• 한국농공학회논문집
• /
• 제64권4호
• /
• pp.1-10
• /
• 2022

A vegetative filter strip (VFS) is one of the best management practices (BMPs) to reduce pollutant loads. This study aims to assess the effectiveness of VFS in dense upland field areas. The study areas are agricultural fields in the Maedae (MD), Gaa (GA), and Jaun (JU) watersheds, where severe sediment yields have occurred and the Korean government has designated them as non-point management regions. The agricultural fields were divided into three or four clusters for each watershed based on their slope, slope length, and area (e.g., MD1, MD2). To assess the sediment trapping (STE) and pesticide reduction efficiency (PRE) of VFS, the Vegetative Filter Strip Modeling System (VFSMOD) was applied with three different scenarios (SC) (SC1: VFS with rye vegetation; SC2: VFS with rye vegetation and a gentle slope in VFS range; and SC3: VFS with grass mixture). For SC1, there were relatively short slope lengths and small areas in the MD1 and GA3 clusters, and they showed higher pollutant reduction (STE>50%, PRE>25%). For SC2 and SC3, all clusters in GA and some clusters (MD1 and MD3) in MD show higher pollutant reduction (>25%), while the uplands in JU still show a lower pollutant (<25%). With correlation analysis between geographic characteristics and VFS effectiveness slope and slope length showed relative higher correlations with the pollutant efficiency than a area. The results of this study implied that slope and slope length should be considered to find suitable upland conditions for VFS installations.

• 한국측량학회지
• /
• 제34권3호
• /
• pp.283-290
• /
• 2016

정사영상 제작에 주로 사용되는 기존의 항공사진측량 방법은 대규모 지역에 대해서는 효과적이나 소규모 지역에서는 비경제적이며, 지형지물의 지속적인 변화관측과 짧은 주기의 제작에는 어려움이 있다. 최근 다양한 센서들이 탑재된 무인항공기(UAV: Unmanned Aerial Vehicle)가 급격한 속도로 발전되고 있으며 이러한 무인항공기는 공간정보 분야에서도 다양하게 사용되고 있다. 무인항공기는 소규모지역에 대해서 신속하게 영상 자료 취득이 가능하며 적은 비용으로 영상자료들을 수시로 갱신할 수 있다. 또한, 불필요한 지역을 제외한 특정지역에 대해서만 공간정보 자료 취득이 가능함으로써 공간정보자료의 중복성을 최소화 할 수 있는 장점을 가지고 있다. 본 연구에서는 평지지역에 비해 상대적으로 정확도가 낮은 소규모 경사지역을 대상으로 일반용 저사양 무인항공기를 이용하여 정사영상과 수치표고모델 (DEM: Digital Elevation Model)을 생성하였으며, 검사점에 의한 평면 및 수직 좌표 성분의 RMSE는 σ_H = ±0.12 m, σ_V = ±0.09 m 의 정확도를 보였다. 그 결과 1/500 축척의 국토지리정보원 수치지도 기준 표준편차와 최대오차의 허용범위를 만족하였다. 이를 통하여 고가의 측량용 무인항공기가 아닌 일반용 저사양 무인항공기를 이용하여 소규모 경사지역의 정사영상 제작 가능성을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.891-894
• /
• 2010

Steep slope disasters accompany economic loss along with casualties, so the evaluation and the systematic management on the regions with slope collapse danger are required. A lot of manpower, time, and economic cost are needed to accumulate disaster history of steep slope areas by the national and small-sized region. As the method for this, it construed location data about each area with disaster occurrence by maknd elocation data of collapsed steep areas through high-resolution satellite image and collectnd edata on the regions with disasters through media and literature data such as a disaster annual report and a disaster comprehensive report. The study selected three shortest routes includnd ethe area with disaster in Jeolla province on literature and the collapsed area found by the image data, and constructed the results of the field survey as database.

