• 한국건축시공학회지
• /
• 제9권6호
• /
• pp.121-129
• /
• 2009

중소규모 건축물의 시공 현장은 기초의 크기가 작고 터파기 깊이가 얕은 경우가 많다. 이런 경우 일반 거푸집을 이용하여 2회에 걸쳐 타설하는 기존의 재래식 공법보다 매립형 보조거푸집을 이용하여 기초 및 지중보와 바닥슬래브를 동시에 타설하는 공법을 사용하면 지하층 골조공기의 단축과 그에 따른 원가절감을 기대 할 수 있다. 기존의 매립형 보조거푸집은 거푸집의 종류에 따라서 자재와 인건비에 따른 원가, 품질상의 문제들이 있기 때문에 사용에 제약이 있다. 따라서 본 연구에서는 개선방안으로써 발포폴리스티렌을 매립형 보조거푸집으로 이용한 기초 및 지중보와 바닥슬래브 콘크리트 동시 타설공법을 제안하고, 기존의 공법들과 비교하며, 공법별 평가를 통하여 효용성을 검증하고자 한다.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.213-223
• /
• 2016

도시에 밀집된 인구에 의하여 교통 혼잡이 빈번하게 일어나고 있으며 그에 따른 도시민의 불편이 증대 되었다. 이러한 교통 불편을 최소화 하는 방안으로 저심도 철도와 같은 다양한 교통시스템이 제안되고 있다. 본 논문에서는 경제적인 저심도 철도시스템 구축을 위하여 개발중인 트렌치쉴드의 설계와 더불어 소형 트렌치 쉴드 장비를 제작하여 트렌치 쉴드의 적용성에 대한 검토가 이루어졌다. 본 논문에서 도출한 트렌치 쉴드는 굴착부와 쉴드부, 추진부로 구성되어있다. 이렇게 검토 및 설계된 트렌치쉴드의 적용성을 검토하기 위하여 실내실험을 추진하였으며 이를 통하여 트렌치 쉴드를 통한 개착시공현장의 급속시공이 가능함을 확인하였다. 비록 실내실험이고 상대적으로 소규모의 실험이지만 트렌치 쉴드를 이용할 경우 3m/일의 시공속도 확보가 가능할 것으로 판단된다.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.625-632
• /
• 2023

최근 안전에 대한 사회적 관심의 증가로 인해 정부는 중대재해처벌법 시행, 중대재해 저감 로드맵 구축 등의 다양한 노력을 하고 있다. 특히, 50인 미만 사업장, 공사금액 1억 미만 공사현장 등의 소규모 사업장에서는 업무상 사고 재해의 80%이상 발생하고 있으며 이를 저감하기 위한 실질적인 노력이 필요한 실정이다. 소규모 사업장에서는 안전보건관리자 선임, 안전보건 관리 규정 등이 전부 또는 부분적으로 제외된 상태로 이를 보완하고자 재해예방전문기관의 기술지도를 의무적으로 받고 있다. 본 연구에서는 소규모 사업장 안전보건기술지원사업의 안전, 화학, 보건, 건설 등의 분야별 문제점을 설문조사를 통해 파악하고 개선방안을 제시하고자 하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.59-66
• /
• 2012

Recently buildings are constructed in larger and higher scales and becoming more complex. Every country in the world is competing to build high-rise buildings. Korea also has and is constructing high-rise buildings, like the 123story Jamsil Lotte Super Tower. However from small to large scale buildings and on construction sites there still are fire safety accidents that occur continuously. Therefore to improve fire safety plan, examining the actual fire safety management and understanding fire risk analysis Using Fire Modeling through Computer Simulation. Fire safety management plan related fire safety cases were collected an dan analyzed for the study. Also hazard analysis of High rise Buildings under fire compared with existing fire law sand regulations.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.145-151
• /
• 2018

While commercialization of IoT technologies in the safety management sector is being promoted in terms of industrial safety of large indoor businesses, implementing a system for risk management of small outdoor work sites with frequent site movements is not actively implemented. In this paper, we propose an efficient dynamic workload balancing strategy which combined low-power, wide-bandwidth (LPWA) communication and low-power Bluetooth (BLE) communication technologies to support customized risk management alarm systems for each individual (driver/operator/manager). This study was designed to enable long-term low-power collection and transmission of traffic information in outdoor environment, as well as to implement an integrated real-time safety management system that notifies a whole field worker who does not carry a separate smart device in advance. Performance assessments of the system, including risk alerts to drivers and workers via Bluetooth communication, the speed at which critical text messages are received, and the operation of warning/lighting lamps are all well suited to field application.

