• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.4
• /
• pp.535-546
• /
• 2011

The study area investigated in this research is Hwaseong city, Gyeonggi-Do where small scale development is currently in progress. For the last three years, we carried out the environmental and ecological assessment by using data from The Ministry of Environment and Han River Basin Environmental Office. Most of development works in Hwaseong city, Gyeonggi-Do are small scale developments which are related with factory and distribution complex based on individual laws and regulations. However, environmental and ecological assessment is not being sufficiently reflected beforehand. Especially, because the development takes place mainly in the outskirts of the city, the fine forest is continuously being damaged. We analyzed changes in green zone area caused by the developments. As a result, the percentage of original green zone was decreasing while the percentage of artificial green zone was increasing. We should maintain the percentage of the original green zone in order to conserve natural environment. In the past three years, the damage of the DGN (Degree of Green Naturality) 7 area that has high conservative value was little, but, there was serious damage in the area of DGN 6. In order to conserve natural environment, political and institutional investigation should be seriously carried out for mitigation of environmental and ecological damages.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.619-630
• /
• 2009

The study area investigated in this research is Hwaseong city, Gyeonggi-Do where small scale development is currently in progress. For the last three years, we carried out the environmental and ecological assessment by using data from The Ministry of Environment and Han River Basin Environmental Office. Most of development works in Hwaseong city, Gyeonggi-Do are small scale developments which are related with factory and distribution complex based on individual laws and regulations. However, environmental and ecological assessment is not being sufficiently reflected beforehand. Especially, because the development takes place mainly in the outskirts of the city, the fine forest is continuously being damaged. We analyzed changes in green zone caused by the developments. As a result, the percentage of original green zone was decreasing while the percentage of artificial green zone was increasing. We should maintain the percentage of the original green zone in order to conserve natural environment. In the past three years, the damage of the DGN (Degree of Green Naturality, 7) area that has high conservative value was little, but, there was serious damage in the area of DGN 6. In order to conserve natural environment, political and institutional investigation should be seriously carried out for mitigation of environmental and ecological damages.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2254-2258
• /
• 2003

In recent years, the case to install small water treatment facility to every local area has increased. A key issue in the successful implementation of the control systems for the water treatment plants is the choice of control architecture. Within the framework of distributed control system(DCS), this paper presents a new development of intelligent control module and its novel application to open control architecture for water treatment plants. This control system so called NCS(Network Based Control System) with standard networks system with LonTalks protocol of ANSI/EIA 709.1, regulatory control function and information dispatch function has suitable functionality to operate these distributed water treatment facility effectively. This paper describes the case where NCS is applied for the filters system in water treatment facility of Heong Sung area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.576-579
• /
• 1997

In order to repair sewage pipes, it is necessary to dig up the damaged sewage pipes, which results in traffic jams. Since digging up the pipes takes too much time and cost, this method is inefficient. So, in stead of digging up the damaged pipes, a robot is sent down to the pipe to do the repair works. For big pipes, human workers go into the pipe and do to repair works, but for small pipes, it is impossible for human worker to go inside the pipe. In this case, mobile robots have used. The procedures for repairing pipes are as follows : First, the condition of the sewage pipes is observed by a robot. Second, appropriate steps for repair are determined according to the types of the damage. While repairing procedures, a newly-developed packer is sent into the sport to be repaired inside the pipe. Then, the packer is filled with air by a V-shaped wrinkel pipe. This makes the packer inflates uniformly and adhere closely to the inside wall of the pipe in large area. This increases the area that can be repaired. Therefore, the newly-developed packer will be very helpful for sewage pipe repair works.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.950-952
• /
• 2004

The developments of small hydropower plants in korea have been delayed by rising construction cost/low feasibility, local people's disagreement even though the capacity of water resources are enough. However, the recent raising of electricity purchasing price, the government's enlarging plan of small hydropower plants caused the newly development to be accelerated. In this paper, the design of remote control of small hydropower plants are proposed for better economy and easy control. The operation and monitoring of power plants are planned based on One(1)-man control from the central control room of regional area water works/ operating station and engineering station multipurpose dam offices with the equipments of OS, RTU(PLC), KT leased lines, WMPS, CSU and etc.

