• 항공우주시스템공학회지
• /
• 제6권2호
• /
• pp.1-6
• /
• 2012

On this study, as a Human Factor(HF)'s point of view, typical PVI(Pilot Vehicle Interface) evaluation for small airplane cockpit design, PVI evaluation items and procedures to show compliance to KAS Part 23 "Airworthiness Standards : Normal, Utility, Acrobatic, And Commuter Category Airplanes" are introduced and reviewed. This study is based on the experience of Korean small civil airplane development and certification program.

• 항공우주시스템공학회지
• /
• 제7권2호
• /
• pp.15-22
• /
• 2013

The conformity of propulsion system need to be evaluated thorough the flight test because it is an important part of the airplane to ensure the flight safety. In the small airplane development, the flight test according to KAS(Korean Airworthiness Standards) Part 23 is one of the ways to verify compliance in terms of satisfactory aircraft/engine/propeller integration. This thesis introduces means of verifying the compliance and test requirement of KAS Part 23 for the conformity of the propulsion system in small airplane. It also describes procedures and methods of propulsion system flight test through KC-100 airplane project.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.39-44
• /
• 2013

On this study, climb performance related airworthiness requirements for small airplane on KAS Part 23 and flight test techniques for climb performance (Sawtooth climb) are introduced. Also, applicable procedures, test conditions and required test parameters of sawtooth climb flight test techniques are reviewed.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.22-26
• /
• 2016

Whole airplane recovery parachute system(WARPS) is a auxiliary safety system to protect occupants in emergency situation where recovery to normal flight condition is impossible. In this paper, application and certification cases of WARPS for Part 23 small airplane is introduced and considerations in certification of the WARPS installed airplane are provided in terms of performance of parachute, function and operation, loads and strength and protection of occupants.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.473-494
• /
• 2023

This article introduces a formalism for the analysis of airplane trajectories on which the motion is determined by specifying the power of the engines. It explains a procedure to solve the equations of motion to obtain the value of the relevant flight parameters. It then enumerates the constraints that the dynamical abilities of the airplane impose on the amount of fuel used, the speed, the load factor, the lift coefficient, the positivity and upper boundedness of the power available. Examples of analysis are provided to illustrate the method proposed, with rectilinear and circular trajectories. Two very different types of airplanes are used in the examples: a Silver Fox-like small UAV and a common Cessna 182 Skylane.

• 항공우주시스템공학회지
• /
• 제5권2호
• /
• pp.1-7
• /
• 2011

On this study, applicable aircraft pitot-static system airworthiness requirements and flight test techniques for PEC(Position Error Correction) to KAS Part 23 airworthiness standards are introduced. Also, pros and cons, applicable test conditions, test procedures and required test parameters of each flight test techniques are reviewed on this study.

• 한국항공운항학회지
• /
• 제5권1호
• /
• pp.17-30
• /
• 1997

FAR 23, AC 23-8, 그리고 Order 8110.7을 이용하여 경비행기의 비행 시험 절차에 대한 연구를 수행하였다. 본 연구에서는 창공-91의 비행 시험을 통한 경험을 바탕으로 형식증명을 위한 주요 절차에 대한 연구를 수행하였다. 본 연구는 소형 비행기의 제작자, 항공관련 기술자, 비행 시험 기술자, 비행 시험 조종사, 그리고 관련 정부 관계자들에게 비행 시험에 관련된 기준을 이해하도록 하기 위해 수행된 연구이다. 본 연구에서 비행 시험 방법과 절차는 주로 소형 비행기의 형식증명에 관련된 것으로 관련자들에게 큰 도움이 될 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.207-212
• /
• 2017

우리나라 민간 소형 비행기 동력장치의 감항기준은 KAS Part 23(소형 비행기)과 Part 33(엔진)에서 규정하고 있다. 이 기준은 미연방항공청(FAA)의 FAR Part 23 및 Part 33과 유럽항공안전청(EASA)의 CS-23 및 CS-E와 동등한 체계를 갖는다. FAA와 EASA는 소형 비행기의 감항기준을 전면 개정하였다. 설계 방식과 적합성 입증방법을 지정한 규범적 규정에서 안전한 성능을 달성하도록 목표를 지정하는 성능기반형 규정으로 전환한 것이다. 이러한 개념적 전환에 따라 동력장치 감항기준 또한 기존의 요건에서 대폭 변경되었다. 이에 따라 FAA의 동력장치 인증요건 개정 사항을 살펴보고 우리나라의 감항기준 개정 방향을 고찰하였다.

• 한국항공운항학회지
• /
• 제28권1호
• /
• pp.59-65
• /
• 2020

This paper presents comparative results of configuration modeling and aerodynamic analysis to single-engine airplanes such as C-172, SR-20, and DA40NG. The software OpenVSP was used as an airplane configuration modeling tool. OpenVSP can provide the fastest method to get three-dimensional aircraft configuration from given basic data and drawings of aircraft. Parametric design input in OpenVSP, from given aircraft geometric parameters, was applied to small airplanes mentioned. New aircraft models in this study were reversely designed to coincide with the publicly obtained dimensions of the original aircraft. The basic aerodynamic analysis of newly designed modeling aircraft was performed by the vortex lattice method. Results are shown that the similarity of aerodynamic data obtained except for the lack of DA40NG. In conclusion, the modeling process applied to this work is valuable to obtain conceptual design insight in the reverse design from the small airplanes currently in use for flight training.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.920-925
• /
• 1993

For a multi-input, multi-output system, it is widely known that feedback control gain presents extra freedom pole placement problem. An eigenstructure assignment utilizes this freedom for assignment of all or some elements of the closed-loop eigenvectors. In this paper, a nonlinear optimization technique is adopted to obtain a small gain controller that assigns closed-loop eigenvalues and elements of eigenvectors simultaneously. To illustrate the approach, a numerical example of the Airplane mode decoupling using an advanced fighter is shown.