• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.39-51
• /
• 2014

This paper deals with design of a direct-coupled, small-scaled permanent magnet generator (PMG) for wind power application. First, this paper determines rated power and speed of the PMG from measured characteristics of wind turbines. Second, we derive analytical solutions for the open-circuit field in order to determine optimum magnet thickness and pole pitch/arc ratio. Third, on the basis of open circuit field solutions, stator magnetic circuit including slot opening, teeth width and yoke thickness is designed. And then, a diameter of stator coil which agree with a required current density is calculated, and its turns are determined from the area of slot considering winding packing factor. Finally, finite element (FE) method is employed in analyzing the details of the designed PMG and, test results such as back-emf measurements are given to confirm the design.

• Computers and Concrete
• /
• v.3 no.5
• /
• pp.301-312
• /
• 2006

Experimental research revealed that the spatial dispersion of aggregate grains exerts pronounced influences on the mechanical and durability properties of concrete. Therefore, insight into this phenomenon is of paramount importance. Experimental approaches do not provide direct access to three-dimensional spacing information in concrete, however. Contrarily, simulation approaches are mostly deficient in generating packing systems of aggregate grains with sufficient density. This paper therefore employs a dynamic simulation system (with the acronym SPACE), allowing the generation of dense random packing of grains, representative for concrete aggregates. This paper studies by means of SPACE packing structures of aggregates with a Fuller type of size distribution, generally accepted as a suitable approximation for actual aggregate systems. Mean free spacing $\bar{\lambda}$, mean nearest neighbour distance (NND) between grain centres $\bar{\Delta}_3$, and the probability density function of ${\Delta}_3$ are used to characterize the spatial dispersion of aggregate grains in model concretes. Influences on these spacing parameters are studied of volume fraction and the size range of aggregate grains. The values of these descriptors are estimated by means of stereological tools, whereupon the calculation results are compared with measurements. The simulation results indicate that the size range of aggregate grains has a more pronounced influence on the spacing parameters than exerted by the volume fraction of aggregate. At relatively high volume density of aggregates, as met in the present cases, theoretical and experimental values are found quite similar. The mean free spacing is known to be independent of the actual dispersion characteristics (Underwood 1968); it is a structural parameter governed by material composition. Moreover, scatter of the mean free spacing among the serial sections of the model concrete in the simulation study is relatively small, demonstrating the sample size to be representative for composition homogeneity of aggregate grains. The distribution of ${\Delta}_3$ observed in this study is markedly skew, indicating a concentration of relatively small values of ${\Delta}_3$. The estimate of the size of the representative volume element (RVE) for configuration homogeneity based on NND exceeds by one order of magnitude the estimate for structure-insensitive properties. This is in accordance with predictions of Brown (1965) for composition and configuration homogeneity (corresponding to structure-insensitive and structure-sensitive properties) of conglomerates.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.1 s.37
• /
• pp.26-33
• /
• 1992

The carpal tunnel syndrome is one of the most common peripheral nerve entrapment syndromes. The typical symptoms are pain, numbness and paresthesia in the median nerve territory of the hand. Recently, it is widely recognized that occupational factor is regarded as the important cause of the carpal tunnel syndrome. Clinical study is performed in the 42 female workers who is repetitively working at packing department in a rayon manufacturing factory from November 1991 till March 1992. The study included a questionnaire, physical examinations, and the neurophysiological test. The summary of the results obtained was as follows : 1. Among 42 packing workers, 9 workers(21.4%) were diagnosed as carpal tunnel syndrome by electromyography. The affected side was bilateral in 4 workers(9.5%), right in 4 workers(9.5%), and left in one worker(2.4%). 2. Among 42 subjects, 28 workers(66.7%) complained the clinical symptoms related to carpal tunnel syndrome, 11 workers(26.2%) showed positive Phalen sign, and 7 workers(16.7%) showed positive Tinel sign. 3. Researchers regard electromyographic finding as the gold standard for diagnosis of carpal tunnel syndrome. The sensitivity and specificity of the clinical symptoms to diagnose the carpal tunnel syndrome were 0.89, 0.39 respectively. If the carpal tunnel syndrome is diagnosed by the combination of the positive findings of the symptoms and the physical examinations, either Tinel or Phalen sign, the sensitivity and specificity were 0.67 and 0.76 respectively. Considering above results, though this small number of workers is not adequate for epidemiologic conclusions, carpal tunnel syndrome seems to be an important occupational disorder among packing workers in a rayon manufacturing factory.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.4
• /
• pp.241-244
• /
• 2013

