• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.101-107
• /
• 2010

The objective of this study was to assess the statistics and associated criteria for field-scale model used to simulate nutrient concentrations in paddy field. CREAMS-PADDY, a modified version of the field-scale CREAMS model, simulates the hydrologic, sediment, and nutrient cycles in paddy fields was applied in this study. The model was calibrated and validated using data from study rice paddy fields in Republic of Korea. The calibration statistics include mean and the minimum-maximum range associated with a "temporal window" that spans a period of several days. Because nutrient concentrations in paddy filed are typically sampled infrequently (on a weekly basis, at best) and represent only an instant in time, it is not reasonable to expect any model to simulate a daily average concentration equal to an observed value on a particular day. The 5-day window and related calibration statistics were applied in this study and the applicability of this concept was tested for field-scale water quality model. As a result of calibration and validation, the ponded water nutrient concentration values showed only small changes except the fertilization period. Because of the small changes in ponded water concentration, the size of 5-day window was too small to capture the observed values. Further study is required to establish the 5-day window calibration method for field-scale water quality modeling.

• Smart Media Journal
• /
• v.13 no.1
• /
• pp.52-59
• /
• 2024

This paper proposes a plan to improve the reception radio environment of the mobile terminal and maintain a constant reception electric field by using small cells in a small closed environment. In order to configure an efficient communication infrastructure for small cells, both ends of wireless transmission and reception of an Ethernet-based wireless video recording system are connected using an L2 switch. The small cell connected to the receiving side L2 switch shares the wireless network section of the wireless video recording system and connects to the transmitting side L2 switch. After that, when it is normally linked to FMS, a management system for small cells, through the Internet network, the output of small cells is checked. In order to verify the results, a proposed network is formed on the elevator inside the building with a poor radio wave environment, and the radio wave environment is measured before and after the small cell application in the section where the elevator operates. As a result, the main parameters of the radio wave environment in all sections of the elevator are improved, as well as a constant receiving electric field strength within the moving elevator.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.36-40
• /
• 2003

The considered satellite is supposed to operate in the earth-point mode and sun-point mode in accordance with the mission requirements. The magnetic field correction is based on the orbit geometry using a set of measured magnetic field data from the three-axis-magnetometer and its algorithm excludes the earth’s magnetic field model. Moreover, the usefulness of the proposed method is investigated throughout the simulation of KOMPSAT-1.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.4 s.33
• /
• pp.83-88
• /
• 2006

Recently, management and restoration efforts using the plants promote the disturbed habitats such as a set-asides or field boundaries. But, side effects are coming out because of using the exotic plants in restoration process. This study was conducted to select the native plant species used for restoration through the vegetation survey and plant community analysis at small stream-side in rural villages. We surveyed at two small stream-sides in open field and high land area in 2005 as a case study. Total 126 species was found at small stream side in open field area. As the result of important value' calculation, Persicaria thunbergii 23.0%, Humulus japonicus 18.6%, Phragmites communis 4.4%, Bromus japonicus 4.2%, and Rosa multiflora 3.4% were in the order of important value. Total 92 species were found at small stream side in high land area. As the result of important value' calculation, Dactylis glomerata 16.1%, Artemisia princeps var. orientalis 11.0%, Persicaria thunbergii 10.9%, Humulus japonicus 9.3%, Phragmites japonica 5.2% and Phragmites communis 3.5% were in the order of important value. We selected some plant species to use in restoration after due consideration of problems of exotic plant and high coverage and density species, and ecological process; Persicaria thunberii, Phragmites communis, Bromus japonicus, Rosa multiflora, Equisetum arvense, Digtaria sanguinalis, Impatiens textori, and Artemisia princeps var. orientalis in open field stream-side, and Artemisia princeps var. orientalis, Persicaria thunbergii, Phragmites japonica, Phragmites communis, Artemisia selengensis, Panicum bisulcatum, Rorippa indica, and Equisetum arvense at hghland stream-side. We will verify the selected native plants and plan the utilization of the native plants in restoration at stream-side in rural village.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.245-251
• /
• 1985

Distributions of seed weight were investigated with different seed sized peanut varieties planted at the same time, and germination and field emergence percentage, growth, and seed yield were compared among three seed sizes of four peanut genotypes. Field performance also was carried out to evaluate the effects of cotyledon removal on growth and yields in field with large and small seed-sized peanut varieties. The variation of seed weight of large seed-sized was wider than small seed-sized peanut variety. The larger seed showed the higher percent germination after 3 days cold treatment in laboratary and field emergence. The growth was not different with their sizes, while seed yield was related to seed size in small seed-sized genotypes. The growth of peanut such as main stem, internodes, and total branches was affected significantly by cotyledon removal, although the differences were not obvious after podding time, and in small seed-sized variety Oltangkong, the yields was decreased by cotyledon removal but not in large seed-sized variety.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.267-270
• /
• 2000

