• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.27-36
• /
• 2003

The Electro-Rheological (ER) fluid has been used to the ultraprecision polishing of single crystal silicon as new polishing slurry whose properties such as yield stress and particle structure changed with the application of an electric field. In this work, it is aimed to find the effective parameters in the ER fluid on material removal in the polishing system whose structure is similar to that of the simple hydrodynamic bearing. The generated pressure in the gap between a moving wall and a workpiece, as well as the electric field-induced stress of the mixture of ER fluid-abrasives, is evaluated experimentally, and their influence on the polishing of single crystal silicon is analyzed. Moreover, the behavior of abrasive and ER particles is described.

• International Journal of Precision Engineering and Manufacturing
• /
• 제5권2호
• /
• pp.32-38
• /
• 2004

The electrorheological(ER) fluid has been used to the ultraprecision polishing of single crystal silicon as new polishing slurry whose properties such as yield stress and particle structure changed with the application of an electric field. In this work, it is aimed to find the effective parameters in the ER fluid on material removal in the polishing system whose structure is similar to that of the simple hydrodynamic bearing. The generated pressure in the gap between a moving wall and a workpiece, as well as the electric field-induced stress of the mixture of ER fluid-abrasives, is evaluated experimentally, and their influence on the polishing of single crystal silicon is analyzed. Moreover, the behavior of abrasive and ER particles is described.

• 콘크리트학회지
• /
• 제14권3호
• /
• pp.58-63
• /
• 2002

한국가스공사(주)에서는 수도권의 천연가스 수요에 대응하기 위하여, 사진에서 보는바와 같이, 인천송도 앞 바다 8km 지점에 위치한 30만평의 인공 섬에 1993년부터 2000년까지 10기의 지상식 LNG 저장탱크를 건설하였으며 1998년부터 8기의 지하식 탱크가 건설 중에 있다. LNG 저장탱크는 다른 토목구조물과는 달리 초저온성과 고도의 안정성을 필요로 한다. 즉, -162$^{\circ}C$의 초저온 상태를 유지해야하는 보냉 구조와 가연성 가스에 대한 충분한 수밀성 및 안정성을 기본적으로 가져야 한다. 특히 지하식 탱크는 지상식 탱크 공사비와 비슷하며 주변의 경관 및 환경에 조화시키며 안정성이 높은 것이 특징이다.(중략)

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.52-57
• /
• 2000

Recently large capacity of electric equipment and increasing in atomic power generation are shown. One of the reason is shortage of the electric power supply for air conditioning load during summer. And every consumer is concerning about economical refrigeration and air conditioning system to decreases electric power consumption and decrease in global warming. For these necessities, ice making thermal storage system is required. Therefore, in this paper, the possibility of continuous slurry ice making using flowing organic water solution in cooled circular tube has been investigated. The experiments was carried out under some parameters of concentration and velocity of water solution, temperature of cooled tube wall, and control pressure in tube, As a result, four types of operating conditions in the pipe, that was supercooling, continuous ice making, intermittent ice making and ice blockage, were classified . And it was found that the critical condition for continuous ice making was acquired as a function of these experimental parameters.

• 기술사
• /
• 제15권2호
• /
• pp.3-15
• /
• 1982

The study on prevention measures for vibration and excavation of tunnel for the #3, #4, Seoul Subway. In the Seoul subway tunnel blasting, the drilling pattern and prevention method to seismic vibration are as follows as well as for adaptions of NATM, the supportings of roof and wall holes are arranged with control blasting. 1. The blasting is executed basically using the low velocity explosive such as slurry, Nitrate ammonium explosive, and F-I and F-II explosive for control blasting substituting of existing dynamite. 2. The cut holes are arranged with burn cut pattern and also must be arranged with M/S electrical delay caps substituting of ordinary do]ay caps. 3. Jack leg drills are used in Five Job sites and a jumbo drill in one job site. 4. In performance of safety work and in maintenance of building safety. The drilling length for blasting will not exceed 1.20 meter for round so that the vibration value shall carry below 0.3cm/sec. The harmonizing of better powder, better drilling machine and better technique is only the way of improving tunnelling efficiency and less vibration will help the dereasing of accidence.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.121-131
• /
• 1996

Recently, circulating liquid fluidized bed heat exchangers are widely used in a number of places - chemical, process, food concentration, waste water treatment facilities, etc. In a circulating heat exchanger, solid particles circulate with the liquid, thereby increase the heat transfer and reduce the fouling potential of the heat exchanger. In this study, glass beads were circulated through a vertical tube. The pressure loss and the heat transfer coefficient were measured. At low flow velocities, glass beads enhanced the heat transfer considerably. The enhancement increased as the volume fraction of the glass beads increased. It also increased as the particle diameter increased. The pressure loss showed a similar trend. From the observed particle behavior near tube wall, a possible explanation of the trend is provided.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.673-678
• /
• 2002