The authors describe the use of a self-expandable stent in a temporary deployment for treatment of a very wide-neck A1 segment of anterior cerebral artery (ACA) aneurysm following incomplete clipping. A 39-year-old hypertensive man presenting with seizure-like movement underwent computed tomography, which showed acute subarachnoid hemorrhage and an A1 segment of ACA aneurysm with superior and inferior projection. He underwent surgical clipping of the aneurysm, but superior and posterior portion of wide-neck aneurysm remained. We decided to treat the remnant aneurysm using an endovascular modality. After selection of the aneurysm, coil packing was performed assisted by the temporary semi-jailing technique. The Enterprise stent (Cordis Neurovascular, Miami, FL, USA) was deployed and recaptured repeatedly for angiography to ensure safety of the small caliber parent artery. Successful semi-deployment and recapture of the stent allowed subtotal coil occlusion of the aneurysm with good anatomic and clinical results. No complications were encountered. The stent could be recaptured up to the point where the proximal end of the stent marker was aligned with distal marker band of the microcatheter, approximately 70% of the stent length. The temporary semi-jailing technique is feasible for wide-neck aneurysm with small caliber parent artery.

• Horticultural Science & Technology
• /
• v.31 no.5
• /
• pp.558-564
• /
• 2013

The objective of this research was to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. Three root media were formulated by blending peatmoss (PM) with expanded rice hull (PM + ERH, 8:2, v/v), carbonized rice hull (PM + CRH, 6:4) and ground and aged pine bark (PM + GAPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120, and 130%, then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) were measured. The TP decreased significantly as the packing amount of three root media were elevated in all sizes of container. The TP did not show significant differences among the root media in small sizes of containers, but showed significant differences when sizes of containers became larger. As packing amount of three root media were elevated, the CCs in all sizes of containers were decreased. The PM + CRH had the lowest CC among three root media in containers smaller than 8.5 cm, but had the highest CC in those larger than 10.5 cm. These results indicated that the decreases in CC were influenced by the sizes of containers as well as kinds of root media. The elevation of packing amount in three root media diminished significantly the AFP. The AFP in PM + GAPB medium was two times as high as those of PM + ERH or PM + CRH when equal packing densities were applied in all sizes of containers. As the container sizes became larger in three root media, the extents in decreasing of CC were distinct than those of AFP. Above results indicate that elevation in packing amount of three root media decreased significantly the TP, CC and AFP, but these were influenced differently by sizes of containers and kinds of root media. The results would be useful for expectation in the changes of physical properties in various sizes of containers filled with peatmoss based root media.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.2 s.191
• /
• pp.95-102
• /
• 2007

A feeding system is a key component in manufacturing packing boxes such as printing, slotting and gluing. The role of the feeding system is to feed corrugate cardboards which is usually tick and large. So, a special method is necessary to feed corrugate cardboards. This paper suggests a concept and an automatic feeding machine to feed corrugated cardboards using TRIZ, the theory of inventive problem solving. The automatic feeding machine consists of units to regulate the machine according to length and width of corrugated cardboards, a feeding part with a plurality of small rollers, and a sucking part which intensify frictional force between rollers and the lowest feeding cardboard. In particular, the feeding part is composed of an up-and-down motion plate with holes to suck the lowest corrugated cardboard as well as small rolling rollers after stopping in a moment. Thus this machine does not sensitive to size of corrugated cardboards and also can keep feeding accuracy during feeding fast.