• 상하수도학회지
• /
• 제23권2호
• /
• pp.181-187
• /
• 2009

In this study, a runoff hydrograph and runoff volume were calculated by using the kinetic wave theory for small urban watersheds based on the concept of low impact development(LID), and the effective imperviousness was estimated based on these calculations. The degree of sensitivity of the effective imperviousness of small watersheds to the impervious to pervious area ratio, infiltration capability, watershed slope, roughness coefficient and surface storage depth was then analyzed. From this analysis, the following conclusions were obtained: The effective imperviousness and paved area reduction factor decreased as the infiltration capability of pervious area increased. As the slope of watersheds becomes sharper, the effective imperviousness and the paved area reduction factor display an increasing trend. As the roughness coefficient of impervious areas increases, the effective imperviousness and the paved area reduction factor tend to increase. As the storage depth increases, the effective imperviousness and the paved area reduction factor show an upward trend, but the increase is minimal. Under the conditions of this study, it was found that the effective imperviousness is most sensitive to watershed slope, followed by infiltration capability and roughness coefficient, which affect the sensitivity of the effective imperviousness at a similar level, and the storage depth was found to have little influence on the effective imperviousness.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.548-552
• /
• 2003

During the last few decades, the frequency and distribution of rockfalls have been increased in Korea due the development of rock slope in mountain areas. Although the scale of, falling block of rockfall was small, there were some casualties of lives and loss of properties. In order to reduce damage from rockfall, analysis on rock slope indanger of rockfall should be carried out. Thus, the simulation softwares for rockfall behavior analysis have been introduced. In this study, geotechnical investigation and input data for rockfall simulation are described with the comparison among four commercially available rockfall simulation softwares. Finally, rockfall simulation works are described by exmining a case of inaccessible rock-slope of potential rockfall in Korea.

• 한국전기전자재료학회논문지
• /
• 제33권5호
• /
• pp.380-385
• /
• 2020

Over the past decade, small robots have been of particular interest in the engineering field. Among the various types of small robots, biomimetic robots, which mimic animals and insects, have been developed for special activities in areas where humans cannot physically access. The optimal motion of a walking robot can be determined by the characteristics of the traversed surface (e.g., roughness, curvature, slope, materials, etc.). This study proposes three types of piezoelectric structures using different driving mechanisms, depending on the application range of the small walking robots. Dynamic modeling using computer-aided engineering optimized the shape of the robot to maximize its moving characteristics, and the results were also verified through its fabrication and experimentation. Three types of robots, named by their actuator shapes as I, π, & T-shape, were proposed regarding application for small scale ambulatory robots to different terrain conditions. Among these, the T-shaped robots were shown to have a wide range of speeds (from 2 mm/s up to 255 mm/s) and good carrying capacity (up to 10 g at 50 mm/s) through driving experiments. Based on this study, we proposed possible application areas for the three types of walking robot actuators.

• 물과 미래
• /
• 제28권3호
• /
• pp.197-204
• /
• 1995

인구의 도시집중으로 인하여 유역의 유출용적이 증대하며 이로 인한 합류부의 수위상승으로 내수배제가 불가능하게 되어 침수피해가 발생하고 있다. 본 실험연구에서는 소유역 하천에서 우수거의 합류로 인한 본류하천의 흐름변화를 실험하였으며, 하천의 수위상승을 소하천(본류)의 유량과 경사, 우수거(지류)의 유량과 경사 및 합류각에 따른 본류의 수위상승을 분석하였다. 실험결과 본류하천의 경사에 대해서는 경사가 급할수록 수심비가 증대하는 것으로 나타났으며, 본류의 유량은 적을수록, 지류의 유량은 많을 수록 수심비는 크게 나타났다. 합류각에 대해서는 합류각이 작을수록 수심비가 작은값을 나타내고 있다. 이와 같이 도시 소하천의 합류시 수심비의 상승영향을 보면 합류각, 지류유량 및 본류유량 등의 순으로 상승영향이 밀접하게 나타났다.