Laboratory calibration chamber tests for cone penetrometers, pressuremeters and dilatometers in cohesionless soil specimens have been conducted by numerous researchers. However, there have been only few applications to compacted or preconsolidated cohesive soils. Therefore, for the first time, Calibration Chamber System was developed in Korea University. This can be attributed to the extremely time consuming and laborious process involved in the preparation of large cohesive soil specimens in addition to other complexities involving instrumentation for pore pressure monitoring and the need for maintaing saturation by back pressure. Chamber System with similar principle as LSU Chamber System was made of more strengthen and complementary form by increasing system diameter(1.2m), carrying out 1st and 2nd consolidation process in one system for smooth and safe work, accurate Data Aquisition.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.419-426
• /
• 2015

본 연구는 지하식 LNG 저장탱크의 시공에 앞서 연약지반의 개량을 위하여 현장 원위치의 흙과 시멘트, 벤토나이트 등을 사용하는 소일-시멘트 연속벽체를 효과적으로 시공하는 SMW 공법에 대한 배합설계 및 현장적용 사례를 실험적으로 규명하기 위한 것이다. 현장조건을 고려하여, 보통 포틀랜드 시멘트와 벤토나이트를 주재료로 선정하였고, 흙의 단위용적중량은 $1,833kg/m^3$을 적용하였으며, 이에 따른 물-시멘트비 4종류와 배합속도 3수준을 대상으로 블리딩 및 압축강도 실험을 실시하였다. 실험은 실내실험 및 현장적용 사례로 나누어 수행되었으며, 실험을 통하여 얻은 결론은 다음과 같다. (1) 물-시멘트비가 감소할수록, 배합속도(rpm)이 증가할수록, 블리딩량 및 블리딩율이 감소하는 것으로 나타났다. (2) 물-시멘트비 150% 이하에서 현장적용강도(1.5 MPa)를 만족하였으며, 현장 코아강도는 공시체 강도에 비해 8~23% 증가하였다. 따라서 적용현장 조건을 고려하여 단위시멘트량 $280kg/m^3$, 벤토나이트 $10kg/m^3$, 물-시멘트비 150%, 그리고 배합속도 90 rpm을 현장시공의 최적배합으로 제안하였으며, 현장적용 사례의 실험결과로부터 요구되는 성능을 만족하였다.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.446-450
• /
• 2012

In order to fabricate the porous Mo with controlled pore characteristics, unique processing by using $MoO_3$ powder as the source and camphene as the sublimable material is introduced. Camphene-based 15 vol% $MoO_3$ slurries, prepared by milling at $50^{\circ}C$ with a small amount of dispersant, were frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene during drying in air for 48 h. The green body was hydrogen-reduced at $750^{\circ}C$, and sintered at $1000-1100^{\circ}C$ for 1 h. After heat treatment in hydrogen atmosphere, $MoO_3$ powders were completely converted to metallic W without any reaction phases. The sintered samples showed large pores with the size of about $150{\mu}m$ which were aligned parallel to the camphene growth direction. Also, the internal wall of large pores and near bottom part of specimen had relatively small pores due to the difference in the camphene growth rate during freezing process. The size of small pores was decreased with increase in sintering temperature, while that of large pores was unchanged. The results are strongly suggested that the porous metal with required pore characteristics can be successfully fabricated by freeze-drying process using metal oxide powders.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.12-18
• /
• 2019

Fluid jet polishing is a method of jetting a fluid to polish a concave or free-form surface. However, the fluid jet method is difficult to form a stable polishing spot because of the lack of concentration. In order to solve this problem, MR fluid jet polishing system using an abrasive mixed with an MR fluid whose viscosity changes according to the intensity of a magnetic field is under study. MR fluid jet polishing is not easy to formulate for precise optimal conditions and material removal due to numerous fluid compositions and process conditions. Therefore, in this paper, quantitative data on the factors that have significant influence on the machining conditions are presented using various simulations and the correlation studies are conducted. In order to verify applicability of the fabricated MR fluid jet polishing system by nozzle diameter, the flow pattern and velocity distribution of MR fluid and polishing slurry of MR fluid jet polishing were analyzed by flow analysis and shear stress due to magnetic field changes was analyzed. The MR fluid of the MR fluid jet polishing and the flow pattern and velocity distribution of the polishing slurry were analyzed according to the nozzle diameter and the effects of nozzle diameter on the polishing effect were discussed. The analysis showed that the maximum shear stress was 0.45 mm at the diameter of 0.5 mm, 0.73 mm at 1.0 mm, and 1.24 mm at 1.5 mm. The cross-sectional shape is symmetrical and smooth W-shape is generated, which is consistent with typical fluid spray polishing result. Therefore, it was confirmed that the high-quality surface polishing process can be stably performed using the developed system.