• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.44-54
• /
• 2001

In this paper, a novel test method is proposed to detect the hard and soft fault in analog circuits. The proposed test method makes use of the offset voltage, which is one of the op-amps characteristics. During the test mode, CUT is modified to unit gain op-amps with feedback loop. When the input of the op-amp is grounded, a good circuit has a small offset voltage, but a faulty circuit has a large offset voltage. Faults in the op-amp which cause the offset voltage exceeding predefined range of tolerance can be detected. In the proposed method, no test vector is required to be applied. Therefore the test vector generation problem is eliminated and the test time and cost is reduced. In this note, the validity of the proposed test method has been verified through the example of the dual slope A/D converter. The HSPICE simulations results affirm that the presented method assures a high fault coverage.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.195-202
• /
• 2005

An adaptive segmentation algorithm is used to efficiently target decisions in local non-stationary images. Until now, several adaptive approaches have been proposed as a method of segmentation. However, they can't be directly used for radar target detection because a radar signal has different characteristics from general images. Generally, a histogram of radar signal shows that targets have a relatively small number of frequency functions compared to the background and distribution of background, which have several shapes as the environment changes. In this paper, we propose an adaptive segmentation algorithm using a histogram chord which is a right-down line from maximum pick of frequency function. The proposed method provides thresholds which are optimum for several radar environments because the used chord for threshold search is not significantly effected by interference conditions. Simulation results show that the proposed method is superior to the traditional algorithms, global threshold method and distribution median method, with respect to detection performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.133-141
• /
• 2014

Social needs of smart work have been increasing throughout the worldwide and several developed countries have been developing enabled framework for smart work's coming proceed for a long time. The government is leading the smart work in Korea to devise a more efficient and competitiveness. Design of public collaboration solution has been proposed to provide the integration among a variety of smart environments and the interoperability between end-to-end. This paper takes a objective to develop a universal solution applicable to between traditional PC and mobile devices, such as a home station, and to built smart workplace linking workplace, outside space and the home. In particular, this paper offer entry-level advantages of public collaboration solution in conjunction with collaboration platform and phone platform owned by mobile communication platform company are mutually interfaced and aimed at small and medium-sized businesses and public.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.21-30
• /
• 1985

This paper deals whth the buckling as well as postbuckling analysis of axisymmertric shells taking the initial deflection effects into account. Incremental equilibrium equations, based on the principle of virtual work, were derived by the finite element method, the successive step-by-step Newton-Raphson iterative technique was adopted. To define the transition pattern of postbuckling behavior from the prebuckling state more accurately, a simple solution method was developed, i.e. the critical load was calculated by the load extrapolation method with the determinant of tangent stiffness matrix and the equilibrium configuration in the immediate postbuckling stage was obtained by perturbation scheme and eigenvalue analysis. Degenerated isoparametric shell elements were used to analyse the axisymmetric shell of revolution. And by the method developed in this paper, the computer program applicable to the nonlinear analysis of both thin and moderately thick shells was constructed. To verify the capabilities and accuracies of the present solution method, the computed results were compared with the results of analytical solutions. These results coincided fairly well in both the small deflection and large deflection ranges. Various numerical analyses were done to show the effect of initial deflection and shape of shells on buckling load and postbuckling behavior. Futhermore, corrected directions of applied loads at every increment steps were used to determine the actual effects of large deflection in non-conservative load systems such as hydrostatic pressure load. The following conclusions can be obtained. (1) The method described in this paper was found to be both economic and effective in calculating buckling load and postbuckling behavior of shell structure. (2) Buckling and postbuckling behavior of spherical caps is critically dependent upon their geometric configuration, i.e. the shape of spherical cap and quantities of the initial deflection. (3) In the analysis of large deflection problems of shells by the incremental method, corrections of the applied load directions are needed at every incremental step to compensate the follower force effects.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.205-209
• /
• 2015

The Eclipsing Binaries Minima (BIMA) Monitoring Project is a CCD-based photometric observational program initiated by Bosscha Observatory - Lembang, Indonesia in June 2012. Since December 2012 the National Astronomical Research Institute of Thailand (NARIT) has joined the BIMA Project as the main partner. This project aims to build an open-database of eclipsing binary minima and to establish the orbital period of each system and its variations. The project is conducted on the basis of multisite monitoring observations of eclipsing binaries with magnitudes less than 19 mag. Differential photometry methods have been applied throughout the observations. Data reduction was performed using IRAF. The observations were carried out in BVRI bands using three different small telescopes situated in Indonesia, Thailand, and Chile. Computer programs have been developed for calculating the time of minima. To date, more than 140 eclipsing binaries have been observed. From them 71 minima have been determined. We present and discuss the O-C diagrams for some eclipsing binary systems.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.176-190
• /
• 2011

