fore, aft and sides). However, even if the design is technically sound, vibration problems may arise due to vertical or longitudinal hull girder or afterbody resonances. Author applied the method of this study to the analysis of, deep-sea fishing vessel of G.T. 416 ton class with relatively low height and long deckhouse, and investigated the vibrational characteristic of the fishing vessel with earlier structural feature. According to this investigation, the vibration, response of above vessel was confirmed of which main hull and deckhouse behave as one body. It is at the bottom of vibrational trouble which a accommodation part of the fishing vessel is raised, that is the local vibration for side wall, fore-aft wall and deck plate of deckhouse rather than thief fect of fore-aft vibration of deckhouse for above fishing vessel. and the resonance of main hull, deckhouse and driving system such as the main engine, propeller in exciting source is mainly brought up as the trouble.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.205-205
• /
• 2021

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.1
• /
• pp.50-55
• /
• 2010

The ship's heading information of hybrid GPS/EM compass were applied to the AIS of fishing vessel and examined the possibility of accuracy improvement. It is observed 453 each in AIS receiver of land among 3,982 each in AIS Rx/Tx transponder of the test ship at sea, and transmission interval according to the speed of ship is determined the 11.4% good transmitting data of the all information. In results, maximum compass error for the ship's heading of an EM compass was $19.1^{\circ}$. The variance of ship's heading owing to the speed of ship is surveyed. The COG (Course Over Ground) was changed extremely in $180^{\circ}W-179^{\circ}E$ range under 4.9knots, and in $24^{\circ}W-23^{\circ}E$ range over 4.9knots. Finally, using the ship's heading of EM compass and the COG from GPS for the autopilot system of a small fishing boat and the ship's heading information of AIS results in danger on the own ship's navigation safety and leads to make confusion both the others and VTS (Vessel Traffic Service) center. Therefore, the hybrid GPS/EM compass is identified as the best system for a small fishing boat and is allowed to offer continuously a ship's heading information with high accuracy and stability.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.53-53
• /
• 2017

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.