• Journal of Distribution Science
• /
• v.10 no.9
• /
• pp.13-21
• /
• 2012

Purpose - Korean traditional markets are falling behind the times, because they have not met the demands of social changes including: an overall improvement in standards of living, shift in purchasing form and propagation of cars. It is one of the most indigenous and conventional foods of Korea, taking a seat far in the corner of Korean traditional culture. Research design / data / methodology - Korean traditional rice cakes however have their limits. They are produced and sold by independent shop owners who cannot compete with the brand power of franchise organizations. The leadership of adminstration is needed for these shop owners particularly in visual merchandising related to interior design and display. Results - Additionally, the advent of major company-run rice cake cafe adds fresh fuel to the problem in addition to small but luxurious packaging. Small business owners need packaging technology for overall quality improvement of sales of rice cakes. Additional help is needed with the mode of packing to promote sales and win consumer confidence. Conclusions - Further assistance with marketing for seasonal displays is needed as well as teaching business owners how to read graphic data. Regular specialized education for visual merchandising of rice cakes could help independent market owners win the competition against franchise-based organizations.

• Journal of Photoscience
• /
• v.5 no.1
• /
• pp.11-15
• /
• 1998

The texture change of non-linear optical molecules at the air/water interface was investigated as a function of surface pressure with Brewster angle microscopy. The texture change resulted from the aggregation of dye molecules is important to understand the film uniformity and grain formation process. The 4-Octadecylhydroxy-4'-nitrostilbene (OHNS) generated the small spots of size around 1$\mu$m. The spots exhibit high contrast with other film area and do not show angle dependent reflectivity change. It is interesting to observe that the size of the domain stays the same as the film pressure increases. At high surface pressure, the contrast ratio of domains becomes high, which means dense packing of OHNS. And, the size of domain grows. In the middle of domain, highly contrasted domains are formed. The first and the second order transitions of OHNS observed from surface pressure-area isotherm result from the two types of grains. The N,N-Dihexadecylcyanoaniline (DHCA) formed highly contrasted gains over entire region, and the grains are the double layers. The difference in Langmuir film of OHNS and DHCA at the air/water interface is consistent with the small tilt angle from the surface normal for OHNS and the large tilt angle for DHCA in the Langmuir-Blodgett films.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1027-1033
• /
• 2016

There is an increasing need for manufacturing systems to produce batches in small quantities. Such manufacturing systems are significantly difficult to develop with conventional automation equipment. Recently, several research groups have applied industrial dual-arm robots to cell production lines. A synchronization method for robots is necessary for the cell production process when robots work in a shared workspace. Conventional automation factories do not need this method because the main control system operates all of the machines or robots. However, our intended application for the developed robot is in small manufacturing environments that cannot install an expensive main control system. We propose an inexpensive and high-performance method with a simple digital in/out channel using a real-time communication protocol. The developed method was validated in a pilot production line for cellular phone packing.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.363-368
• /
• 2012

Nitriding and post-sintering behavior of powder mixture compacts were investigated. As mixture compacts are different from simple Si compacts, the fabrication of a sintered body with a mixture composition has engineering implications. In this research, in specimens without a pore former, the extent of nitridation increased with $Si_3N_4$ content, while the highest extent of nitridation was measured in $Si_3N_4$-free composition when a pore former was added. Large pores made from the thermal decomposition of the pore former collapsed, and they were filled with a reaction product, reaction-bonded silicon nitride (RBSN) in the $Si_3N_4$-free specimen. On the other hand, pores from the decomposed pore former were retained in the $Si_3N_4$-added specimen. Introduction of small $Si_3N_4$ particles ($d_{50}=0.3{\mu}m$) into a powder compact consisting of large silicon particles ($d_{50}=7{\mu}m$) promoted close packing in the green body compact, and resulted in a stable strut structure after decomposition of the pore former. The local packing density of the strut structure depends on silicon to $Si_3N_4$ size ratio and affected both nitriding reaction kinetics and microstructure in the post-sintered body.