Today's young generation in digital era has a rich education environment and convenient life, on the other hand, there was negative impact on growth as normal body type because of adverse impact on an excessive study and insufficient exercise, etc. Also, for these people in IT culture generation, using small mobile including computer for long time is becoming main issue as changing factor in posture and body type in terms of spine like their neck disc. This body-typed characteristic reaches to normal adult body type in the process of physical development of adult woman and has least modification in body type. Therefore, despite of early young generation, body suitability of upper body clothes might caused imbalance. So, for intended to early 20s women, to design clothes with consideration on imbalance of body type by bended and curved spine, body type studies about size of upper body and forms are needed. As this researcher measured the body type of early 20s college women in metropolitan area, changes in body type of young generation with use of digital equipment recently were recognized since straight body type was decreased unequally and had characteristic in terms of changes to be bended body type. The changes of these body type should be considered to make clothes. Also, since there are some restrictions on this research objects in terms of local and numbers of measured objects, a broad interpretation of result on this research should be really careful.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.141-145
• /
• 2017

This paper uses a glass dosimeter to evaluate the lens-absorbed dose of scattered radiation generated in tomotherapy intensity modulated radiation therapy (IMRT). The head and neck portion of the rando phantom was subjected to a CT scan. The tomotherapy plan was designed to ensure delivery of the prescribed total 70 Gy day 2.2 Gy. With the lens portion of the glass dosimeter, a 5mm bolus was subjected to the scattered radiation treatment, and the dose was measured in each of the three megavoltage CT (MVCT) modes. The result is multiplied by 30 times and was determined once as the mean value. The measurement at the MVCT Coarse mode is RT mode 10.797 mGy, that for the Normal mode is 13.360 mGy, for the Fine mode is a maximum of 22.872 mGy, and for the treatment mode is 895.830 mGy. A small amount of scattered radiation in the MVCT is measured in the lens scattered radiation, but scattered radiation during treatment was measured to be near 1 Gy on the lens. Compared to a one-time radiation treatment of 2.2 Gy, the survey showed something unexpected in that it was half the value of that research to the patient. Therefore, will be aware of how much of an influence there will be on sensitive organs, such as the lens by scattered radiation generated during intensity modulated radiation therapy.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.207-214
• /
• 2001

Silica glass is a core material for optical fiber in optical telecommunications, but its centrosymmetry eliminates the second order nonlinearity. But it is experimentally well known that the space charge polarization induces the Second Harmonic Generation (SHG) when a strong DC voltage is applied to silica glass for a long period of time with metal blocking electrodes. In this report, the results of a theoretical calculation of the nonlinear optical property caused by the space charge polarization, and a model of a numerical analysis to predict the small chance in nonlinear optical property as functions of time and space are provided. Assuming that amorphous silica is a solid state electrolyte and sodium ion is the only mobile charge carrier, 'Finite Difference Method' was employed for modeling of numerical analysis. The distributions of the concentration of sodium ion and electric field as functions of a normalized length of the specimen and a normalized applied voltage were simulated.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.695-702
• /
• 2020

Recently, as research on smart farms has been actively conducted, indoor environment control, such as a green house, has reached a high level. However, In the field of forestry where cultivation is carried out in outdoor, the use of ICT is still insufficient. In this paper, we propose LPWA-based forest growth environment collection and big data analysis system using ICT technology. The proposed system collects and transmits the field cultivation environment data to the server using small solar power generation and LPWA technology based on the oneM2M architecture. The transmitted data is constructed as big data on the server and utilizes it to predict the production and quality of forest products. The proposed system is expected to contribute to the production of low-cost, high-quality crops through the fusion of renewable energy and smart farms. In addition, it can be applied to other industrial fields that utilize the oneM2M architecture and monitoring the growth environment of agricultural crops in the field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.363-367
• /
• 1999

As the subscription rate to both Internet services and wireless communications services increases rapidly, traffic in the future wireless communications will be dominated by Internet applications. Current research for wireless technology is focused to the multimedia data transmission mainly for the personal computer or notebook whose display which has large display and abundant memory. But in the near future, Internet access request from the handphone or PDA device which is already spreaded in the world will be large. Special handset terminals which has small display monitor, low capacity memory and poor processing power has to be managed differently from torrent wireless communications protocols. So, WAP Forum is organized with wireless handset manufacturers in the world and the standardization process for wireless application is being actively developed. In this paper, basic model and architecture of WAP is introduced and adaptation requirements for change from HTML documents to WML formats are proposed. Also, compression ratio gained in the transform from the existing web documents to WML is shown.