• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1365-1374
• /
• 2010

최근 들어 더 복잡해진 연근해 해상교통은 특히, 연근해 어선들에 더 큰 부담이 되고 있다. 연근해 어선들에게 항해 및 보안정보를 제공하고 해상환경 보호를 위해 항해 관련 서비스 및 정보를 제공할 수 있는 디지털 어업정보통신망 구성에 대한 수요가 증가하고 있다. 그러나 기존 Inmarsat 위성통신망을 이용하는 경우 통화료 부담이 크고, 고가의 장비로 영세한 어업인에게는 현실적인 해결책이 되지 못한다. 본 연구에서는 기존 연근해(A1, A2 해역) 어선들에 설치된 MF/HF SSB 통신기기에 I-PHONE, PDA, 넷 북, 노트북, 기존 PC 등에 통신모듈을 연결하여 PSK31 통신을 하는 무선 디지털 어업정보통신망 및 MF/HF대 주파수를 활용한 선박자동식별장치(AIS)를 구현하려는 방안을 제안하였다.

• Journal of Ecology and Environment
• /
• 제38권3호
• /
• pp.383-388
• /
• 2015

Reservoirs consist of two different environments, the littoral and the pelagic zone, and different fishing gear is commonly used in each zone-gill nets in the pelagic zone and electrofishing in the littoral zone. However, an active fishing gear, the cast net, is normally used instead of electrofishing for scientific studies in South Korea. In order to estimate cast net effectiveness for determining fish status in reservoirs, the study was conducted at 15 reservoirs with two different fishing gears: a cast net in the littoral zone and gill nets in the pelagic zone. When combining catches of both gears, species richness increased substantially compared to using one gear only. There was a size difference in fish caught by each net, and small fish were predominantly caught with the cast net due to its small mesh size (7 mm). The combined length of six species, used for length-weight relationship analysis, collected with the cast net was smaller than that collected with gill nets (independent t-test, P < 0.05). In this study, cast net sampling provided sufficient data for the littoral zone, but not enough to identify the overall fish assemblage in studied reservoirs. Utilization of only one gear can therefore lead to substantial underestimation of fish status, and a combination of both gears is recommended for determining more reliable estimates of fish status in reservoirs.

• Journal of Ship and Ocean Technology
• /
• 제5권1호
• /
• pp.1-13
• /
• 2001

As Indonesia determines to increase its marine fishery production, the development of tradi-tional boatyards has to be included in the agenda as it will give the local fishing communities a better chance to compete with large capital intensive fishing companies. It will also spread job opportunities evenly throughout the country instead of concentration fishing vessel con- struction in a few large shipyards located primarily on the highly populated island of Java. However development every single boatyard in indonesia would not only be prohibitively ex-pensive, but it would also create social tensions as the introduced technology would not be immediately accepted by the rural societies whose own traditions are still culturally signif-icant. Both these problems can be reduced by developing a collaborative scheme between traditional boatyards and a larger shipyard. The shipyard, with modern facilities, can develop work packages containing knock down components which are then assembled in the tradi-tional boatyards. The work packages are planned and designed so that every component can be assembled with relatively simple tools. Radical changes can be avoided as new techniques can be introduced gradually, responding to the boatyard\\`s own requirements and aspirations. While this manufacturing procedure is conceptually straightforward its efficient implemen-tation is in practice complicated by the fact that each traditional boatyard has unique char-acteristics in terms of labour resources, technological capability, and transportation links. By developing a computer model to simulate the interaction between the main shipyard and small traditional a computer model to simulate the interaction between the main shipyard and small traditional boatyards work packages can be designed that ensure that activities at all manufacturing locations are efficient.

• 수산해양기술연구
• /
• 제54권4호
• /
• pp.315-323
• /
• 2018

Fossil fuel combustion during fishing activities is a major contributor to climate changes in the fishing industry. The Tier1 methodology calculation and on-site continuous measurements of the greenhouse gas were carried out through the use of fuel by the coastal and offshore gillnet (blue crabs and yellow croaker) and trap (small octopus and red snow crab) fishing boats in Korea. The emission comparison results showed that the field measurements are similar to or slightly higher than the Tier1 estimates for coastal gillnet and trap. In offshore gillnet and trap fisheries, Tier1 estimate of greenhouse gases was about $1,644-13,875kg\;CO_2/L$, which was more than the field measurement value. The $CO_2$ emissions factor based on the fuel usage was $2.49-3.2kg\;CO_2/L$ for coastal fisheries and $1.46-2.24kg\;CO_2/L$ for offshore fisheries. Furthermore, GHG emissions per unit catch and the ratio of field measurement and Tier1 emission estimate were investigated. Since the total catch of coastal fish was relatively small, the emission per unit catch in coastal fisheries was four to eight times larger. The results of this study could be used to determine the baseline data for responding to changes in fisheries environment and reducing greenhouse gas emission.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.390-396
• /
• 2011