• 산업기술연구
• /
• 제28권A호
• /
• pp.125-132
• /
• 2008

As of 2003, construction waste has been produced at the level of 130,614.8 tons/day, in which the amount of waste concrete was 92,639.1 tons/day and accounted for about 66.4% of the amount of construction waste. Waste concrete is mainly produced in construction work and civil engineering work. Especially, road surface crushing method using a large amount of water requires thorough management of concrete wastewater. The aim of this study was to analyze water pollution due to concrete wastewater generated in repair of bridge deck using road surface crushing equipment and to suggest reasonable countermeasures for solve the problem. In this study, it was surveyed current conditions of produced concrete wastewater in bridge deck repair, analyzed physical features of concrete wastewater, expected effects of water pollution on inflow rivers if it is not treated, established treatment plan of water pollution by categories, and calculated capacity of each treatment process and required amount of necessary chemicals. As a result of sampling wastewater generated in field sites and testing it at a lab scale, it was revealed that the original wastewater was produced in removing concrete from bridge deck slabs using surface crushing equipment whose pH was 12.53, CODMn was 12.910mg/L, SS was 547.0mg/L, and other heavy metals were included in extremely small quantities.

• 한국건설관리학회논문집
• /
• 제20권6호
• /
• pp.81-88
• /
• 2019

최근 정부는 재해 절감을 위한 다양한 노력덕분에 산업과 건설업 전반에 걸쳐 재해 사고는 감소추세를 보이고 있다. 그러나 건설업에서의 추락재해는 감소하지 않고 오히려 증가하고 있다. 특히, 달비계에 의한 추락재해는 매년 발생빈도는 낮지만 발생 시 작업자의 사망과 직결한다는 측면에서 재해강도가 매우 크다고 할 수 있다. 국내 건설업에서의 달비계 작업환경은 매우 열악하다. 더욱이 소규모 건설현장에서의 달비계 작업자들은 안전에 대한 감독과 관리를 받을 수 있는 주체가 없다. 따라서 본 연구는 본 연구를 진행하면서 달비계 추락재해 예방을 위해 가장 근본적으로 개선되어야 할 문제점인 수직구명줄 미설치 및 미부착이다. 또한 로프 풀림, 로프 파단, 고정점불량 등의 다양한 재해발생 원인에 대한 규명을 통해 건설현장 가설공사의 재해예방을 위한 해결방안이 되었길 희망한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1290-1297
• /
• 2008

A pipe jacking method complements the excavation method and it is a non-excavation method which is thrust in the earth. On that score, using the pipe jacking method is increased because of constructability and economical efficiency in a medium or small-sized pipeline construction. However, a pipe jacking method still has several problems that the base ground is disturbed and loosen. Especially, where some sites have boulders, gravels and foreign bodies, the foundation is brought about deformation, settlement and leakage of water. Thus, the end of the construction the ground should be reinforced by grouting and it occur with additional expenses. Therefore, a steel pipe jacking method with grouting, Grout In Pipe, is devised newly to complement the existing method. In this study, it describes a new method and verifies efficiency, an application and practicality of the method through a experimental construction.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.753-762
• /
• 2021

Google provides mapping services using satellite imagery, this is widely used for the study. Since about 20 years ago, research and business using drones have been expanding. Pix4D is widely used to create 3D information models using drones. This study compared the distance error by comparing the result of the road construction site with the DSM data of Google Earth and Pix4 D. Through this, we tried to understand the reliability of the result of distance measurement in Google Earth. A DTM result of 3.08 cm/pixel was obtained as a result of matching with 49666 key points for each image. The length and altitude of Pix4D and Google Earth were measured and compared using the obtained PCD. As a result, the average error of the distance based on the data of Pix4D was measured to be 0.68 m, confirming that the error was relatively small. As a result of measuring the altitude of Google Earth and Pix4D and comparing them, it was confirmed that the maximum error was 83.214m, which was measured using satellite images, but the error was quite large and there was inaccuracy. Through this, it was confirmed that there are difficulties in analyzing and acquiring data at road construction sites using Google Earth, and the result was obtained that point cloud data using drones is necessary.

• 원예과학기술지
• /
• 제35권3호
• /
• pp.323-332
• /
• 2017

Homology-specific transcriptional and post-transcriptional silencing, an intrinsic mechanism of gene regulation in most eukaryotes, can be induced by anti-sense, co-suppression, or hairpin-based double-stranded RNA. Hairpin-based RNA interference (RNAi) has been applied to analyze gene function and genetically modify crops. However, RNAi vector construction usually requires high-cost cloning steps and large amounts of time, or involves methods that are protected by intellectual property rights. We describe a more effective method for generating intron-spliced RNAi constructs. To produce intron-spliced hairpin RNA, an RNAi cassette was ligated with the first intron and splicing sequences of the Brassica rapa ssp. pekinensis histone deacetylase 1 gene. This method requires a single ligation of the PCR-amplified target gene to SpeI-NcoI and SacI-BglII enzyme sites to create a gene-specific silencing construct. We named the resulting binary vector system pKHi and verified its functionality by constructing a vector to silence DIHYDROFLAVONOL 4-REDUCTASE (DFR), transforming it into tobacco plants, and confirming DFR gene-silencing via PCR, RT-qPCR, and analysis of the accumulation of small interfering RNAs. Reduction of anthocyanin biosynthesis was also confirmed by analyzing flower color of the transgenic tobacco plants. This study demonstrates that small interfering RNAs generated through the pKHi vector system can efficiently silence target genes and could be used in developing genetically modified crops.