• 한국수자원학회논문집
• /
• 제36권1호
• /
• pp.87-104
• /
• 2003

지표면 유출과 하천 유출 통으로 구성된 동일한 홍수유출모형 SIRG-RS를 소유역과 대유역에 적용하였다. 지표면 유출로부터의 유입 방법, 하천 접합부에서의 계산방법, 급경사 산지하천에서의 에너지손실 계산 등에서 개선책을 강구하였다. 마찰력 산정을 위하여 레이놀즈수와 조고비의 함수인 지수형 마찰계수 산정식을 도입하였다. 또한 지수형 마찰계수 산정식은 실험자료뿐 아니라 최근 입수한 현장 관측자료를 사용하여 개선하였다. 개선된 모형은 대규모의 유역과 아주 작은 크기의 소유역에도 적용하였는데, 두 가지 경우 모두 관측자료와 비교하여 양호한 계산 결과를 얻었다.

• 지질공학
• /
• 제17권1호
• /
• pp.75-87
• /
• 2007

자연사면에서의 산사태를 평가함에 있어 발생양상과 기하특성을 파악하는 것은 매우 중요하다. 이 연구는 지질을 달리하는 3개지역(장흥, 편마암류; 상주, 화강암류; 포항, 제3기 퇴적암류)에서 발생한 산사태를 대상으로 지질조건에 따른 산사태의 기하양상을 분석하였다. 3개지역에서는 1998년 여름에 $150{\sim}588mm$의 집중호우로 인해 총 1,582개의 산사태가 발생하였다. 이들 산사태를 조사하여 지질조건별 기하특성을 분석하였다. 산사태는 90% 이상의 사면고도에서 발생빈도가 가장 높고 70% 미만의 고도에서는 매우 낮다. 사면경사는 $26{\sim}30^{\circ}$ 범위에서 가장 많이 발생하였고 $20^{\circ}$ 미만에서는 발생빈도가 매우 낮으며 이러한 양상은 지질별로 거의 유사한 경향성을 보였다. 규모는 부피로 보아 수십부터 수백을 넘는 경우도 있으며, 그 길이는 $5{\sim}300m$, 폭은 $3{\sim}50m$로서 좁고 긴 형태이고 깊이는 대부분 1 m 이내로서 매우 얕은 특징을 보였다. 그리고 유형은 기반암의 표면을 파괴면으로 하여 그 상부에 위치한 토층이 미끄러지는 전이형 슬라이드가 주를 이루며, 토석류로 이뤄진 사태물질이 하부사면과 계곡부로 이동되면서 유동성산사태로 변화되는 양상을 보였다.

• 한국환경복원기술학회지
• /
• 제2권3호
• /
• pp.83-92
• /
• 1999

To investigate the influence of forest road characteristics and site conditions on the stability of forest-road in granite area, four forest roads had been selected in Kyongbuk regions. The total of 13 road characteristic variables were evaluated by the discriminant analysis. The factors influencing the stability of forest road were bed rock, slope length, coverage, hardness, side-ditch erosion and road width. But aspect and soil texture were not significant for the stability in this area. In the correlation between forest environment and road structure, hardness and bed rock was highly significant in stability group, and coverage and side-ditch erosion was highly significant in instability group. 75 of 175 segments were instable whereas the others were stable. The centroids value by discriminant function in the stability and instability were estimated to 3.0585 and -1.9116, respectively. The stability criterion of forest road was discriminated from the centroids value of the each group. The main factors contributing the stability of forest road were significant in order of side-ditch erosion, coverage, soil texture, elevation, gradient, slope length and construction year. The prediction rate of discriminant function for stability evaluation of forest road was as high as 97.44%. In conclusion, the forest road structure factors such as length, coverage and slope gradient were controlled by construction techniques. If the factors like those should be considered in design, construction and forest road management, the stability of forest road may increase more. And also, it is necessary to take slope protection measures like small terraces and retaining walls for stability of cut slope.