Southern rough shrimp Trachysalambria curvirostris is exploited mainly by small shrimp beam trawl in coastal regions of Korea. To determine the size selectivity of a shrimp beam trawl for this species, a series of comparative fishing experiments was conducted in the sea adjacent to Geoje Island off the southern cost of Korea in June and November, 2010, using codends with four different mesh sizes(14.2, 17.8, 25.5, and 35.3 mm). The extended Share Each Length's Catch Total(SELECT) analysis method, based on a multinomial distribution, was applied to the fishing data to obtain a master selection curve. The model with the estimated split parameters fit the catch data best. The master selection curve was estimated to be: s(R)=exp(15.183R-7.872)/[1+exp(15.183R-7.872)], where the relative carapace length, R, is the ratio of carapace length to mesh size. The relative carapace length for 50% retention was 0.518, and the selection range was 0.145. The results suggest that codends with a larger mesh size allow more small-sized shrimps to escape.

• 한국항해항만학회지
• /
• 제34권9호
• /
• pp.711-718
• /
• 2010

Redevelopment of the domestic small fishing ports is being started in earnest by applying the environmentally friendly technology in order to attract tourists. For the purpose of improving water quality in the harbor, selection of breakwater type might have the priority to secure calmness and stability. Therefore, this study is to determine the hydraulic characteristics of reflective ratio, installation efficiency and stability of the special type of blocks through the hydraulic model experiment. The results were introduced to analyze for the effect of infield construction work through numerical analysis. Gujora, a small fishing port in southern Korea, is affected by the waves of SSE, S, SSW direction and strong tidal currents. The results of applying cylindrical slit block show that stability of the blocks and harbor calmness were secured. Considering that the pass rate of a long period wave is still excellent, the primary objective of wave control and the secondary objective of improving water exchange are satisfied simultaneously.

• 수산해양교육연구
• /
• 제11권2호
• /
• pp.184-202
• /
• 1999

The roll damping characteristics of the three models of a small fishing(3 ton class fishing vessel), such as the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll and head waves tests in calm water in a towing tank with the various forward speeds, initial angles and OG's. The experimental results are compared with the numerical results of mathematical modelings by the energy method for these three models and the energy dissipation patterns are also compared. And the wave length variations are also included. The experimental results are compared with the numerical results of mathematical modelings by the energy method for these three models and the energy dissipation patterns are also compared. The roll damping moment of the models is increased for zero speed cases, but as the speed increases, the effect of the waves on the roll damping of the models with the additional devices is negligible due to the much increased damping caused by the lift increase.

• 해양환경안전학회지
• /
• 제21권3호
• /
• pp.259-265
• /
• 2015

It is clearly understood that e-navigation is beneficial to prevent collision and grounding of ships. The purpose of this study is to define and present a future ship operation system under the e-navigation environment in order to provide clear direction for the design of Korean e-navigation system. The future ship operation system consists of shipboard navigational system, shore supporting system and maritime communication system. To achieve the objectives of this study, the ship operation system was discussed separately into SOLAS ships and non-SOLAS ships in this study. In SOLAS ships, mariners become a system manager, choosing system presets, interpreting system output, and monitoring vessel response. In small ships and fishing vessels, mariners may enjoy their navigation by using the automatic tracking of ship's position on the portable electronic chart display. The improved bridge design, integrated and harmonized navigational system and single window reporting will reduce significantly the administrative and physical workload of mariners. Mariners can concentrate their attention more on navigational duty under the e-navigation environment. To build an effective Korean e-navigation system, the essential navigational functions and e-navigation services for small ships and fishing vessels must be identified and developed taking into account user needs.

• 한국항해학회지
• /
• 제3권1호
• /
• pp.47-77
• /
• 1979

A microwave Navigational Aid system is suggested suitable for fishing boats too small to be equipped with Radar or Radio-Direction-Finder. The system proposed here is similar to that of Talking-Beacon developed in Japan, but the distinctive modification proposed is that an increase of sixteen times in peak transmitting power, thus an accompanying increase of coverage, is achieved with the same mean transmitting power as that of Japan without sacrificing the clearness of azimuth information, by adopting a pulse repetition modulation instead of pulse width modulation as in Japan system. An experimental land station transmitter of transmitting frequency of 9, 370MHz and of peak power of 35kw with a microwave beam of 1 degree in horizontal width and 7 degrees in vertical width rotating once every three minutes, and also an experimental receiver of 20-dB in sensitivity and of an assumed cost of 100 dollars, operated by a 12 volts battery source are made, and the sail test results are reported showing that a bearing infromation of an accuracy of within two degrees can be obtainable every three minutes at a distance of as far as 24 miles from the transmitter if the transmitter is located as high as 100 meters above sea-level.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.373-374
• /
• 2022

연근해 어선 등 소형선박에 설치되는 항해통신어로기자재는 대외의존도가 높아 외산제품에 의존하고 있다. 국산화 관점에서 해외 제품수준의 국산화 기술개발이 진행되고 있으며, Track Record 확보 차원에서 전용 테스트베드를 제작하여 실증하고자 한다. 본 논문에서는 테스트베드 설계를 위한 기초연구를 통하여 테스트베드 형태 및 설계방안을 도출하고자 하였다.