The feasibility of small linear antenna for near range wireless communications was studied. The requirement of the system are frequency range 9∼12 MHz and antenna size 15 cm. The communication range is about 15 m. The antenna input impedance is very small radiation resistance and very large capacitive reactance. The lossless impedance matching is nearly impossible, therefore lossy matching is considered. The antenna has very low radiation efficiency. The near field calculation has a large uncertainty, but the results can be used as the guideline of a small linear antenna system for a near range wireless communication.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.9-18
• /
• 2014

Small and medium-sized local airports have suffered from chronic operating deficits due to many factors except for large airports in Incheon, Gimpo, Jeju and Gimhae. These small and medium-sized local airports have currently been degraded to inefficient airports handling the significantly lower airline demand than their carrying capacities. In this context, this study conducted a survey on the actual conditions of the airline demand in small and medium-sized local airports for the last 10 years after the opening of the Korea Train eXpress and investigated the causes and actual conditions of an increase and a decrease in the airline demand. In addition, it analyzed the functionality, convenience and economic feasibility, competition elements in comparison with other means of transportation, and the actual competitive conditions of local airports. It investigated facility improvements through a field visit for local airports and analyzed the performance rate of passenger demands and the use rate of terminal facilities according to a change in the airline demand. This study aimed to provide basic data in the architectural planning field, needed to establish a plan for the airport revitalization of local airports with the results of an analysis on the actual conditions of small and medium-sized local airports.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.67-77
• /
• 2017

With the advent of the fourth industrial revolution, the digital transformation craze has intensified in diverse industries, such as finance, automotive, health care and agriculture. However, relative to industry demand, there is only few domestic research on digital transformation of small traders and no one has implemented empirical study on this field at all. Thus, the study conducted an empirical study to measure the digital transformation intention of domestic small traders. In the early days of domestic business start-ups, we searched for factors affecting the digital conversion intention of small business owners and designed an integrated framework to explain the causal relationship between factors. This study not only expanded and refined the scope of related research but also suggested the direction of another research that was not presented in previous research. However, there are limitations in many ways as much as the initial stage of a specific field of small business owners. There are limitations in explaining the overall perception of Korean small business owners. Therefore, in future studies, it is necessary to study more deeply by presenting more specific and various variables. In addition, although the number of respondents was sufficient in the process of empirical analysis, it is considered that the respondents are not enough to universalize the research result as a traditional small business person who did not convert all digital. It is necessary to carry out a comparative analysis by dividing the two groups in more detail and more specifically in the future study. The result of this study can suggest the direction for accelerating small traders' digital transformation intention in terms of practical view, and provide useful references which can support the theoretical foundation for researchers who will perform future related research in terms of academic view.

• Journal of Biomedical Engineering Research
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2009

Many types of small animal imaging modalities, like micro-CT, micro-PET, and micro-SPECT, have been recently developed worldwide. Small animal imaging systems are now recognized as indispensable tools to validate efficacy and safety of new drugs or new therapeutic methods using the animal disease models. With increasing demands for small animal imaging in biomedical research, multimodal small animal imaging systems, like micro-PET/CT or micro PET/MRI, are now also being developed. Small animal imaging with spatial resolution and sensitivity comparable to human imaging is quite challenging since laboratory small animals are much smaller than human beings. Research activities in Korea on small animal imaging systems are reviewed in this paper. In the field of micro-CT and micro-PET, many world-class technologies have been developed successfully in Korea. It is expected that the developed animal imaging system technologies can be used in the development of clinical imaging systems in Korea in the near future.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.225-230
• /
• 2001

Small diameter drilling which take high precision in cutting work is needed more small hole and high speed working. Especially, small hole deep drilling is one of the most important machining types and its necessity and importance become more and more increasing in the whole field of industry. This paper shows the limit depths with small diameter drills using experimental analysis. The results are gained by tool dynamometer and Labview system and obtained during small diameter twist drilling system on SM45C steel for different machining conditions. The machine and tools are the CNC machining center and twist drill of diameter 1.5mm. And additionally, tool microscope show the relationship between shapes of chips and breakage shapes of small diameter drills.