• Journal of Korean Home Economics Education Association
• /
• v.3 no.1
• /
• pp.113-129
• /
• 1991

This study was conducted to compare the outward aspects, objectives, and the contents of Home Economics text books of middle schools of Korea, Japan, U.S.A. and England. The results were summarized as follows. 1. The outward aspects of tex books： The Korean text books were small in size and the quality of paper was inferior to those of foreign countries. The Japanese text books were written by many authors, contained many lab works and data. Text books of U.S.A. were big in size made with good quality paper and contained many colour pictures. Text books England contained many problems and lab works. 2. Objectives of the Home Economics and Unit objectives： The objective of the subjects of Home Economics was written only in Korean text books. The unit objectives were described most concretely and detailedly in Korean text books comparing with other countries. 3. Contents： Korean text books covered all six areas of foods, clothings, housing, home management, family and occupation and theoretical explanations prevailed. Japanese text books contained numerous lab works, lacked two areas of home management and occupation, thecontents included a few practical lab works two areas of home management and occupation, the contents included a few practical lab works. In the text books of U.S.A. contained all six areas of Home Economics were covered and special emphasis was placed on self discovory and self development, and vocational guidance was also stressed. The text book of England contained only three areas of Home Economics, clothing, foods and housing； the number of area was limited but the basic theories of covered area was intended to lead to self comprehension through questions and lab works.

• Journal of Navigation and Port Research
• /
• v.38 no.6
• /
• pp.673-681
• /
• 2014

Due to the increased demand for safety and security requirements on the port infrastructure, the harbor tranquility is one of the important parameter in the mooring basin of harbor. It relates keenly to berthing/unberthing and cargo handling works but also it is an important indicator to get the minimum water area as the safe refuge. Hupo harbor is a national coastal harbor located in east coast of Korea and a development plan for a new marina near the entrance is being carried out including berth layouts, breakwater extensions, 300m marina berths, dredging and land reclamation works. The new plan will impact on calmness of the existing port. Therefore, it is necessary to analyze in complex the variation of wave height and direction caused by wave refraction, diffraction, shoaling and reflection from the incident waves from outside the harbor. In order to check the calmness inside a harbor, the numerical models are being used currently need fundamental reviews according to the difference of results which depend on their respective features. In this study, hence, it was introduced the validity of numerical models by comparing the computational results with the hydraulic model experiment. The current investigations contribute to the existing development recommendations and provide further solutions for port planning.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.343-357
• /
• 2008

Hongdo and Huksando belong to the Dadohae national park parks in Korea and are famous sightseeing spots in Shinahn-gun. One of the keystone species in this area is otter (Lutra lutra). We accomplished field works for finding its present habitat and condition analyses for the potential habitat in the area via spatial analyses with digital elevation model and satellite imagery. Isolated condition with coastal cliffs was one of the superior conditions over habitat in the main land, but the road kills of small animals were also observed. Three underground eco-corridors were suggested for the protection of otter habitat in the Shinahn-gun area. Regional development strategies of Shinahn-gun should be focused on the protection of safe and pristine habitat for otter population.

• Journal of Welding and Joining
• /
• v.21 no.1
• /
• pp.42-47
• /
• 2003

Stainless rolling stocks are usually fabricated by spot welding process without painting. Indentation on the surface of the car body after spot welding injures the beauty of the stainless rolling stocks. In this study, insulated electrode tips to reduce the indentation are developed and applied to the actual spot welding works. The developed tips are composed of head, neck, hole for cooling water, body and resistance material. They provide large surface contact area with the base materials during spot welding and enhance the current density by necking. Experimental results using the developed tips show that small indentation and sufficient tensile shear strength is produced due to large contact area and enhanced current density.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.386-391
• /
• 2002

Stainless rolling stocks are usually fabricated by spot welding process without painting. Indentation on the surface of the car body after spot welding injures the beauty of the stainless rolling stocks. In this study, electrode tips to reduce the indentation are developed and applied to the actual spot welding works. The developed tips are composed of head, nut hole far cooling water, body and resistance material. They provide large surface contact area with the base materials during spot welding and enhance the current density by necking. Experimental results using the developed tips show that small indentation and sufficient tensile shear strength is produced due to large contact area and enhanced current density.